drincann/pico-go

Raspberry Pi Pico support for VS Code

Plase see this repo paulober/Pico-W-Go

Pico-Go VS Code Extension

Pico-Go provides code auto-completion and allows you to communicate with your Raspberry Pi Pico board using the built-in REPL console. Run a single file on your board, sync your entire project or directly type and execute commands.

This software is originally a derivative product of Pymakr by Pycom Ltd under the terms of its GNU GPL Version 3+ license but it has now received significant rewrites. Non-RP2040 boards are not supported but may still work.

• Works with macOS, Linux, and Windows.
• Connects to the Raspberry Pi Pico board.

To find out what's new, take a look at the changelog.

Dependencies

• Python 3 installed on your system and in your PATH.

Getting Started

Have the onboard LED flashing in under 5 minutes by following the Quick Start guide over on the Pico-Go web site.

pico-go's Issues

Pico-Go doesn't work on macOS

Using VSC Version: 1.71.0-inside on macOS 12.5. Python 3.9.1 installed
After install the toolbar is missing. Getting following error using command line.

Pico-Go status bar is visible in non-pico projects

What are the steps to reproduce this issue?

1. Install extension
2. Open any folder in VSCode

What happens?

The Pico-Go status bar appears, no matter if the current folder is a Pico project or not.

What were you expecting to happen?

I would expect the Pico-Go extension, to be loaded only if I'm inside a Pico project.

Any logs, error output, etc?

(If it’s long, please paste to https://gist.github.com and insert the link here)

Any other comments?

Support info

Copy this from the Pico-Go > Help > Get support info option in the command palette:

Get support info" does not print anything into console.

Extension not working with VSCode 1.71.0 [Linux]

What are the steps to reproduce this issue?

1. Update to latest VSCode 1.71.0 on linux
2. Try to execute any command (e.g. Upload current file only)

What happens?

An error window pops up: "command 'picogo.uplodFile' not found"

What were you expecting to happen?

File upload

Any logs, error output, etc?

(If it’s long, please paste to https://gist.github.com and insert the link here)

Support info

Copy this from the Pico-Go > Help > Get support info option in the command palette:

This command also yields a "command not found error"

< Paste Here >

Update to latest MicroPython (1.19.1)

What are the steps to reproduce this issue?

1. Create new project
2. Generate project configuration via the plugins command

What happens?

MicroPython 1.15.0 is added to the project for IDE assistance.

What were you expecting to happen?

Latest MicroPython is added to the project

Any other comments?

Latest version is needed for support of the Raspberry Pi Pico W and it's new functions like networking.