[TARGET REQUEST] SPEEDYBEE_F745_AIO

[BeauBrewski]

[TARGET REQUEST] SPEEDYBEE_F745_AIO

[nerdCopter]

pretty sure this was already tested, but just in case.

EmuFlight_0.4.2_SPBE_SPEEDYBEE_F745_AIO_MPU6000_needs_testing.zip

note: bmi270 will show 8k/8k, ignore this, it is 3.2k/3.2k in hardware
note: HDZero requires dev-unstable Configurator: https://github.com/emuflight/dev-unstable/releases/tag/cfg-598

No guarantees -- Needs thorough testing and feedback.
Test gyro/accel on USB (Configurator sensors tab) first.
Test orientation.
Then test props off.
Then test-hover.
check motor temperatures, do not full-send hot motors.
please test/feedback any/all features applicable:

[Yes/No/Untested] hex Flash & subsequent USB connect
[Yes/No/Untested] Gyro
[Yes/No/Untested] Accelerometer
[Yes/No/Untested] Motors
[Yes/No/Untested] Onboard ADC
[Yes/No/Untested] OSD (analog)
[Yes/No/Untested] Smart Audio controls
[Yes/No/Untested] Beeper/Alarm switch
[Yes/No/Untested] Barometer
[Yes/No/Untested] Blackbox flash-chip/sdcard
[Yes/No/Untested] LED Strip
[Yes/No/Untested] GPS