fangzhuang2004/wrtnode2r_stm32

source code of stm32 on wrtnode2r

In the ununtu 14.04 x86_64

There is an example in the linux.In the windows you can see the rt-thread's document.

Install arm cross-compiler.

Install python and scons

sudo apt-get install python scons

Install gcc-arm-none-eabi

sudo add-apt-repository ppa:terry.guo/gcc-arm-embedded

sudo apt-get update

sudo apt-get install gcc-arm-none-eabi

Download the rt-thread and WRTnode-stm32 in the same directory

[email protected]:RT-Thread/rt-thread.git

git clone [email protected]:WRTnode/wrtnode2r_stm32.git\

Configure the WRTnode-stm32

• Open the wrtnode2r_stm32/rtconfig.py , change the
  '/Users/schumy/gcc-arm-none-eabi/bin'
  as "/usr/bin" in the line 16.
• Open the wrtnode2r_stm32/SConstruct ,
  change "/../rtt" as "/../rt-thread" in the line 8.

Compile and Clean

complie

scons -j 4

clean

scons --clean

Work in MDK5

Install software

Install python2.7 scons and set PATH in Windows

Make MDK5 project

Open CMD window.

Set RTT_ROOT path in CMD window by using set RTT_ROOT=xxxx

Run scons. scons --target=mdk5 -s

After that, you can open project.uvprojx and start coding.