fakhri-ghribi/ansible-cml

ansible-cml

Ansible Modules for CML^2

Requirements

• Ansible v2.9 or newer is required for collection support

What is Cisco Modelling Labs?

Cisco Modeling Labs is an on-premise network simulation tool that runs on workstations and servers. With Cisco Modeling Labs, you can quickly and easily simulate Cisco and non-Cisco networks, using real Cisco images. This gives you highly reliable models for designing, testing, and troubleshooting. Compared to building out real-world labs, Cisco Modeling Labs returns results faster, more easily, and for a fraction of the cost.

Installation

Directly from Ansible Galaxy

  ansible-galaxy collection install cisco.cml

via git repository

  ansible-galaxy collection install '[email protected]:CiscoDevNet/ansible-cml.git,branch'

Environmental Variables

• CML_USERNAME: Username for the CML user (used when host not specified)
• CML_PASSWORD: Password for the CML user (used when password not specified)
• CML_HOST: The CML host (used when host not specified)
• CML_LAB: The name of the lab

Inventory

To use the dynamic inventory plugin, the environmental variables must be set and a file (e.g. cml.yml) placed in the inventory specifying the plugin information:

plugin: cisco.cml.cml_inventory

The dynamic inventory script will then return information about the nodes in the lab:

ok: [hq-host1] => {
    "cml_facts": {
        "config": "#cloud-config\npassword: admin\nchpasswd: { expire: False }\nssh_pwauth: True\nhostname: hq-host1\nruncmd:\n - sudo ip address add 10.0.1.10/24 dev enp0s2\n - sudo ip link set dev enp0s2 up\n - sudo ip route add default via 10.0.1.1\n",
        "cpus": null,
        "data_volume": null,
        "image_definition": "ubuntu-18-04",
        "interfaces": [
            {
                "ipv4_addresses": [],
                "ipv6_addresses": [],
                "mac_address": "52:54:00:13:1b:fb",
                "name": "enp0s2",
                "state": "STARTED"
            }
        ],
        "node_definition": "ubuntu",
        "ram": null,
        "state": "BOOTED"
    }
}

Collection Playbooks

cisco.cml.build

• Build a topology

extra_vars:

• startup: Either all to start up all devices at one or host to startup devices individually (default: all)
• wait: Whether to wait for the task to complete before returning (default: no)

notes:

• cml_lab_file lab file must be defined and will be read in as a J2 template.
• When cml_config_file is specified per host and -e startup='host' is specified, the file is read in as a J2 template and fed into the device at startup.

cisco.cml.clean

• Clean a topology

tags:

• stop: Just stop the topology
• wipe: Stop and wipe the topology
• erase: Stop, wipe, and erase the topology

cisco.cml.inventory

• Show topology Inventory

Example Playbooks

Create a Lab

- name: Create the lab
  cisco.cml.cml_lab:
    host: "{{ cml_host }}"
    user: "{{ cml_username }}"
    password: "{{ cml_password }}"
    lab: "{{ cml_lab }}"
    state: present
    file: "{{ cml_lab_file }}"
  register: results

Start a Node

- name: Start Node
  cisco.cml.cml_node:
    name: "{{ inventory_hostname }}"
    host: "{{ cml_host }}"
    user: "{{ cml_username }}"
    password: "{{ cml_password }}"
    lab: "{{ cml_lab }}"
    state: started
    image_definition: "{{ cml_image_definition | default(omit) }}"
    config: "{{ day0_config | default(omit) }}"

Collect facts about the Lab

- name: Collect Facts
  cisco.cml.cml_lab_facts:
    host: "{{ cml_host }}"
    user: "{{ cml_username }}"
    password: "{{ cml_password }}"
    lab: "{{ cml_lab }}"
  register: result

License

GPLv3