Plymouthが正常に表示されない

[fascodenet]

Plymouthが正常に表示されない

[stu2005]

私のPCでplymouthが映ったので方法のご紹介。やるのは自己責任で。
https://wiki.archlinux.jp/index.php/Plymouth#.E3.83.86.E3.83.BC.E3.83.9E.E3.81.AE.E5.A4.89.E6.9B.B4
に書いてあることをそのままやっただけなんですが、
/etc/plymouth/plymouthd.conf の DeviceTimeoutの項目を15に設定することで解決しました。この値はもっと少なくてもいいかもしれません。

sed -i -e 's/8/15/g' /etc/plymouth/plymouthd.conf
plymouth-set-default-theme -R alter-logo (念のため)

[Hayao0819]

一部の環境で一切表示されない問題は 85bfae7 で多少は修正されたかもしれません

[stu2005]

やっぱり駄目でした。最初の10数回は上手くいったのですがそれ以来は映りません。ただ、TEXTモードではなく何も映りません。

[Hayao0819]

alter-stableリポジトリのplymouthパッケージを最新のものに更新しました
以下の手順でコマンドを実行してどうなるた確かめてみて下さい

yay -Syy
yay -Syu plymouth

[watasuke102]

コマンド実行してみましたが、変化はありませんでした・・・。
電源ボタン長押しでの強制終了をもう一度試してみましたが、正常に表示されませんでした。

[Hayao0819]

Plymouthのバージョンを教えて下さい

yay -Q plymouth

[watasuke102]

plymouth 0.9.4-7　です

[Hayao0819]

おそらくPlymouthのバグです。
数回そのように起動できない状態を確認しております。
これらがわの問題ではなくアップストリームの問題と思われます。

[watasuke102]

以下の環境で正常に表示されました。

• Alter Linux Lxde (Beta1)
• DynaBook t451/46DBS
• Core i5-2430M
• SDカードリーダーに刺したSDカードから起動
• plymouth 0.9.4-7
• systend 244 (244.3-1-arch)

[Hayao0819]

ちょっと危険かもしれないですが、systemdを最新にしてみて下さい

yay -S core/systemd-sysvcompat core/systemd-libs core/systemd multilib/lib32-systemd

[watasuke102]

最新にしてみましたが、表示されませんでした・・・
systemd 245 (245.5-2-arch)

[kahenteikou]

KMSかframebufferが有効になっておらず、TEXTモードでplymouthが起動するのが原因と思われます。

[kahenteikou]

NVIDIAのドライバ入れても発生し、KMS有効でも治りません。

[kahenteikou]

ログです。

[main.c:1928]                                 check_logging:checking if console messages should be redirected and logged
[main.c:1937]                                 check_logging:logging will be enabled!
[main.c:2006]                        initialize_environment:source built on Aug  8 2020
[main.c:2016]                        initialize_environment:Making sure /var/run/plymouth exists
[main.c:2020]                        initialize_environment:initialized minimal work environment
[main.c:1784]                     attach_to_running_session:creating new terminal session
[ply-terminal-session.c:362]                   ply_terminal_session_attach:ptmx not passed in, creating one
[ply-terminal-session.c:236]                           open_pseudoterminal:opening device '/dev/ptmx'
[ply-terminal-session.c:242]                           open_pseudoterminal: opened device '/dev/ptmx'
[ply-terminal-session.c:244]                           open_pseudoterminal:creating pseudoterminal
[ply-terminal-session.c:252]                           open_pseudoterminal:done creating pseudoterminal
[ply-terminal-session.c:254]                           open_pseudoterminal:unlocking pseudoterminal
[ply-terminal-session.c:261]                           open_pseudoterminal:unlocked pseudoterminal
[ply-terminal-session.c:372]                   ply_terminal_session_attach:redirecting system console to terminal device
[ply-terminal-session.c:381]                   ply_terminal_session_attach:done redirecting system console to terminal device
[ply-terminal-session.c:511]            ply_terminal_session_start_logging:logging incoming console messages
[main.c:1660]                 tell_systemd_to_print_details:telling systemd to start printing details
[main.c:712]                       get_cache_file_for_mode:returning cache file '/var/lib/plymouth//boot-duration'
[main.c:295]                                 load_settings:Trying to load /etc/plymouth//plymouthd.conf
[ply-key-file.c:171]                       ply_key_file_load_group:trying to load group Daemon
[ply-key-file.c:258]                      ply_key_file_load_groups:key file has no more groups
[main.c:309]                                 load_settings:Checking if /var/run/plymouth/themes/alter-logo/alter-logo.plymouth exists
[main.c:311]                                 load_settings:/var/run/plymouth/themes/alter-logo/alter-logo.plymouth not found, fallbacking to /usr/share/plymouth/themes/
[main.c:325]                                 load_settings:Splash delay is set to 15.000000
[main.c:337]                                 load_settings:Device timeout is set to 10.000000
[ply-key-file.c:352]                        ply_key_file_get_value:key file does not have entry for key 'DeviceScale'
[main.c:446]                    find_system_default_splash:System configured theme file is '/usr/share/plymouth/themes/alter-logo/alter-logo.plymouth'
[main.c:295]                                 load_settings:Trying to load /var/run/plymouth/plymouthd.defaults
[ply-key-file.c:82]                        ply_key_file_open_file:Failed to open key file /var/run/plymouth/plymouthd.defaults: No such file or directory
[main.c:456]              find_distribution_default_splash:failed to load /var/run/plymouth/plymouthd.defaults, trying /usr/share/plymouth//
[main.c:295]                                 load_settings:Trying to load /usr/share/plymouth//plymouthd.defaults
[ply-key-file.c:171]                       ply_key_file_load_group:trying to load group Daemon
[ply-key-file.c:258]                      ply_key_file_load_groups:key file has no more groups
[main.c:309]                                 load_settings:Checking if /var/run/plymouth/themes/alter-logo/alter-logo.plymouth exists
[main.c:311]                                 load_settings:/var/run/plymouth/themes/alter-logo/alter-logo.plymouth not found, fallbacking to /usr/share/plymouth/themes/
[ply-key-file.c:352]                        ply_key_file_get_value:key file does not have entry for key 'DeviceScale'
[main.c:463]              find_distribution_default_splash:Distribution default theme file is '/usr/share/plymouth/themes/alter-logo/alter-logo.plymouth'
[main.c:873]           plymouth_should_show_default_splash:checking if plymouth should show default splash
[main.c:901]           plymouth_should_show_default_splash:using default splash because kernel command line has option "splash"
[ply-device-manager.c:785]                 create_devices_from_terminals:checking for consoles
[ply-device-manager.c:563]                        add_consoles_from_file:opening /sys/class/tty/console/active
[ply-device-manager.c:571]                        add_consoles_from_file:reading file
[ply-device-manager.c:609]                        add_consoles_from_file:console /dev/tty1 found!
[ply-device-manager.c:385]                         watch_for_udev_events:watching for udev graphics device add and remove events
[ply-device-manager.c:283]                  create_devices_for_subsystem:creating objects for drm devices
[ply-device-manager.c:303]                  create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ply-device-manager.c:310]                  create_devices_for_subsystem:device is initialized
[ply-device-manager.c:319]                  create_devices_for_subsystem:found node /dev/dri/card0
[ply-device-manager.c:233]                create_devices_for_udev_device:device subsystem is drm
[ply-device-manager.c:236]                create_devices_for_udev_device:found DRM device /dev/dri/card0
[ply-device-manager.c:697] create_devices_for_terminal_and_renderer_type:creating devices for /dev/dri/card0 (renderer type: 1) (terminal: /dev/tty1)
[ply-renderer.c:236]                      ply_renderer_open_plugin:trying to open renderer plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:799]                                create_backend:creating renderer backend for device /dev/dri/card0
[./plugin.c:178]                     should_use_preferred_mode:should_use_preferred_mode: 1
[./plugin.c:892]                                   load_driver:Opening '/dev/dri/card0'
[ply-terminal.c:603]                             ply_terminal_open:trying to open terminal '/dev/tty1'
[ply-terminal.c:396]                 ply_terminal_refresh_geometry:looking up terminal text geometry
[ply-terminal.c:408]                 ply_terminal_refresh_geometry:terminal is now 200x56 text cells
[ply-terminal.c:446]                                 get_active_vt:Remembering that initial vt is 1
[./plugin.c:1239]                                  query_device:Could not initialize heads
[ply-renderer.c:249]                      ply_renderer_open_plugin:could not query rendering device for plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:959]                                  close_device:closing device
[./plugin.c:913]                                unload_backend:unloading backend
[./plugin.c:824]                               destroy_backend:destroying renderer backend for device /dev/dri/card0
[ply-renderer.c:287]                             ply_renderer_open:could not find suitable rendering plugin
[ply-device-manager.c:705] create_devices_for_terminal_and_renderer_type:could not open renderer for /dev/dri/card0
[ply-device-manager.c:303]                  create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-DP-1
[ply-device-manager.c:310]                  create_devices_for_subsystem:device is initialized
[ply-device-manager.c:303]                  create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-DVI-D-1
[ply-device-manager.c:310]                  create_devices_for_subsystem:device is initialized
[ply-device-manager.c:303]                  create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-HDMI-A-1
[ply-device-manager.c:310]                  create_devices_for_subsystem:device is initialized
[ply-device-manager.c:303]                  create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/renderD128
[ply-device-manager.c:310]                  create_devices_for_subsystem:device is initialized
[ply-device-manager.c:323]                  create_devices_for_subsystem:device doesn't have a devices tag
[main.c:2310]                                          main:entering event loop
[ply-device-manager.c:349]                                 on_udev_event:got add event for device card0
[ply-device-manager.c:233]                create_devices_for_udev_device:device subsystem is drm
[ply-device-manager.c:236]                create_devices_for_udev_device:found DRM device /dev/dri/card0
[ply-device-manager.c:697] create_devices_for_terminal_and_renderer_type:creating devices for /dev/dri/card0 (renderer type: 1) (terminal: /dev/tty1)
[ply-renderer.c:236]                      ply_renderer_open_plugin:trying to open renderer plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:799]                                create_backend:creating renderer backend for device /dev/dri/card0
[./plugin.c:178]                     should_use_preferred_mode:should_use_preferred_mode: 1
[./plugin.c:892]                                   load_driver:Opening '/dev/dri/card0'
[ply-terminal.c:599]                             ply_terminal_open:terminal /dev/tty1 is already open
[./plugin.c:1239]                                  query_device:Could not initialize heads
[ply-renderer.c:249]                      ply_renderer_open_plugin:could not query rendering device for plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:959]                                  close_device:closing device
[./plugin.c:913]                                unload_backend:unloading backend
[./plugin.c:824]                               destroy_backend:destroying renderer backend for device /dev/dri/card0
[ply-renderer.c:287]                             ply_renderer_open:could not find suitable rendering plugin
[ply-device-manager.c:705] create_devices_for_terminal_and_renderer_type:could not open renderer for /dev/dri/card0
[ply-device-manager.c:349]                                 on_udev_event:got add event for device card0-DP-1
[ply-device-manager.c:349]                                 on_udev_event:got add event for device card0-DVI-D-1
[ply-device-manager.c:349]                                 on_udev_event:got add event for device card0-HDMI-A-1
[ply-device-manager.c:349]                                 on_udev_event:got add event for device fb0
[ply-device-manager.c:365]                                 on_udev_event:ignoring since we only handle subsystem graphics devices after timeout
[ply-boot-server.c:350]             print_connection_process_identity:connection is from pid 239 (/usr/bin/plymouth --show-splash) with parent pid 1 (/usr/bin/ash /init splash)
[ply-boot-server.c:449]                ply_boot_connection_on_request:got show splash request
[main.c:843]      plymouth_should_ignore_show_splash_calls:checking if plymouth should be running
[main.c:945]                                on_show_splash:no displays available to show splash on, waiting...
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:350]             print_connection_process_identity:connection is from pid 253 (/usr/bin/plymouth update-root-fs --new-root-dir=/new_root) with parent pid 1 (/usr/bin/ash /init splash)
[ply-boot-server.c:660]                ply_boot_connection_on_request:got newroot request
[main.c:682]                                    on_newroot:new root mounted at "/new_root", switching to it
[main.c:712]                       get_cache_file_for_mode:returning cache file '/var/lib/plymouth//boot-duration'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to '-.mount'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'dev-hugepages.mount'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'dev-mqueue.mount'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'sys-kernel-debug.mount'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 12
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'sys-kernel-tracing.mount'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'kmod-static-nodes.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'proc-sys-fs-binfmt_misc.mount'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 12
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'systemd-remount-fs.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'systemd-binfmt.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'systemd-udev-trigger.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'systemd-journald.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'systemd-random-seed.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'systemd-journal-flush.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'systemd-modules-load.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'sys-kernel-config.mount'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'systemd-tmpfiles-setup-dev.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'systemd-sysctl.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'systemd-vconsole-setup.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'systemd-udevd.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'lvm2-lvmetad.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:350]             print_connection_process_identity:connection is from pid 345 (/usr/bin/plymouth show-splash) with parent pid 1 (/sbin/init splash)
[ply-boot-server.c:449]                ply_boot_connection_on_request:got show splash request
[main.c:920]                                on_show_splash:show splash called while already shown
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'plymouth-start.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-device-manager.c:349]                                 on_udev_event:got add event for device fb0
[ply-device-manager.c:365]                                 on_udev_event:ignoring since we only handle subsystem graphics devices after timeout
[ply-device-manager.c:349]                                 on_udev_event:got add event for device card0
[ply-device-manager.c:233]                create_devices_for_udev_device:device subsystem is drm
[ply-device-manager.c:236]                create_devices_for_udev_device:found DRM device /dev/dri/card0
[ply-device-manager.c:697] create_devices_for_terminal_and_renderer_type:creating devices for /dev/dri/card0 (renderer type: 1) (terminal: /dev/tty1)
[ply-renderer.c:236]                      ply_renderer_open_plugin:trying to open renderer plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:799]                                create_backend:creating renderer backend for device /dev/dri/card0
[./plugin.c:178]                     should_use_preferred_mode:should_use_preferred_mode: 1
[./plugin.c:892]                                   load_driver:Opening '/dev/dri/card0'
[ply-terminal.c:599]                             ply_terminal_open:terminal /dev/tty1 is already open
[./plugin.c:1239]                                  query_device:Could not initialize heads
[ply-renderer.c:249]                      ply_renderer_open_plugin:could not query rendering device for plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:959]                                  close_device:closing device
[./plugin.c:913]                                unload_backend:unloading backend
[./plugin.c:824]                               destroy_backend:destroying renderer backend for device /dev/dri/card0
[ply-renderer.c:287]                             ply_renderer_open:could not find suitable rendering plugin
[ply-device-manager.c:705] create_devices_for_terminal_and_renderer_type:could not open renderer for /dev/dri/card0
[ply-device-manager.c:349]                                 on_udev_event:got add event for device card0-DVI-D-1
[ply-device-manager.c:349]                                 on_udev_event:got add event for device card0-DP-1
[ply-device-manager.c:349]                                 on_udev_event:got add event for device card0-HDMI-A-1
[ply-device-manager.c:349]                                 on_udev_event:got add event for device card1
[ply-device-manager.c:233]                create_devices_for_udev_device:device subsystem is drm
[ply-device-manager.c:236]                create_devices_for_udev_device:found DRM device /dev/dri/card1
[ply-device-manager.c:697] create_devices_for_terminal_and_renderer_type:creating devices for /dev/dri/card1 (renderer type: 1) (terminal: /dev/tty1)
[ply-renderer.c:236]                      ply_renderer_open_plugin:trying to open renderer plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:799]                                create_backend:creating renderer backend for device /dev/dri/card1
[./plugin.c:178]                     should_use_preferred_mode:should_use_preferred_mode: 1
[./plugin.c:892]                                   load_driver:Opening '/dev/dri/card1'
[ply-terminal.c:599]                             ply_terminal_open:terminal /dev/tty1 is already open
[./plugin.c:1239]                                  query_device:Could not initialize heads
[ply-renderer.c:249]                      ply_renderer_open_plugin:could not query rendering device for plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:959]                                  close_device:closing device
[./plugin.c:913]                                unload_backend:unloading backend
[./plugin.c:824]                               destroy_backend:destroying renderer backend for device /dev/dri/card1
[ply-renderer.c:287]                             ply_renderer_open:could not find suitable rendering plugin
[ply-device-manager.c:705] create_devices_for_terminal_and_renderer_type:could not open renderer for /dev/dri/card1
[ply-device-manager.c:349]                                 on_udev_event:got add event for device card1-VGA-1
[ply-device-manager.c:349]                                 on_udev_event:got change event for device card1
[ply-device-manager.c:349]                                 on_udev_event:got add event for device card1-HDMI-A-2
[ply-device-manager.c:349]                                 on_udev_event:got change event for device card1
[ply-device-manager.c:349]                                 on_udev_event:got add event for device card1-DP-2
[ply-device-manager.c:349]                                 on_udev_event:got change event for device card1
[ply-device-manager.c:349]                                 on_udev_event:got change event for device card1
[ply-device-manager.c:349]                                 on_udev_event:got change event for device card1
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'dev-disk-by\x2dlabel-SWAP.swap'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'dev-disk-by\x2dpath-pci\x2d0000:00:1f.2\x2data\x2d1\x2dpart13.swap'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 12
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'dev-disk-by\x2dpartuuid-e5e94f90\x2d1469\x2d4976\x2d910e\x2d7a367c259b24.swap'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'dev-disk-by\x2did-ata\x2dWDC_WD40EZRZ\x2d00GXCB0_WD\x2dWCC7K3KJRKHK\x2dpart13.swap'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'dev-disk-by\x2did-wwn\x2d0x50014ee265fa3ed7\x2dpart13.swap'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 12
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'dev-disk-by\x2duuid-4d048e93\x2d7d2e\x2d4a0a\x2d8404\x2d0b426c03372b.swap'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'dev-disk-by\x2dpartlabel-SWAP.swap'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'dev-disk-by\x2dpath-pci\x2d0000:00:1f.2\x2data\x2d1.0\x2dpart13.swap'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 12
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'dev-sda13.swap'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'tmp.mount'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'lvm2-monitor.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'var-lib-snapd-snap-core-9804.mount'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'var-lib-snapd-snap-gravit\x2ddesigner-42.mount'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'systemd-fsck@dev-disk-by\x2duuid-329C\x2dEAD6.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 10
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 10
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 10 from epoll watch list: Bad file descriptor
[ply-device-manager.c:830]                      create_devices_from_udev:Timeout elapsed, looking for devices from udev
[ply-device-manager.c:283]                  create_devices_for_subsystem:creating objects for drm devices
[ply-device-manager.c:303]                  create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ply-device-manager.c:310]                  create_devices_for_subsystem:device is initialized
[ply-device-manager.c:319]                  create_devices_for_subsystem:found node /dev/dri/card0
[ply-device-manager.c:233]                create_devices_for_udev_device:device subsystem is drm
[ply-device-manager.c:236]                create_devices_for_udev_device:found DRM device /dev/dri/card0
[ply-device-manager.c:697] create_devices_for_terminal_and_renderer_type:creating devices for /dev/dri/card0 (renderer type: 1) (terminal: /dev/tty1)
[ply-renderer.c:236]                      ply_renderer_open_plugin:trying to open renderer plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:799]                                create_backend:creating renderer backend for device /dev/dri/card0
[./plugin.c:178]                     should_use_preferred_mode:should_use_preferred_mode: 1
[./plugin.c:892]                                   load_driver:Opening '/dev/dri/card0'
[ply-terminal.c:599]                             ply_terminal_open:terminal /dev/tty1 is already open
[./plugin.c:1239]                                  query_device:Could not initialize heads
[ply-renderer.c:249]                      ply_renderer_open_plugin:could not query rendering device for plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:959]                                  close_device:closing device
[./plugin.c:913]                                unload_backend:unloading backend
[./plugin.c:824]                               destroy_backend:destroying renderer backend for device /dev/dri/card0
[ply-renderer.c:287]                             ply_renderer_open:could not find suitable rendering plugin
[ply-device-manager.c:705] create_devices_for_terminal_and_renderer_type:could not open renderer for /dev/dri/card0
[ply-device-manager.c:303]                  create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-DP-1
[ply-device-manager.c:310]                  create_devices_for_subsystem:device is initialized
[ply-device-manager.c:303]                  create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-DVI-D-1
[ply-device-manager.c:310]                  create_devices_for_subsystem:device is initialized
[ply-device-manager.c:303]                  create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0/card0-HDMI-A-1
[ply-device-manager.c:310]                  create_devices_for_subsystem:device is initialized
[ply-device-manager.c:303]                  create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/renderD128
[ply-device-manager.c:310]                  create_devices_for_subsystem:device is initialized
[ply-device-manager.c:323]                  create_devices_for_subsystem:device doesn't have a devices tag
[ply-device-manager.c:303]                  create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ply-device-manager.c:310]                  create_devices_for_subsystem:device is initialized
[ply-device-manager.c:319]                  create_devices_for_subsystem:found node /dev/dri/card1
[ply-device-manager.c:233]                create_devices_for_udev_device:device subsystem is drm
[ply-device-manager.c:236]                create_devices_for_udev_device:found DRM device /dev/dri/card1
[ply-device-manager.c:697] create_devices_for_terminal_and_renderer_type:creating devices for /dev/dri/card1 (renderer type: 1) (terminal: /dev/tty1)
[ply-renderer.c:236]                      ply_renderer_open_plugin:trying to open renderer plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:799]                                create_backend:creating renderer backend for device /dev/dri/card1
[./plugin.c:178]                     should_use_preferred_mode:should_use_preferred_mode: 1
[./plugin.c:892]                                   load_driver:Opening '/dev/dri/card1'
[ply-terminal.c:599]                             ply_terminal_open:terminal /dev/tty1 is already open
[./plugin.c:1239]                                  query_device:Could not initialize heads
[ply-renderer.c:249]                      ply_renderer_open_plugin:could not query rendering device for plugin /usr/lib/plymouth/renderers/drm.so
[./plugin.c:959]                                  close_device:closing device
[./plugin.c:913]                                unload_backend:unloading backend
[./plugin.c:824]                               destroy_backend:destroying renderer backend for device /dev/dri/card1
[ply-renderer.c:287]                             ply_renderer_open:could not find suitable rendering plugin
[ply-device-manager.c:705] create_devices_for_terminal_and_renderer_type:could not open renderer for /dev/dri/card1
[ply-device-manager.c:303]                  create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:02.0/drm/card1/card1-DP-2
[ply-device-manager.c:310]                  create_devices_for_subsystem:device is initialized
[ply-device-manager.c:303]                  create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:02.0/drm/card1/card1-HDMI-A-2
[ply-device-manager.c:310]                  create_devices_for_subsystem:device is initialized
[ply-device-manager.c:303]                  create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:02.0/drm/card1/card1-VGA-1
[ply-device-manager.c:310]                  create_devices_for_subsystem:device is initialized
[ply-device-manager.c:303]                  create_devices_for_subsystem:found device /sys/devices/pci0000:00/0000:00:02.0/drm/renderD129
[ply-device-manager.c:310]                  create_devices_for_subsystem:device is initialized
[ply-device-manager.c:323]                  create_devices_for_subsystem:device doesn't have a devices tag
[ply-device-manager.c:283]                  create_devices_for_subsystem:creating objects for frame buffer devices
[ply-device-manager.c:303]                  create_devices_for_subsystem:found device /sys/devices/platform/efi-framebuffer.0/graphics/fb0
[ply-device-manager.c:310]                  create_devices_for_subsystem:device is initialized
[ply-device-manager.c:319]                  create_devices_for_subsystem:found node /dev/fb0
[ply-device-manager.c:233]                create_devices_for_udev_device:device subsystem is graphics
[ply-device-manager.c:239]                create_devices_for_udev_device:found frame buffer device /dev/fb0
[ply-device-manager.c:189]                      fb_device_has_drm_device:trying to find associated drm node for fb device (path: platform-efi-framebuffer.0)
[ply-device-manager.c:212]                      fb_device_has_drm_device:no card entry!
[ply-device-manager.c:697] create_devices_for_terminal_and_renderer_type:creating devices for /dev/fb0 (renderer type: 2) (terminal: /dev/tty1)
[ply-renderer.c:236]                      ply_renderer_open_plugin:trying to open renderer plugin /usr/lib/plymouth/renderers/frame-buffer.so
[./plugin.c:257]                                create_backend:creating renderer backend for device /dev/fb0
[ply-terminal.c:599]                             ply_terminal_open:terminal /dev/tty1 is already open
[./plugin.c:500]                                  query_device:32 bpp (8, 8, 8, 8) with rowstride 8192
[./plugin.c:272]                               initialize_head:initializing 1600x900 head
[ply-renderer.c:256]                      ply_renderer_open_plugin:opened renderer plugin /usr/lib/plymouth/renderers/frame-buffer.so
[main.c:993]                             on_keyboard_added:listening for keystrokes
[main.c:997]                             on_keyboard_added:listening for escape
[main.c:1001]                             on_keyboard_added:listening for backspace
[main.c:1005]                             on_keyboard_added:listening for enter
[ply-device-manager.c:634]            create_pixel_displays_for_renderer:Adding displays for 1 heads
[main.c:1047]                        on_pixel_display_added:pixel display added before splash loaded, so loading splash now
[main.c:963]                                   show_splash:delaying show splash for 4.674831 seconds
[ply-event-loop.c:967]      ply_event_loop_stop_watching_for_timeout:no matching timeout found for removal
[ply-device-manager.c:983]         ply_device_manager_activate_keyboards:activating keyboards
[ply-terminal.c:396]                 ply_terminal_refresh_geometry:looking up terminal text geometry
[ply-terminal.c:408]                 ply_terminal_refresh_geometry:terminal is now 200x56 text cells
[ply-device-manager.c:670]             create_text_displays_for_terminal:adding text display for terminal /dev/tty1
[main.c:1074]                         on_text_display_added:text display added before splash loaded, so loading splash now
[main.c:963]                                   show_splash:delaying show splash for 4.667833 seconds
[ply-device-manager.c:983]         ply_device_manager_activate_keyboards:activating keyboards
[ply-device-manager.c:763] create_devices_for_terminal_and_renderer_type:activating keyboards
[ply-device-manager.c:303]                  create_devices_for_subsystem:found device /sys/devices/virtual/graphics/fbcon
[ply-device-manager.c:326]                  create_devices_for_subsystem:it's not initialized
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'boot-efi.mount'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 12
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 12
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 12 from epoll watch list: Bad file descriptor
[ply-boot-server.c:350]             print_connection_process_identity:connection is from pid 639 (/usr/bin/plymouth update-root-fs --read-write) with parent pid 1 (/sbin/init splash)
[ply-boot-server.c:441]                ply_boot_connection_on_request:got system initialized notification
[main.c:816]                         on_system_initialized:system now initialized, opening log
[main.c:1660]                 tell_systemd_to_print_details:telling systemd to start printing details
[main.c:738]                        get_log_file_for_state:returning log file '/var/log/boot.log'
[main.c:801]                               prepare_logging:opening log '/var/log/boot.log'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'plymouth-read-write.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'systemd-tmpfiles-setup.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'systemd-update-utmp.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'systemd-timesyncd.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'dbus.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'alsa-restore.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'systemd-machined.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'systemd-logind.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'bluetooth.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 14
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 14
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 14
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 14 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'NetworkManager.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 15
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 15
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 15
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 15 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'libvirtd.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'systemd-user-sessions.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 13
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 13
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 13 from epoll watch list: Bad file descriptor
[ply-boot-server.c:346]             print_connection_process_identity:connection is from toplevel init process (/sbin/init splash)
[ply-boot-server.c:401]                ply_boot_connection_on_request:got update request
[main.c:211]                                     on_update:updating status to 'systemd-hostnamed.service'
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 14
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 14
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 14
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 14 from epoll watch list: Bad file descriptor
[ply-boot-server.c:350]             print_connection_process_identity:connection is from pid 855 (plymouth --ping) with parent pid 829 (/usr/bin/lightdm)
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 14
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 14
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 14
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 14 from epoll watch list: Bad file descriptor
[ply-boot-server.c:350]             print_connection_process_identity:connection is from pid 856 (plymouth --has-active-vt) with parent pid 829 (/usr/bin/lightdm)
[ply-boot-server.c:666]                ply_boot_connection_on_request:got has_active vt? request
[ply-event-loop.c:1061]   ply_event_loop_handle_disconnect_for_source:calling disconnected_handler 0x55d4c7621d20 for fd 14
[ply-event-loop.c:1065]   ply_event_loop_handle_disconnect_for_source:done calling disconnected_handler 0x55d4c7621d20 for fd 14
[ply-event-loop.c:1144]   ply_event_loop_free_destinations_for_source:freeing destination (1, 0x55d4c7622410, 0x55d4c7621d20) of fd 14
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 14 from epoll watch list: Bad file descriptor
[ply-boot-server.c:350]             print_connection_process_identity:connection is from pid 857 (plymouth quit) with parent pid 829 (/usr/bin/lightdm)
[ply-boot-server.c:486]                ply_boot_connection_on_request:got quit request
[main.c:1360]                                       on_quit:quitting (retain splash: false)
[main.c:1372]                                       on_quit:system initialized so saving boot-duration file
[ply-utils.c:718]                          ply_create_directory:directory '/var/lib/plymouth/' already exists
[main.c:712]                       get_cache_file_for_mode:returning cache file '/var/lib/plymouth//boot-duration'
[ply-progress.c:214]                       ply_progress_save_cache:saving progress cache to /var/lib/plymouth//boot-duration
[main.c:1668]         tell_systemd_to_stop_printing_details:telling systemd to stop printing details
[main.c:1386]                                       on_quit:closing log
[ply-device-manager.c:1005]       ply_device_manager_deactivate_keyboards:deactivating keyboards
[ply-event-loop.c:761]               ply_event_loop_stop_watching_fd:stopping watching fd 11
[ply-event-loop.c:777]               ply_event_loop_stop_watching_fd:removing destination for fd 11
[main.c:1392]                                       on_quit:unloading splash
[main.c:1202]                                  quit_program:cleaning up devices
[ply-device-manager.c:522]                       ply_device_manager_free:freeing device manager
[ply-terminal.c:672]                            ply_terminal_close:restoring color palette
[ply-terminal.c:676]                            ply_terminal_close:stop watching tty fd
[ply-event-loop.c:761]               ply_event_loop_stop_watching_fd:stopping watching fd 11
[ply-event-loop.c:777]               ply_event_loop_stop_watching_fd:removing destination for fd 11
[ply-event-loop.c:786]               ply_event_loop_stop_watching_fd:no more destinations remaing for fd 11, removing source
[ply-terminal.c:682]                            ply_terminal_close:stop watching SIGWINCH signal
[ply-terminal.c:686]                            ply_terminal_close:setting buffered input
[ply-renderer.c:92]                             ply_renderer_free:Unloading renderer backend plugin
[ply-event-loop.c:967]      ply_event_loop_stop_watching_for_timeout:no matching timeout found for removal
[main.c:1205]                                  quit_program:exiting event loop
[ply-boot-server.c:314]          ply_boot_connection_on_quit_complete:quit complete
[ply-event-loop.c:645]             ply_event_loop_remove_source_node:failed to delete fd 7 from epoll watch list: Bad file descriptor
[main.c:2312]                                          main:exited event loop
[ply-boot-splash.c:390]                          ply_boot_splash_free:freeing splash
[main.c:2322]                                          main:freeing terminal session
[ply-terminal-session.c:535]             ply_terminal_session_stop_logging:stopping logging of incoming console messages
[main.c:2328]                                          main:exiting with code 0

[Artofaj]

I can confirm this bug being still present

[stu2005]

追加の情報欲しければ載せます。他のPCでも試すつもりです。

[Hayao0819]

NVIDIA GPUで動作するようになりました（ビルド時に--add-module nvidiaを追加）

https://twitter.com/Hayao0819/status/1435762502550241281

[stu2005]

やっと完全に解決しました
https://wiki.archlinux.jp/index.php/Kernel_Mode_Setting#Early_KMS_start
をやればいけます。

[Hayao0819]

Early KMS Startを暫定的にLive環境でNVIDIAに対応させました。
ただ、インストール後の環境にも適用させるには新しくmkinitcpio moduleを作成してパッケージングする必要があります。

d8d1829