evolvedhq/docker-cpp17-gnuarm

Docker image for embedded C++17 with GNU ARM embedded toolchain

A Docker image for Embedded C++17 CI builds

This Docker container extends 13coders/cpp17-base, located in DockerHub with tooling for ARM Cortex-M development. Please check the base image for more detailed documentation.

Features

The base image contains a complete set of C++ tooling for amd64 development, as well as extending from the official Jenkins image. Added components in this image are:

Component	Source	Version	Notes
usbutils	apt-get		Gives lsusb for debugging USB connection issues
GNU Arm Embedded	S3/binary	7-2017-q4-major	Toolchain for Cortex-M/R development

In addition, this image adds the jenkins user to the plugdev group for connection to USB hardware for deployment/flash of binaries for on-device testing or profiling - or just as a reproducible version-controlled deployment for other manual test with hardware diagnostic tools and debuggers.

It's expected that this image will in turn be extended for specific debug toolchains.

Running the CI server

Please consult the 13coders/cpp17-base documentation for a fuller description of the container launch.

We'll note here that it's also generally necessary to pass USB devices into the container launch for any embedded USB hardware that you need to interact with. It is strongly preferred to do this rather than run the container as --privileged.

On the host side, running the lsusb command would show the USB device we want to access in the container:

$ lsusb
...
Bus 001 Device 009: ID 1366:0101 XYZ PLC JTAG/SWD Debug Probe
...

The bus and device are then identified to Docker when we launch the container with the --device argument shown below (see the base image documentation for an explanation of the other command-line arguments):

$ docker run \
  -p 8080:8080 \
  -p 50000:50000 \
  -v /path/to/local/dir:/var/jenkins_home \
  --cap-add SYS_PTRACE \
  --device=/dev/bus/usb/001/009 \
  13coders/cpp17-base

It's worth noting also that Docker containers are immutable after launch, and although unplugging and re-inserting USB cables for embedded hardware on the host side might result in udev picking up the reinserted device, the container will not see it. Leave embedded test hardware plugged in throughout the container run.