falkor/dotfiles

Personal configuration files for bash, zsh, git, vim, screen etc.

dotfiles's Issues

I do not see the icons for Apple or Home...

What else does it need (Mac) I follow the steps.I cannot see the icon for the Apple logo or the Home as my home dir.

[ERROR] Unable to find the dotfile '/home/ubuntu//.config/bash/.bashrc'

My OS is Ubuntu(18.04.6 LTS) therefore I used your instructions as follows :

git clone https://github.com/Falkor/dotfiles.git ~/.dotfiles.falkor.d

Once cloned, initiated my local copy of the repository by running:

cd ~/.dotfiles.falkor.d
make setup
make install

I then received this error message :

[ERROR] Unable to find the dotfile '/home/ubuntu//.config/bash/.bashrc'
(interpreted path: ''). 'install.sh -h' for help.
.Makefile.after:17: recipe for target 'install' failed
make: *** [install] Error 1```

Dead Font

Font links are all dead

Error: Invalid Brewfile: undefined method `mac' for #<Bundle::Dsl:0x00007ff824a8d490>

Hello! I was following the direction in the ReadMe and got to the point of:

 brew bundle --file=/tmp/Brewfile -v

And got this error code:

 Error: Invalid Brewfile: undefined method `mac' for #<Bundle::Dsl:0x00007ff824a8d490>

Everything else beforehand looked like it ran successfully:

brew tap Homebrew/bundle
Updating Homebrew...
==> Auto-updated Homebrew!
Updated 2 taps (homebrew/core and homebrew/cask).
==> New Formulae
crispy-doom [email protected] projectm rdkit
==> Updated Formulae
Updated 497 formulae.
==> Deleted Formulae
avian geant4
==> New Casks
cog nault wannianli
font-smoothing-adjuster redream zecwallet-lite
kyokan-bob rhino zulufx
megax the-archive
==> Updated Casks
Updated 173 casks.
==> Deleted Casks
kode54-cog protonmail-unofficial
mega rhinoceros

==> Tapping homebrew/bundle
Cloning into '/usr/local/Homebrew/Library/Taps/homebrew/homebrew-bundle'...
remote: Enumerating objects: 4, done.
remote: Counting objects: 100% (4/4), done.
remote: Compressing objects: 100% (4/4), done.
remote: Total 5839 (delta 0), reused 0 (delta 0), pack-reused 5835
Receiving objects: 100% (5839/5839), 1.33 MiB | 8.72 MiB/s, done.
Resolving deltas: 100% (3423/3423), done.
Tapped 1 command (109 files, 1.7MB).
➜ ~ curl -o /tmp/Brewfile https://raw.githubusercontent.com/Falkor/dotfiles/master/brew/Brewfile.minimal
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 1014 100 1014 0 0 5393 0 --:--:-- --:--:-- --:--:-- 5393

I am on a Mac:

I am doing this in preparation to installing Powerlevel10k following the directions here:

 https://medium.com/weekly-webtips/my-terminal-setu-iterm2-zsh-powerlevel10k-f7101ffc72c2

Thank you for your help!

Sincerely,

Karl.

how to show git icon and battery ?on zsh

Wont download

The font wont download... getting a 403 bad request

Installing the "Bundle"

So, below, it did not run because I had not gone to the App Store and downloaded Xcode from there (though I already had the command line ones installed, apparently).

After that, and restarting the shell, I issued it again and (good news):

 Homebrew Bundle complete! 34 Brewfile dependencies now installed.

\\\\\\\\\\

I re-ran the commands and got this far:

Installing sublime-text
Installing Xcode app. It is not currently installed.
No downloads
Error: No downloads began
Installing Xcode has failed!
Installing font-source-code-pro-for-powerline cask. It is not currently installed.
==> Cloning https://github.com/powerline/fonts/trunk/SourceCodePro
Warning: No checksum defined for cask 'font-source-code-pro-for-powerline', skipping verification.
==> Installing Cask font-source-code-pro-for-powerline
==> Moving Font 'Source Code Pro for Powerline.otf' to '/Users/karldschubert/Library/Fonts/Source Code Pro for Powerline.otf'
==> Moving Font 'Source Code Pro Bold for Powerline.otf' to '/Users/karldschubert/Library/Fonts/Source Code Pro Bold for Powerline.otf'
==> Moving Font 'Source Code Pro ExtraLight for Powerline.otf' to '/Users/karldschubert/Library/Fonts/Source Code Pro ExtraLight for Powerline.otf'
==> Moving Font 'Source Code Pro Light for Powerline.otf' to '/Users/karldschubert/Library/Fonts/Source Code Pro Light for Powerline.otf'
==> Moving Font 'Source Code Pro Medium for Powerline.otf' to '/Users/karldschubert/Library/Fonts/Source Code Pro Medium for Powerline.otf'
==> Moving Font 'Source Code Pro Powerline BlackItalic.otf' to '/Users/karldschubert/Library/Fonts/Source Code Pro Powerline BlackItalic.otf'
==> Moving Font 'Source Code Pro Powerline BoldItalic.otf' to '/Users/karldschubert/Library/Fonts/Source Code Pro Powerline BoldItalic.otf'
==> Moving Font 'Source Code Pro Powerline ExtraLightItalic.otf' to '/Users/karldschubert/Library/Fonts/Source Code Pro Powerline ExtraLightItalic.otf'
==> Moving Font 'Source Code Pro Powerline Italic.otf' to '/Users/karldschubert/Library/Fonts/Source Code Pro Powerline Italic.otf'
==> Moving Font 'Source Code Pro Powerline LightItalic.otf' to '/Users/karldschubert/Library/Fonts/Source Code Pro Powerline LightItalic.otf'
==> Moving Font 'Source Code Pro Powerline MediumItalic.otf' to '/Users/karldschubert/Library/Fonts/Source Code Pro Powerline MediumItalic.otf'
==> Moving Font 'Source Code Pro Powerline SemiboldItalic.otf' to '/Users/karldschubert/Library/Fonts/Source Code Pro Powerline SemiboldItalic.otf'
==> Moving Font 'Source Code Pro Semibold for Powerline.otf' to '/Users/karldschubert/Library/Fonts/Source Code Pro Semibold for Powerline.otf'
==> Moving Font 'Source Code Pro Black for Powerline.otf' to '/Users/karldschubert/Library/Fonts/Source Code Pro Black for Powerline.otf'
🍺 font-source-code-pro-for-powerline was successfully installed!
Installing font-source-code-pro-for-powerline
Using font-hack-nerd-font
Homebrew Bundle failed! 1 Brewfile dependency failed to install.

/users/xyz/.oh-my-zsh/themes master* 11m 23s

I looked back and this appears to be the problem:

I re-ran and got to here:

❯ brew bundle --file=/tmp/Brewfile -v
Updating Homebrew...
==> Auto-updated Homebrew!
Updated 2 taps (homebrew/core and homebrew/cask).
==> Updated Formulae
Updated 8 formulae.
==> Updated Casks
Updated 2 casks.

Skipping install of buo/cask-upgrade tap. It is already installed.
Using buo/cask-upgrade
Skipping install of d12frosted/emacs-plus tap. It is already installed.
Using d12frosted/emacs-plus
Skipping install of homebrew/bundle tap. It is already installed.
Using homebrew/bundle
Skipping install of homebrew/cask tap. It is already installed.
Using homebrew/cask
Skipping install of homebrew/cask-fonts tap. It is already installed.
Using homebrew/cask-fonts
Skipping install of homebrew/cask-versions tap. It is already installed.
Using homebrew/cask-versions
Skipping install of homebrew/core tap. It is already installed.
Using homebrew/core
Skipping install of homebrew/services tap. It is already installed.
Using homebrew/services
Skipping install of romkatv/powerlevel10k tap. It is already installed.
Using romkatv/powerlevel10k
Skipping install of readline formula. It is already up-to-date.
Using readline
Skipping install of bash formula. It is already up-to-date.
Using bash
Skipping install of bash-completion formula. It is already up-to-date.
Using bash-completion
Skipping install of coreutils formula. It is already up-to-date.
Using coreutils
Skipping install of curl formula. It is already up-to-date.
Using curl
Skipping install of git formula. It is already up-to-date.
Using git
Skipping install of git-extras formula. It is already up-to-date.
Using git-extras
Skipping install of git-flow-avh formula. It is already up-to-date.
Using git-flow-avh
Skipping install of mas formula. It is already up-to-date.
Using mas
Skipping install of powerlevel10k formula. It is already up-to-date.
Using romkatv/powerlevel10k/powerlevel10k
Skipping install of subversion formula. It is already up-to-date.
Using subversion
Skipping install of terminal-notifier formula. It is already up-to-date.
Using terminal-notifier
Skipping install of tig formula. It is already up-to-date.
Using tig
Skipping install of vim formula. It is already up-to-date.
Using vim
Skipping install of wget formula. It is already up-to-date.
Using wget
Skipping install of bash-completion formula. It is already up-to-date.
Using bash-completion
Skipping install of brew-cask-completion formula. It is already up-to-date.
Using brew-cask-completion
Skipping install of zsh-completions formula. It is already up-to-date.
Using zsh-completions
Using atom
Skipping install of emacs-plus@27 formula. It is already up-to-date.
Using d12frosted/emacs-plus/emacs-plus@27
Using iterm2
Using sublime-text
Installing Xcode app. It is not currently installed.
^C

/users/xyz/.oh-my-zsh/themes master* 1m 37s

Thank you, again, for your help!

How can I delete rvm status when unecessary?

Hi, I see your screenshot, it seems that since you run 'rvm use 2.1' then it shows rvm status on the right prompt, befor that it don't have that. How can you do that? I use rvm and powerlevel9k too, but I have rvm status on my right prompt all the time, how can I delete it when unnecessary?

CHanging Theme to dark

Hi there, other than the documentation is there another way for me to study your dotfiles? I really like the way it is structured but I can't seem to wrap my head around it. Some help regarding modifying vim theme would very helpful. I tried changing the theme from light to dark but it still remained light. if you could can you please email me the explanation at [email protected]? Thanks in advance