doctor3w/hls-cryptography-accelerator

A crypto accelerator written for HLS to an FPGA that actually makes it slower than running it on your computer

HLS Crypto Accelerator: AES+RSA+SHA

This project is composed of three subprojects: AES, RSA, and SHA. Each of these projects were build for use on the Zedboard's Xilinx Zynq-7000.

AES

The entire AES implementation is in the aes directory:

• aes.cpp: The optimized synthesizable AES CTR implementation.
• aes.h: The header containing some definitions for the AES implementation including 128, 192, or 256 key sizes as well as the number of blocks that will be encrypted with the FPGA.
• aes_test.cpp: The AES test file for csim.
• aes-sw.c/aes-sw.h/test-sw.c: The embedded software optimized version from tiny-AES-c.
• data: Directory containing the random bytes and the encrypted solutions.

The Makefile contains all the commands necessary to build the software.

• make: Builds and runs the aes.cpp file.
• make sw: Builds and runs the optimized AES program.
• make fpga: Builds and runs the host file for communicating with the FPGA once the bitstream has been loaded.
• make bitsream: Runs the bitstream making script.

Running vivado_hls -f run.tcl will synthesize the software.

RSA

The entire RSA implementation is in the rsa directory:

• big_ap_int.h: header used to include ap_int safely.
• bignum.h: header containing large number arithmetic library.
• fpga_rsa.h, fpga_rsa.cc: top-level design under test
• fpga_timer.h: wall-clock based timer for FPGA performance analysis.
• sim_timer.h: CPU time based timer for software performance analysis.
• host.h: small library for xillybus communication.
• mpz_adapters.h: algorithms to convert between Bignum and mpz_t types.
• pragmas.h: macros for controlling HLS pragmas
• rsa.cc: main program, which encrypts a small message
• rsa_config.h: contains macro definitions which define RSA key sizes and such.

There are some additional files as well:

• data: a directory containing final benchmarking data.
• format.sh: a formatting script.
• bench: a benchmarking script.
• gmp-link-directive and vivado-include two helper scripts which allow using the same makefile on both the ZedBoard and x86 machines.
• run_bitstream.sh: modified bitstream script which takes a project name as a parameter.
• run.tcl: main tcl file.

The Makefile contains all the command necessary to build the software:

• make: builds optimized software version (rsa).
• make MODE=FPGA_SIM: builds a software version which runs the synthesizable code (rsa-sim).
• make MODE=FPGA_REAL: builds a software version which communicates with the FPGA (rsa-host).

Running vivado_hls -f run.tcl will generate rsa.prj. Running ./run_bitstream rsa will generate the bitstream, rsa.bit.

SHA

The entire HLS implementation can be found symlinked in the ecelinux directory:

• SHA512.cpp/SHA512.h: Contains the SHA-512 implementation wrapped in the SHA512Hasher class
• unix_cracker.cpp/unix_cracker.h: Contains the Unix crypt() implementation
• main.cpp: The HLS entry point (dut())
• helpers.cpp/helpers.h: Several basic helper functions
• unix_cracker_test.cpp: The csim test program

The Zedboard's host program can be found in the zedboard directory.

Building

To generate the bitstream, run "vivado_hls run.tcl" in the ecelinux directory. Note you must be using the 2017 version. The bitstream can be generated afterwards with the ./run_bitstream.sh script.

To generate the Zedboard's host program, run make in the Zedboard directory.

Running

Flash the bitstream to a Zedboard, then excute the host program that was compiled in the previous step.

hls-cryptography-accelerator's Issues

AES bitstream generation error

Thanks for providing your project online, I was trying to reproduce the aes accelerator but apparently part of the project named as "zedboard_project.tgz" is missing. Can you please connect me to the code?