c9800-RESTCONF

Abstract

C9800 can be accessed from RESTCONF using YANG model. But YANG model is very difficult to find the correct url and parameters. So I created the C9800 API wrapper. This is useful for the c9800 API beginner because you don't have to care about IOS-XE YANG model.

Installation

Clone the repo

git clone https://github.com/dmatsumu/c9800-RESTCONF

Go to your project folder

cd c9800-RESTCONF

install virtualenv via pip

pip install virtualenv

Create the venv

python3 -m venv .

Activte your venv

source ./bin/activate

Install requirements.txt

pip3 install -r requirements.txt

Usage

Setup config.json

You need to input the below parameter into "config.json" file according to your environment.

username
password
<WLC_ip_address> in base_url

Import getApInfo.py and getClientInfo.py to your code

You need to import "getApInfo.py" and "getClientInfo.py" into your python code. Please refer to the sample_code.py, if you need a sample.

getApInfo.py Function list

def get_ap_list():

display APs under the WLC

def get_wlan_list():

display WLANs under the WLC

def get_ap_radio_oper_info(wtp_mac, radio_slot_id):

display AP radio operation info from "Cisco-IOS-XE-wireless-access-point-oper:radio-oper-data"

def get_ap_oper_info(wtp_mac):

display AP operation info from "Cisco-IOS-XE-wireless-access-point-oper:oper-data"

def get_wtp_mac_by_ap_name(ap_name):

display AP MAC address from "Cisco-IOS-XE-wireless-access-point-oper:ap-name-mac-map"

def get_wlan_id_by_wlan_profile_name(wlan_profile_name):

display WLAN ID from "Cisco-IOS-XE-wireless-wlan-cfg:wlan-cfg-entry"

def get_ssid_counters(wtp_mac, radio_slot_id, wlan_id):

display ssid counters info from "Cisco-IOS-XE-wireless-access-point-oper:ssid-counters"

def get_capwap_data(wtp_mac):

display CAPWAP info from "Cisco-IOS-XE-wireless-access-point-oper:capwap-data"

def get_rrm_oper_info(wtp_mac, radio_slot_id):

display RRM operation info from "Cisco-IOS-XE-wireless-rrm-oper:rrm-oper-data"

def get_ap_info_by_ap_name_slot_id(ap_name, radio_slot_id):

dispaly AP summary info from many sources with AP name and radio slot number

def get_ap_info_by_ap_name(ap_name):

dispaly AP summary info from many sources with AP name ONLY

getClientInfo.py Function list

def get_common_oper_data():

display Client common operation data under the WLC

def get_dot11_oper_data():

display Client dot11 operation data under the WLC

def get_traffic_stats():

display Client traffic stastics under the WLC

def get_sisf_db_mac():

display Client ip mac binding table under the WLC

def get_dc_info():

display Client device info under the WLC

def get_common_oper_data_by_mac(client_mac):

display Client common operation data by mac under the WLC

def get_dot11_oper_data_by_mac(client_mac):

display Client dot11 operation data by mac under the WLC

def get_traffic_stats_by_mac(client_mac):

display Client traffic stastics by mac under the WLC

def get_sisf_db_mac_by_mac(client_mac):

display Client ip mac binding table by mac under the WLC

def get_dc_info_by_mac(client_mac):

display Client device info by mac under the WLC

def get_client_ip_by_mac(client_mac):

display Client IP address by mac

def get_client_mac_by_ip(ip_address):

display Client MAC address by Client IP

def get_client_mac_by_username(username):

display Client MAC address by username

def get_client_summary_by_ip(ip_address):

dispaly Client info summary by Client IP

def get_client_summary_by_username(username):

dispaly Client info summary by Client username

Notes

This python code is build in my lab environment. Please note that errors may occur depending on the environment.
If you want to use "ssid-counters", you need to edit your c9800's AP join profile configuration according to the following.

no statistics traffic-distribution
bssid-stats
bssid-stats bssid-stats-frequency 30

History

release (2024/1/5)
AP information is updated. (2024/1/10)
Client information is up. (2024/1/10)
Client information is updated. (2024/1/11)
Client information is updated. (2024/1/17)
Client information is updated. (2024/1/19)
Change error handling on AP and Client python (2024/2/7)

dmatsumu / c9800-restconf Goto Github PK

c9800-restconf's Introduction