edicsonm/geeetech_g2s_pro_marlin-2.0.7.2

Marlin Configuration.h file for Geeetech G2s pro

Geeetech_G2s_pro_Marlin-2.0.7.2

Marlin firmware for Geeetech G2s pro

Commands:

echo: M666 X-0.42 Y-0.15 Z-0.17

M665 M666 Z1.6

/action:notification Calibration sd:0.189 .Height:194.09 Ex:+0.00 Ey:-1.33 Ez:-0.67 Radius:92.19 Save with M500 and/or copy to Configuration.h Error:Z-Probe failed Error:Z-Probe failed

.Height:194.20 Ex:+0.00 Ey:-0.28 Ez:-0.63 Radius:92.61 .Height:194.36 Ex:+0.00 Ey:-0.20 Ez:-0.64 Radius:92.86 .Height:194.00 Ex:+0.00 Ey:-0.76 Ez:-0.80 Radius:92.42

Probe offset X:-25.00 Y:-20.80 Z:7.00 E:0.00 Count A:15474 B:13640 C:13187 X:-23.00 Y:-18.80 Z:4.80 E:0.00 Count A:15227 B:13540 C:13150

.Height:195.80 Ex:+0.00 Ey:-0.55 Ez:-0.46 Radius:94.00 .Height:195.80 Ex:+0.00 Ey:-0.55 Ez:-0.46 Radius:94.00

M665 H195.3

.Height:194.64 Ex:+0.00 Ey:-0.64 Ez:-0.38 Radius:94.29

echo:; Endstop adjustment: echo: M666 X0.00 Y-0.55 Z-0.46 echo:; Delta settings: L R H S XYZ ABC echo: M665 L196.00 R94.00 H195.00 S160.00 X0.70 Y0.05 Z-0.74 A0.00 B0.00 C0.00

M666 X0.00 Y-0.64 Z-0.38

M665 R94.29

############# //action:notification Checking... AC .Height:195.30 Ex:+0.00 Ey:+0.00 Ez:+0.00 Radius:94.00 Iteration : 01 std dev:0.237 //action:notification Iteration : 01 Iteration : 02 std dev:0.113 //action:notification Iteration : 02 Iteration : 03 std dev:0.095 //action:notification Iteration : 03 Iteration : 04 std dev:0.066 //action:notification Iteration : 04 Iteration : 05 std dev:0.043 //action:notification Iteration : 05 Iteration : 06 std dev:0.039 //action:notification Iteration : 06 Calibration OK rolling back. //action:notification Calibration sd:0.039 .Height:194.59 Ex:+0.00 Ey:-0.65 Ez:-0.48 Radius:93.87 Save with M500 and/or copy to Configuration.h SENDING:

X-30.60 Y-21.80 Z:1.80 E:0.00 Count A:11782 B:14258 C:14535 G1 X-30.60 Y-21.80 Z2.80 F5000

X-30.60 Y-21.80

Checking... AC //action:notification Checking... AC .Height:195.30 Ex:+0.00 Ey:+0.00 Ez:+0.00 Radius:94.00 Iteration : 01 std dev:0.483 //action:notification Iteration : 01 Iteration : 02 std dev:0.156 //action:notification Iteration : 02 Iteration : 03 std dev:0.042 //action:notification Iteration : 03 Iteration : 04 std dev:0.040 //action:notification Iteration : 04 Calibration OK rolling back. //action:notification Calibration sd:0.040 .Height:195.08 Ex:+0.00 Ey:-0.74 Ez:-0.75 Radius:94.05 Save with M500 and/or copy to Configuration.h SENDING:M500

######################################################### .Height:192.10 Ex:+0.00 Ey:+0.00 Ez:+0.00 Radius:90.00 Iteration : 01 std dev:2.557 //action:notification Iteration : 01 Iteration : 02 std dev:0.994 //action:notification Iteration : 02 Iteration : 03 std dev:0.508 //action:notification Iteration : 03 Iteration : 04 std dev:0.463 //action:notification Iteration : 04 Iteration : 05 std dev:0.189 //action:notification Iteration : 05 Iteration : 06 std dev:0.159 //action:notification Iteration : 06 Iteration : 07 std dev:0.081 //action:notification Iteration : 07 Calibration OK rolling back. //action:notification Calibration sd:0.081 .Height:190.00 Ex:+0.00 Ey:-0.51 Ez:-0.62 Radius:93.91 Save with M500 and/or copy to Configuration.h

Iteration : 05 std dev:0.074 //action:notification Iteration : 05 Calibration OK rolling back. //action:notification Calibration sd:0.074 .Height:191.73 Ex:+0.00 Ey:-1.25 Ez:-0.98 Radius:94.18 Save with M500 and/or copy to Configuration.h Error:Z-Probe failed Error:Z-Probe failed

.Height:191.73 Ex:+0.00 Ey:-1.25 Ez:-0.98 Radius:94.18

Commands: M502 M500 M501 G29 P1 G29 T G29 S1 G29 F10.0 G29 A M851 Z-13.30 G28 G26 P10

SENDING:M92 echo: M92 X80.00 Y80.00 Z80.00 echo: M92 T0 E100.00 ok P15 B3

SENDING:M92 echo: M92 X80.00 Y80.00 Z80.00 echo: M92 T0 E124.53

M851 X0.00 Y0.00 Z-1.40

M851 X0.00 Y0.00 Z-9.95