eleotlecram / v-usb Goto Github PK
View Code? Open in Web Editor NEWA Firmware-Only USB implementation for Atmel's AVR Microcontrollers
License: Other
A Firmware-Only USB implementation for Atmel's AVR Microcontrollers
License: Other
This is the Readme file to Objective Development's firmware-only USB driver for Atmel AVR microcontrollers. For more information please visit http://www.obdev.at/vusb/ This directory contains the USB firmware only. Copy it as-is to your own project and add all .c and .S files to your project (these files are marked with an asterisk in the list below). Then copy usbconfig-prototype.h as usbconfig.h to your project and edit it according to your configuration. TECHNICAL DOCUMENTATION ======================= The technical documentation (API) for the firmware driver is contained in the file "usbdrv.h". Please read all of it carefully! Configuration options are documented in "usbconfig-prototype.h". The driver consists of the following files: Readme.txt ............. The file you are currently reading. Changelog.txt .......... Release notes for all versions of the driver. usbdrv.h ............... Driver interface definitions and technical docs. * usbdrv.c ............... High level language part of the driver. Link this module to your code! * usbdrvasm.S ............ Assembler part of the driver. This module is mostly a stub and includes one of the usbdrvasm*.S files depending on processor clock. Link this module to your code! usbdrvasm*.inc ......... Assembler routines for particular clock frequencies. Included by usbdrvasm.S, don't link it directly! asmcommon.inc .......... Common assembler routines. Included by usbdrvasm*.inc, don't link it directly! usbconfig-prototype.h .. Prototype for your own usbdrv.h file. * oddebug.c .............. Debug functions. Only used when DEBUG_LEVEL is defined to a value greater than 0. Link this module to your code! oddebug.h .............. Interface definitions of the debug module. usbportability.h ....... Header with compiler-dependent stuff. usbdrvasm.asm .......... Compatibility stub for IAR-C-compiler. Use this module instead of usbdrvasm.S when you assembler with IAR's tools. License.txt ............ Open Source license for this driver. CommercialLicense.txt .. Optional commercial license for this driver. USB-ID-FAQ.txt ......... General infos about USB Product- and Vendor-IDs. USB-IDs-for-free.txt ... List and terms of use for free shared PIDs. (*) ... These files should be linked to your project. CPU CORE CLOCK FREQUENCY ======================== We supply assembler modules for clock frequencies of 12 MHz, 12.8 MHz, 15 MHz, 16 MHz, 16.5 MHz 18 MHz and 20 MHz. Other clock rates are not supported. The actual clock rate must be configured in usbconfig.h. 12 MHz Clock This is the traditional clock rate of V-USB because it's the lowest clock rate where the timing constraints of the USB spec can be met. 15 MHz Clock Similar to 12 MHz, but some NOPs inserted. On the other hand, the higher clock rate allows for some loops which make the resulting code size somewhat smaller than the 12 MHz version. 16 MHz Clock This clock rate has been added for users of the Arduino board and other ready-made boards which come with a fixed 16 MHz crystal. It's also an option if you need the slightly higher clock rate for performance reasons. Since 16 MHz is not divisible by the USB low speed bit clock of 1.5 MHz, the code is somewhat tricky and has to insert a leap cycle every third byte. 12.8 MHz and 16.5 MHz Clock The assembler modules for these clock rates differ from the other modules because they have been built for an RC oscillator with only 1% precision. The receiver code inserts leap cycles to compensate for clock deviations. 1% is also the precision which can be achieved by calibrating the internal RC oscillator of the AVR. Please note that only AVRs with internal 64 MHz PLL oscillator can reach 16.5 MHz with the RC oscillator. This includes the very popular ATTiny25, ATTiny45, ATTiny85 series as well as the ATTiny26. Almost all AVRs can reach 12.8 MHz, although this is outside the specified range. See the EasyLogger example at http://www.obdev.at/vusb/easylogger.html for code which calibrates the RC oscillator based on the USB frame clock. 18 MHz Clock This module is closer to the USB specification because it performs an on the fly CRC check for incoming packets. Packets with invalid checksum are discarded as required by the spec. If you also implement checks for data PID toggling on application level (see option USB_CFG_CHECK_DATA_TOGGLING in usbconfig.h for more info), this ensures data integrity. Due to the CRC tables and alignment requirements, this code is bigger than modules for other clock rates. To activate this module, you must define USB_CFG_CHECK_CRC to 1 and USB_CFG_CLOCK_KHZ to 18000 in usbconfig.h. 20 MHz Clock This module is for people who won't do it with less than the maximum. Since 20 MHz is not divisible by the USB low speed bit clock of 1.5 MHz, the code uses similar tricks as the 16 MHz module to insert leap cycles. USB IDENTIFIERS =============== Every USB device needs a vendor- and a product-identifier (VID and PID). VIDs are obtained from usb.org for a price of 1,500 USD. Once you have a VID, you can assign PIDs at will. Since an entry level cost of 1,500 USD is too high for most small companies and hobbyists, we provide some VID/PID pairs for free. See the file USB-IDs-for-free.txt for details. Objective Development also has some license offerings which include product IDs. See http://www.obdev.at/vusb/ for details. DEVELOPMENT SYSTEM ================== This driver has been developed and optimized for the GNU compiler version 3 and 4. We recommend that you use the GNU compiler suite because it is freely available. V-USB has also been ported to the IAR compiler and assembler. It has been tested with IAR 4.10B/W32 and 4.12A/W32 on an ATmega8 with the "small" and "tiny" memory model. Not every release is tested with IAR CC and the driver may therefore fail to compile with IAR. Please note that gcc is more efficient for usbdrv.c because this module has been deliberately optimized for gcc. Gcc version 3 produces smaller code than version 4 due to new optimizing capabilities which don't always improve things on 8 bit CPUs. The code size generated by gcc 4 can be reduced with the compiler options -fno-move-loop-invariants, -fno-tree-scev-cprop and -fno-inline-small-functions in addition to -Os. On devices with more than 8k of flash memory, we also recommend the linker option --relax (written as -Wl,--relax for gcc) to convert absolute calls into relative where possible. For more information about optimizing options see: http://www.tty1.net/blog/2008-04-29-avr-gcc-optimisations_en.html These optimizations are good for gcc 4.x. Version 3.x of gcc does not support most of these options and produces good code anyway. USING V-USB FOR FREE ==================== The AVR firmware driver is published under the GNU General Public License Version 2 (GPL2) and the GNU General Public License Version 3 (GPL3). It is your choice whether you apply the terms of version 2 or version 3. If you decide for the free GPL2 or GPL3, we STRONGLY ENCOURAGE you to do the following things IN ADDITION to the obligations from the GPL: (1) Publish your entire project on a web site and drop us a note with the URL. Use the form at http://www.obdev.at/vusb/feedback.html for your submission. If you don't have a web site, you can publish the project in obdev's documentation wiki at http://www.obdev.at/goto.php?t=vusb-wiki&p=hosted-projects. (2) Adhere to minimum publication standards. Please include AT LEAST: - a circuit diagram in PDF, PNG or GIF format - full source code for the host software - a Readme.txt file in ASCII format which describes the purpose of the project and what can be found in which directories and which files - a reference to http://www.obdev.at/vusb/ (3) If you improve the driver firmware itself, please give us a free license to your modifications for our commercial license offerings. COMMERCIAL LICENSES FOR V-USB ============================= If you don't want to publish your source code under the terms of the GPL, you can simply pay money for V-USB. As an additional benefit you get USB PIDs for free, reserved exclusively to you. See the file "CommercialLicense.txt" for details.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.