Monitoring for bonding network interfaces based on diamond collector and llpd.
Simply install package via pip:
pip install diamond-ifcbondcollector # or # python setup.py install
or with deb
make deb dpkg -i ./bin/diamond-ifcbondcollector_2.0.0_amd64.deb
Collector requires following packages to be installed:
- Python2 (>=2.7)
- diamond
- lldpd
Default configuration
enabled = True ifc_name = "bond0"
Extended configuration with rules collector will check if the designated network interfaces are connected to the correct network device (interface names must be the same as those available from lldpctl).
In this example we check if eth0 is connected to switch with name test_name_switch1, and eth1 to test_name_switch2. Below configuration matches switch by chassis_name - a field fromm llpdctl output, you can specify to test against different field eg. chassis_mac, port_descr etc.
enabled = True ifc_name = "bond0" eth0_on_sw1 = eth0, chassis_name, test_name_switch1 eth1_on_sw2 = eth1, chassis_name, test_name_switch2 rules = eth0_on_sw1, eth1_on_sw2
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent