dukus / digicamcontrol Goto Github PK

View Code? Open in Web Editor NEW

648.0 65.0 223.0 711.74 MB

DSLR camera remote control open source software

Home Page: http://digicamcontrol.com/

License: Other

HTML 1.79% JavaScript 1.17% C# 95.09% NSIS 0.30% CSS 0.47% Batchfile 0.08% C++ 1.08% PowerShell 0.03%

digicamcontrol's Introduction

For developers visit http://www.digicamcontrol.com/doc/development/lib

digiCamControl

DSLR camera remote control open source software

============== Code transfered from : https://code.google.com/p/nikon-camera-control/

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

digicamcontrol's People

Contributors

Stargazers

Watchers

Forkers

kwagalajosam superflysinz tomriddle1234 kushi25 ddieffen athmoon p-dizzle rainlabs-eu wannessels tworedcells d-cabral justinfoxmail mihigyver bygreencn p7ayfu77 arvindpereira jesuslg123 loof show027 gitter-badger felixtrusheim drikus vmlorenzi labcosium arex-shadow twc-toddsmith modulexcite viviliao stblinux elix22 filthiest legendvijay jeff-loughlin slayer-nova tosato3 sgologuzov sycraft flycooler cadelaren ataheri xcshawn bstrauss3 lukefrench adamrosebrock zobairq chinaboy2277 cstack89 pragunvohra nitehauck arun-art06 wanglch vboerjan tongxuan jetzfly markiodev wildgenie afandiyusuf whatevercoding ellaisys markcupitt mjmarcoux asllamas gmz leoliusg benfounder masterpic javierpuntonet autumnm1981 gottdammer titaye zoombapup csuffyy weede connorsummeril tenwx bogdanbujdea xlee cody1988 imagolive fotoguy42 samh11 nagyist jaiminajmeri okutane othebault imranm847 raydtang dregula mamaun lorrcan ishankaushikcm devteamtc edlward kavinhan veenlee simonlopez tszyeung devopsmi jokalee hibive

digicamcontrol's Issues

Only current file is deleted when more that one are selected

Capture to pc transfer mode not always show up

Crash-Application crash Shutdown was already called on this object

at PortableDeviceApiLib.PortableDeviceClass.SendCommand(UInt32 dwFlags, IPortableDeviceValues pParameters, IPortableDeviceValues& ppResults)
at PortableDeviceLib.StillImageDevice.ExecuteWithNoData(Int32 code) in d:\devel\vs2010\CameraControl\PortableDeviceLib\StillImageDevice.cs:line 39
at CameraControl.Devices.BaseMTPCamera.ExecuteWithNoData(Int32 code, Int32 loop, Int32 counter) in d:\devel\vs2010\CameraControl\CameraControl.Devices\BaseMTPCamera.cs:line 338
at CameraControl.Devices.BaseMTPCamera.ExecuteWithNoData(Int32 code) in d:\devel\vs2010\CameraControl\CameraControl.Devices\BaseMTPCamera.cs:line 288
at CameraControl.Devices.Nikon.NikonBase.DeviceReady(Int32 retrynum) in d:\devel\vs2010\CameraControl\CameraControl.Devices\Nikon\NikonBase.cs:line 1673
at CameraControl.Devices.Nikon.NikonBase.DeviceReady() in d:\devel\vs2010\CameraControl\CameraControl.Devices\Nikon\NikonBase.cs:line 1658
at CameraControl.Devices.Nikon.NikonBase.CapturePhotoNoAf() in d:\devel\vs2010\CameraControl\CameraControl.Devices\Nikon\NikonBase.cs:line 1242
at CameraControl.windows.LiveViewWnd.Capture() in d:\devel\vs2010\CameraControl\CameraControl\windows\LiveViewWnd.xaml.cs:line 943
at CameraControl.windows.LiveViewWnd.ExecuteCommand(String cmd, Object param) in d:\devel\vs2010\CameraControl\CameraControl\windows\LiveViewWnd.xaml.cs:line 1312
at CameraControl.windows.LiveViewManager.ExecuteCommand(String cmd, Object param) in d:\devel\vs2010\CameraControl\CameraControl\windows\LiveViewManager.cs:line 135
at CameraControl.Core.Classes.WindowsManager.ExecuteCommand(String cmd, Object o) in d:\devel\vs2010\CameraControl\CameraControl.Core\Classes\WindowsManager.cs:line 75
at CameraControl.windows.LiveViewWnd.button2_Click(Object sender, RoutedEventArgs e) in d:\devel\vs2010\CameraControl\CameraControl\windows\LiveViewWnd.xaml.cs:line 956

Support for DSLRDASHBOARDSERVER

Use wifi router to control Nikon DSLR
http://dslrdashboard.info/dslrdashboardserver-ddserver/
http://digicamcontrol.com/forum/feature-requests/wifi-support-once-again

Focus stacking not working for Canon cameras

Application block when raw+jpg is selected in live view

Application crash The image data generated an overflow during processing.

at System.Windows.Media.Imaging.WriteableBitmap..ctor(Int32 pixelWidth, Int32 pixelHeight, Double dpiX, Double dpiY, PixelFormat pixelFormat, BitmapPalette palette)
   at System.Windows.Media.Imaging.BitmapFactory.New(Int32 pixelWidth, Int32 pixelHeight) in d:\Private\Development\WriteableBitmapEx\trunk\Source\WriteableBitmapEx\BitmapFactory.cs:line 44
   at System.Windows.Media.Imaging.WriteableBitmapExtensions.Crop(WriteableBitmap bmp, Int32 x, Int32 y, Int32 width, Int32 height) in d:\Private\Development\WriteableBitmapEx\trunk\Source\WriteableBitmapEx\WriteableBitmapTransformationExtensions.cs:line 104
   at CameraControl.windows.AstroLiveViewWnd.DrawPreviewImage(WriteableBitmap bitmap)
   at CameraControl.windows.AstroLiveViewWnd.DrawGrid(WriteableBitmap bitmap)
   at CameraControl.windows.AstroLiveViewWnd.DisplayLiveView()
   at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
   at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)

Self-timer

Multy-camera video recording

Manual focus in astro live view

Nikon - set WB in Kelvin

http://digicamcontrol.com/forum/general-discussion/custom-illumination-settings

Panorama helper in live view

Redesign Settings window

Advanced properties for Canon

Support for eyefi cards

Automatically connect to a eyefi card which is connected in same local network

Resize overlay to live view image size

Prevent Live view to be auto turn off

Restart live view if was turned of by auto standby.
http://digicamcontrol.com/forum/development/standby

Ruler in live view

Record to SDRam option isn't working on D40/D50/D60/D70/D80

Use dcraw for raw image proccesing

Preview image only after image was loaded

Hot keys are always active even if the application run in background

Cannot stop movie record for some Nikon cameras

http://digicamcontrol.com/forum/general-support/cannot-stop-movie-record

Compression settings not working

Application crash The system cannot find the file specified

at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo)
   at System.Diagnostics.Process.Start()
   at System.Diagnostics.Process.Start(ProcessStartInfo startInfo)
   at System.Diagnostics.Process.Start(String fileName)
   at CameraControl.Layouts.LayoutBase.OpenViewer(Object o) in d:\devel\vs2010\CameraControl\CameraControl\Layouts\LayoutBase.cs:line 129
   at CameraControl.Core.Classes.RelayCommand`1.Execute(Object parameter) in d:\devel\vs2010\CameraControl\CameraControl.Core\Classes\RelayCommand.cs:line 87
   at MS.Internal.Commands.CommandHelpers.CriticalExecuteCommandSource(ICommandSource commandSource, Boolean userInitiated)
   at System.Windows.Controls.MenuItem.InvokeClickAfterRender(Object arg)
   at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
   at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)

Get focus point info for Canon images

Change VirtualDub to ffmpeg for timelapse movie creation

https://trac.ffmpeg.org/wiki/Create%20a%20video%20slideshow%20from%20images

Redesign main window

Multiple cameras can be capture at same time?

Through the test, I found that 12 cameras can be capture within 6~10 seconds.
it's can be capture at same time? e.g within 1s.
thank you!

Canon cameras aren't detected when application running

http://digicamcontrol.com/forum/testingbug-reports/d100-not-picking-and-sometimes-crashing-program

Redesign Live View windows

Application crash Object reference not set to an instance of an object.

   at Microsoft.Windows.Shell.WindowChromeWorker._ExtendGlassFrame()
   at Microsoft.Windows.Shell.WindowChromeWorker._UpdateFrameState(Boolean force)
   at Microsoft.Windows.Shell.WindowChromeWorker._ApplyNewCustomChrome()
   at Microsoft.Windows.Shell.WindowChromeWorker.<_SetWindow>b__1(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Windows.Window.OnSourceInitialized(EventArgs e)
   at System.Windows.Window.CreateSourceWindow(Boolean duringShow)
   at System.Windows.Window.CreateSourceWindowDuringShow()
   at System.Windows.Window.SafeCreateWindowDuringShow()
   at System.Windows.Window.ShowHelper(Object booleanBox)
   at System.Windows.Window.Show()
   at System.Windows.Window.ShowDialog()
   at CameraControl.windows.TimeLapseWnd.button1_Click(Object sender, RoutedEventArgs e) in d:\devel\vs2010\CameraControl\CameraControl\windows\TimeLapseWnd.xaml.cs:line 106

File system watcher

Removed files outside of application isn't removed from session

Aperture bracketing

Improved camera preset managent

Simplified camera properties management (presets).
Saving in a separated file each preset
Loading same preset for all connected cameras.
Verifying if preset is loaded correctly.

Optimize interface for tablet usage

Live view preview flicker

http://digicamcontrol.com/forum/general-discussion/live-view-flicker#comment-1144

Simple image processing after capture

Rotate
Crop

Image sequencing

DigCamControl is a great program, but it missing a feature. It needs to be able to play images in a sequence as a video. I use this program sort of like a stop-motion software, and if I could play back the frames at a specified framerate, the program would be even better! :)

Printing support

Better filename template handing

A separated dialog for it

Focus Stacking not working for D7000

http://digicamcontrol.com/forum/testingbug-reports/focus-stacking-bug

Redesign Session window

I put put checkbox "Use original filename" on between backupfolder ontop of filenametemplate.

The focus area changing fail some cases in live view

Can't capture with D300 in live view or changing focus mode

bei PortableDeviceApiLib.PortableDeviceClass.SendCommand(UInt32 dwFlags, IPortableDeviceValues pParameters, IPortableDeviceValues& ppResults)
bei PortableDeviceLib.StillImageDevice.ExecuteReadData(Int32 code, IPortableDevicePropVariantCollection propVariant) in d:\devel\vs2010\CameraControl\PortableDeviceLib\StillImageDevice.cs:Zeile 694.
bei PortableDeviceLib.StillImageDevice.ExecuteReadDataEx(Int32 code, Int32 param1, Int32 param2) in d:\devel\vs2010\CameraControl\PortableDeviceLib\StillImageDevice.cs:Zeile 617.
bei CameraControl.Devices.BaseMTPCamera.ExecuteReadDataEx(Int32 code, Int32 param1, Int32 param2, Int32 loop, Int32 counter) in d:\devel\vs2010\CameraControl\CameraControl.Devices\BaseMTPCamera.cs:Zeile 364.
bei CameraControl.Devices.BaseMTPCamera.ExecuteReadDataEx(Int32 code, Int32 param1, Int32 param2) in d:\devel\vs2010\CameraControl\CameraControl.Devices\BaseMTPCamera.cs:Zeile 273.
bei CameraControl.Devices.Nikon.NikonD300.CapturePhotoNoAf() in d:\devel\vs2010\CameraControl\CameraControl.Devices\Nikon\NikonD300.cs:Zeile 63.
bei CameraControl.windows.LiveViewWnd.Capture() in d:\devel\vs2010\CameraControl\CameraControl\windows\LiveViewWnd.xaml.cs:Zeile 943.
bei CameraControl.windows.LiveViewWnd.ExecuteCommand(String cmd, Object param) in d:\devel\vs2010\CameraControl\CameraControl\windows\LiveViewWnd.xaml.cs:Zeile 1312.
bei CameraControl.windows.LiveViewManager.ExecuteCommand(String cmd, Object param) in d:\devel\vs2010\CameraControl\CameraControl\windows\LiveViewManager.cs:Zeile 135.
bei CameraControl.Core.Classes.WindowsManager.ExecuteCommand(String cmd, Object o) in d:\devel\vs2010\CameraControl\CameraControl.Core\Classes\WindowsManager.cs:Zeile 75.
bei CameraControl.windows.LiveViewWnd.button2_Click(Object sender, RoutedEventArgs e) in d:\devel\vs2010\CameraControl\CameraControl\windows\LiveViewWnd.xaml.cs:Zeile 956.