Copyright (C) 2018-2020 Alexandre Borges <alexandreborges at blackstormsecurity dot com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
See GNU Public License on <http://www.gnu.org/licenses/>.
Important note: Malwoverview does NOT submit samples to Virus Total or Hybrid Analysis by
default. It submits only hashes, so respecting Non-Disclosure Agreements (NDAs). Nonetheless,
if you use the "-V" (uppercase), "-A" (uppercase) or "-P" (uppercase), so Malwoverview SUBMITS your
malware sample to Virus Total, Hybrid Analysis and Polyswarm, respectively. Additionally, options
"-Y" and "-T" also sent the Android package from Android device to Hybrid-Analysis and Virus
Total, respectively.
Malwoverview.py is a simple tool to perform an initial and quick triage of malware samples, URLs and hashes. Additionally, Malwoverview is able to show some threat intelligence information.
This tool aims to :
- Determine similar executable malware samples (PE/PE+) according to the import table (imphash) and group them by different colors (pay attention to the second column from output). Thus, colors matter!
- Show hash information on Virus Total, Hybrid Analysis, Malshare, Polyswarm, URLhaus, Alien Vault, i Malpedia and ThreatCrowd engines.
- Determining whether the malware samples contain overlay and, if you want, extract it.
- Check suspect files on Virus Total, Hybrid Analysis and Polyswarm.
- Check URLs on Virus Total, Malshare, Polyswarm, URLhaus engines and Alien Vault.
- Download malware samples from Hybrid Analysis, Malshare, HausURL, Polyswarm and Malpedia engines.
- Submit malware samples to VirusTotal, Hybrid Analysis and Polyswarm.
- List last suspected URLs from URLHaus.
- List last payloads from URLHaus.
- Search for specific payloads on the Malshare.
- Search for similar payloads (PE32/PE32+) on Polyswarm engine.
- Classify all files in a directory searching information on Virus Total and Hybrid Analysis.
- Make reports about a suspect domain using different engines such as VirusTotal, Malpedia and ThreatCrowd.
- Check APK packages directly from Android devices against Hybrid Analysis and Virus Total.
- Submit APK packages directly from Android devices to Hybrid Analysis and Virus Total.
- Show URLs related to an user provided tag from URLHaus.
- Show payloads related to a tag (signature) from URLHaus.
- Show information about an IP address from Virus Total, Alien Vault, Malpedia and ThreatCrowd.
- Show IP address, domain and URL information from Polyswarm.
- Perform meta-search on Polyswarm Network using several criterias: imphash, IPv4, domain, URL and malware family.
- Gather threat hunting information from AlienVault using different criteria.
- Gather threat hunting information from Malpedia using different criteria.
- Gather threat hunting information from ThreatCrowd using different criteria.
Alexandre Borges (project owner)
Corey Forman (https://github.com/digitalsleuth)
This tool has been tested on Ubuntu, Kali Linux 2020, REMnux, Windows 8.1 and 10. Malwoverview can be installed by executing the following command:
pip3.8 install git+https://github.com/alexandreborges/malwoverview (preferred method)
or...
python -m pip install -U malwoverview
or...
git clone https://github.com/alexandreborges/malwoverview
To use Malwoverview you should insert VirusTotal, Hybrid Analysis, URLHaus, Malshare, Polyswarm, Alien Vault and Malpedia APIs into the .malwapi.conf configuration file (the default one at the home directory -- if the file doesn't exist, so you should create it) or you could create a custom configuration file and indicate it by using the -c option.
A special note about the Alien Vault: it is necessary to subscribe to pulses on Alien Vault website before using -n 1 option.
The .malwapi.conf configuration file (from the the home directory) has the following format:
[VIRUSTOTAL]
VTAPI =
[HYBRID-ANALYSIS]
HAAPI =
[MALSHARE]
MALSHAREAPI =
[HAUSSUBMIT]
HAUSSUBMITAPI =
[POLYSWARM]
POLYAPI =
[ALIENVAULT]
ALIENAPI =
[MALPEDIA]
MALPEDIAAPI =
In Windows systems, when the package is installed using pip, the suggestion is to create the .malwapi.conf in either C:\Users<username> directory. Additionally, you don't need to specify "-w 1" option while using malwoverview.py on Windows anymore.
To check the installation, execute:
malwoverview.py --help
Further information is available on:
(PYPI.org repository) https://pypi.org/project/malwoverview/
(Github) https://github.com/alexandreborges/malwoverview
If you want to perform the manual steps, so few steps will be necessary:
-
Python version 3.8 or later (Only Python 3.x !!! It does NOT work using Python 2.7)
$ apt-get install python3.8 (for example)
-
Python-magic.
To install python-magic package you can execute the following command:
$ pip3.8 install python-magic
Or compiling it from the github repository:
$ git clone https://github.com/ahupp/python-magic $ cd python-magic/ $ python3.8 setup.py build $ python3.8 setup.py install
As there are serious problems about existing two versions of python-magic package, my recommendation is to install it from github (second procedure above) and copy the magic.py file to the SAME directory of malwoverview tool.
-
Install several Python packages:
$ pip3.8 install -r requirements.txt OR $ pip3.8 install -U pefile $ pip3.8 install -U colorama $ pip3.8 install -U simplejson $ pip3.8 install -U python-magic $ pip3.8 install -U requests $ pip3.8 install -U validators $ pip3.8 install -U geocoder $ pip3.8 install -U polyswarm-api $ pip3.8 install -U pathlib $ pip3.8 install -U configparser
-
To check an Android mobile you need to install the "adb" program by executing the following command:
# apt get install adb
PS: before trying Android's options, check:
* If the adb program is listed in the PATH environment variable. * If the system has authorized access to the device by using "adb devices -l"
-
Install the Python version 3.8.x or later from https://www.python.org/downloads/windows/
-
Python-magic.
To install python-magic package you can execute the following command:
C:\> python.exe -m pip install python-magic
Or compiling it from the github repository:
C:\> git clone https://github.com/ahupp/python-magic C:\> cd python-magic/ C:\> python.exe setup.py build C:\> python.exe setup.py install
-
Install several Python packages:
C:\> python.exe -m pip install -r requirements.txt OR: C:\> python.exe -m pip install -U pefile C:\> python.exe -m pip install -U colorama C:\> python.exe -m pip install -U simplejson C:\> python.exe -m pip install -U python-magic C:\> python.exe -m pip install -U requests C:\> python.exe -m pip install -U validators C:\> python.exe -m pip install -U geocoder C:\> python.exe -m pip install -U polyswarm-api C:\> python.exe -m pip install -U pathlib C:\> python.exe -m pip install -U configparser C:\> python.exe -m pip install -U python-magic-bin
-
To check an Android mobile you need to install the "adb" program by:
* Downloading and installing the Android Studio from: https://developer.android.com/ studio#downloads (Recommended) * Downloading it from https://dl.google.com/android/repository/platform-tools-latest-windows.zip
PS: before trying Android's options, check:
* If the adb program is listed in the PATH environment variable. * If the system has authorized access to the device by using "adb devices -l"
To use the malwoverview, execute the command as shown below:
root@ubuntu19:~/malwoverview# python3.8 malwoverview.py | more
usage: python malwoverview.py -c <API configuration file> -d <directory> -f <fullpath>
-b <0|1> -v <0|1|2|3> -a <0|1|2|3|4|5> -x <0|1> -w <0|1> -u <url> -H <hash file> -V <filename>
-D <0|1> -e<0|1|2|3|4> -A <filename> -g <job_id> -r <domain> -t <0|1> -l <1-14> -L <hash>
-U <url> -S <url> -z <tags> -K <0|1|2> -j <hash> -J <hash> -P <filename> -R <PE file, IP address,
domain or URL> -G <0|1|2|3|4> -y <0|1|2|3> -Y <file name> -Y <file name> -T <file name> -W <tag>
-k <signature> -I <ip address> -n <1|2|3|4|5> -N <argument> -M <1-8> -m <argument> -Q <1-5>
-q <argument>
Malwoverview is a malware triage tool written by Alexandre Borges.
optional arguments:
-h, --help Show this help message and exit
-c CONFIG FILE, --config CONFIG FILE
Use a custom config file to specify API's
-d DIRECTORY, --directory DIRECTORY
Specifies the directory containing malware samples.
-f FILENAME, --filename FILENAME
Specifies a full path to a malware sample. It returns general information
about the file (any filetype)
-b BACKGROUND, --background BACKGROUND
Adapts the output colors to a white terminal. The default is black terminal
-x OVERLAY, --overlay OVERLAY
Extracts the overlay (it is used with -f option).
-v VIRUSTOTAL, --virustotal VIRUSTOTAL
If using "-v 1", so it queries the Virus Total database for positives and
totals. If "v 2" (which can be used only together with -f option), so it
shows antivirus reports from the main players. If "v 3", so the binary's IAT
and EAT are also shown. Remember: you need to edit the .malwapi.conf and insert
your VT API.
-a HYBRID_ANALYSIS, --hybrid HYBRID_ANALYSIS
Queries the Hybrid Analysis database for getting a general report. Possible
values are: 1: Windows 7 32-bit; 2: Windows 7 32-bit (HWP Support); 3:
Windows 64-bit; 4: Android; 5: Linux 64-bit. Remember: you need to edit the
.malwapi.conf and insert your HA API and secret.
-u URL_VT, --vturl URL_VT
SUBMITS a URL to the Virus Total scanning.
-I IP_VT, --ipaddrvt IP_VT
This option checks an IP address on Virus Total.
-r URL_DOMAIN, --urldomain URL_DOMAIN
This option gets a domain's report from Virus Total.
-H FILE_HASH, --hash FILE_HASH
This option specifies the hash to be checked on Virus Total and Hybrid Analysis.
For the Hybrid Analysis report you must use it with the -e option.
-V FILENAME_VT, --vtsubmit FILENAME_VT
Submits a file(up to 32MB) for Virus Total scanning and gets the report. Attention:
use forward slash to specify the target file even on Windows systems. Furthermore,
the minimum waiting time is set up in 90 seconds because the Virus Total waiting
queue. If an error occurs, so wait few minutes and try to access the report by
using -f option.
-A SUBMIT_HA, --submitha SUBMIT_HA
Submits a file(up to 32MB) to be scanned by the Hybrid Analysis engine. Use the
-e option to specify the best environment to run the suspicious file.
-g HA_STATUS, --hastatus HA_STATUS
Checks the report's status of submitted samples to Hybrid Analysis engine by
providing the job ID. Possible returned status values are: IN_QUEUE, SUCCESS,
ERROR, IN_PROGRESS and PARTIAL_SUCCESS.
-D DOWNLOAD, --download DOWNLOAD
Downloads the sample from Hybrid Analysis, Malshare and Polyswarm. Options i
-H or -L (Hybrid Analysis and Malshare, respectively) must be specified as well
-O option for Polyswarm engine.
-e HA_ENVIRONMENT, --haenv HA_ENVIRONMENT
This option specifies the used environment to be used to test the samlple on
Hybrid Analysis: <0> Windows 7 32-bits; <1> Windows 7 32-bits (with HWP Support);
<2> Windows 7 64-bits; <3> Android; <4> Linux 64-bits environment. This option
is used together either -H option or the -A option.
-t MULTITHREAD, --thread MULTITHREAD
(optional) This option has several different meanings according to chosen the
value. Possible values: <1>: This value is used to force multithreads on Linux
whether: the -d option is specifed AND you have a PAID Virus Total API or you
are NOT checking the VT while using the -d option. PS1: using this option causes
Imphashes not to be grouped anymore; PS2: it also works on Windows, but there is
not gain in performance; <2>: This value should be used with -d option in
two scenarios: 1) either including the "-v 1" option (Virus Total -- you'll see
a complete VT response whether you have the private API) for a multithread searching
and reduced output; 2) or including the -a option (Hybrid Analysis) for a multithread
searching to get a complete and amazing output. If you are using the -a option, so
you should pickup the right number represening the testing environment to adjust the
output to your sample types. PS1: certainly, if you have a directory holding
many malware samples, so you will want to test this option with -a option; PS2: it
also works on Windows, but there is not gain in performance; <3>: You should use
this value with -v option if you have a public Virus Total API. It forces a one
minute wait every 4 malware samples, but allows obtaining a complete evaluation of
the malware repository.
-l MALSHARE_HASHES, --malsharelist MALSHARE_HASHES
This option shows hashes of a specific type from the last 24 hours from Malshare
repository. Possible values are: 1: PE32 (default) ; 2: Dalvik ; 3: ELF ; 4: HTML ;
5: ASCII ; 6: PHP ; 7: Java ; 8: RAR ; 9: Zip ; 10: UTF-8 ; 11: MS-DOS ; 12: data ;
13: PDF ; 14: Composite(OLE). You need to insert your Malshare API into the
.malwapi.conf file.
-L MALSHARE_HASH_SEARCH, --malsharehash MALSHARE_HASH_SEARCH
Searches for the provided hash on the Malshare repository. You need to insert your
Malshare API into the .malwapi.conf file. PS: sometimes the Malshare website is
unavailable, so should check the website availability if you get some error message.
-K HAUS_PAYLOAD_URL, --haus_payloadbatch HAUS_PAYLOAD_URL
THis option has few possible values: <1> Retrieves a list of downloadable links of
recent PAYLOADS (last 3 days, limited to 1000 entries) from URLHaus website; <2>:
Retrieves a list of recent URLs (last 3 days, limited to 1000 entries) from URLHaus
website. Take care: each link take you to download a passworless zip file containing
a malware, so your AV can generate alerts!
-U URL_HAUS_QUERY, --haus_query URL_HAUS_QUERY
Queries a URL on the URLHaus website.
-j HAUS_HASH, --haus_hash HAUS_HASH
Queries information about a provided payload's hash (md5 or sha256) on the URLHaus
website.
-S URL_HAUS_SUB, --haus_submission URL_HAUS_SUB
Submits a URL used to distribute malware (executable, script, document) to the
URLHaus website. Pay attention: Any other submission will be ignored/deleted from
URLhaus. You have to register your URLHaus API into the .malwapi.conf file.
-z [HAUSTAG [HAUSTAG ...]], --haustag [HAUSTAG [HAUSTAG ...]]
Associates tags (separated by spaces) to the specified URL. Please, only upper case,
lower case, '-' and '.' are allowed. This parameter is optional, which could be used
with the -S option.
-W [HAUSTAGSEARCH [HAUSTAGSEARCH ...]], --haustagsearch [HAUSTAGSEARCH [HAUSTAGSEARCH ...]]
This option is for searching malicious URLs by tag on URLhaus. Tags are case-senstive
and only upper case, lower case, '-' and '.' are allowed.
-k [HAUSSIGSEARCH [HAUSSIGSEARCH ...]], --haussigsearch [HAUSSIGSEARCH [HAUSSIGSEARCH ...]]
This option is for searching malicious payload by tag on URLhaus. Tags are
case-sensitive and only upper case, lower case, '-' and '.' are allowed.
-J HAUS_DOWNLOAD, --haus_download HAUS_DOWNLOAD
Downloads a malware sample (if it is available) from the URLHaus repository. It is
necessary to provide the SHA256 hash.
-P POLYSWARMFILE, --polyswarm_scan POLYSWARMFILE
(Only for Linux) Submits a sample to Polyswarm engine and performs a file scan.
-O POLYSWARMHASH, --polyswarm_hash POLYSWARMHASH
(Only for Linux) Performs a hash scanning using the Polyswarm engine. Optionally,
you can specify -D option to download the sample. Take care: Polyswarm enforces a
restriction to number of downloaded samples in 20/month.
-R POLYSWARMMETA, --polyswarm_meta POLYSWARMMETA
(Only for Linux) Provides the argument value for searches on Polyswarm engine through
imphash (the PE file must be provided), ipv4, domain, URL and family. This argument
must be used with -G option, so check it, please. Pay attention: you should check your
metadata search limit on your Polyswarm account because once you have got the limit,
so you will got an error.
-G METATYPE, --metatype METATYPE
(Only for Linux) This parameter specifies search type for arguments provided by
-R option (above) while searching on Polyswarm engine. Thus, the following values are
valid -- 0: PE Executable (look for samples with the same ImpHash); 1: IP Address ;
2: Domain ; 3. URL; 4. Family
-y ANDROID_HA, --androidha ANDROID_HA
This option has multiple options: <1>: Check all third-party APK packages from the
USB-connected Android device against Hybrid Analysis using multithreads. The Android
device does not need to be rooted and the system does need to
have the adb tool in the PATH environment variable; <2>: Check all third-party APK
packages from the USB-connected
Android device against VirusTotal using Public API (slower because of 60 seconds delay
for each 4 hashes). The Android device does not need to be rooted and the system does
need to have adb tool in the PATH environment variable; <3>: Check all third-party
APK packages from the USB-connected Android device against VirusTotal using
multithreads (only for Private Virus API). The Android device does not need to be
rooted and the system needs to have adb tool in the PATH environment variable.
-Y ANDROID_SEND_HA, --androidsendha ANDROID_SEND_HA
Sends an third-party APK package from your USB-connected Android device to Hybrid
Analysis. The Android device does not need to be rooted and the system needs to have
adb tool in the PATH environment variable.
-T ANDROID_SEND_VT, --androidsendvt ANDROID_SEND_VT
Sends an third-party APK package from your USB-connected Android device to Virus
Total. The Android device does not need be rooted and the system needis to have the
adb tool in the PATH environment variable.
-n ALIENVAULT, --alienvault ALIENVAULT
Checks multiple information from AlienVault. The possible values are: 1: Get the
subscribed pulses ; 2: Get information about an IP address; 3: Get information about
a domain; 4: Get information about a hash; 5: Get information about a URL
-N ALIENVAULT_ARGS, --alienvaultargs ALIENVAULT_ARGS
Provides argument to AlienVault -n option.The allowed values are: 1, 2, 3, 4, 5.
-M MALPEDIA, --malpedia MALPEDIA
This option is related to MALPEDIA and presents different meanings depending on the
chosen value. Thus, 1: List meta information for all families ; 2: List all actors
ID ; 3: List all available payloads organized by family from Malpedia; 4: Get meta
information from an specific actor, so it is necesary to use the -m option.
Additionally, try to confirm the correct actor ID by executing malwoverview with
option -M 3; 5: List all families IDs; 6: Get meta information from an specific
family, so it is necesary to use the -m option. Additionally, try to confirm the
correct family ID by executing malwoverview with option -M 5; 7: Get a malware
sample from malpedia (zip format -- password: infected). It is necessary to specifiy
the requested hash by using -m option; 8: Get a zip file containing Yara rules for
a specific family (get the possible families using -M 5), which must be specified
by using -m option.
-m MALPEDIAARG, --malpediarg MALPEDIAARG
This option provides an argument to the -M option, which is related to MALPEDIA.
-Q THREATCROWD, --threatcrowd THREATCROWD
Checks multiple information from ThreatCrowd. The possible values are: 1: Get
information about the provided e-mail ;
2: Get information about an IP address; 3: Get information about a domain; 4: Get
information about a provided MD5 hash; 5: Get information about a specific malware
family.
-q THREATCROWDARG, --threatcrowdarg THREATCROWDARG
This option provides an argument to the -Q option, which is related to THREATCROWD.
Remember that public VT API only allows 4 searches per second (as shown at the image above). Therefore,
if you are willing to wait some minutes, so you can use the -p option, which forces a one minute wait
every 4 malware samples, but allows obtaining a complete evaluation of the repository.
* ATTENTION 1: if the directory contains many malware samples while using -d option, so malwoverview.py
could take some time. Nonetheless, you can use the new -t option (multithreading) to
speed-up things. :)
** ATTENTION 2: All engines enforces quota of submission and/or verification per day and/or month.
Take care!
*** ATTENTION 3: Some options searching on Hybrid Analysis strongly depend of the "-e" option, which
specifies the environment. Therefore, to check an Android sample (for example) it is
necessary to use the right environment (-e 3 for Android).
**** ATTENTION 4: When you execute Malwoverview on Windows systems, you MUST to specify the "-w 1" option
if you've clone using git tool.
python3.8 malwoverview.py -d /root/malware/misc/
python3.8 malwoverview.py -d /root/malware/misc -t 1
python3.8 malwoverview.py -d /root/malware/misc -v 1 -t 3
python3.8 malwoverview.py -d /root/malware/misc -v 1 -t 1
python3.8 malwoverview.py -d /root/malware/misc -a 1 -t 2
python3.8 malwoverview.py -f /root/malware/misc/8a87a1261603af4d976faa57e49ebdd8fd8317e9dd13bd36ff25
99d1031f53ce -v 2
python3.8 malwoverview.py -f /root/malware/misc/806fc33650b7ec35dd01a06be3037674ae3cc0db6ba1e3f690ee
9ba9403c0627 -a 1 -v 1
python3.8 malwoverview.py -f /root/malware/misc/8a87a1261603af4d976faa57e49ebdd8fd8317e9dd13bd36ff25
99d1031f53ce -v 3
python3.8 malwoverview.py -f /root/malware/misc/blackstorm.php -v 2 -x
python3.8 malwoverview.py -u http://mobiletech.net/images/138907/8g7c645373370255099hf4at12buy2lgrdeqo/
python3.8 malwoverview.py -r xurl.es
python3.8 malwoverview.py -H 9ce861b93e7ddeebec8ed052450fc136162fb3239c502aab8fa9bc8962572457
python3.8 malwoverview.py -H 893339624602c7b3a6f481aed9509b53e4e995d6771c72d726ba5a6b319608a7 -e 1
python3.8 malwoverview.py -d /root/malware/linux/ -a 5
python3.8 malwoverview.py -d /root/malware/android/ -a 4
python3.8 malwoverview.py -d /root/malware/android/ -v 1 -t 3
python3.8 malwoverview.py -d /root/malware/android/ -a 4 -t 2
python3.8 malwoverview.py -V /root/malware/misc/malware999
python3.8 malwoverview.py -A /root/malware/android/NubankConvidado.apk -e 3
python3.8 malwoverview.py -g 5f2e727f70fa896603576725
python3.8 malwoverview.py -A /root/malware/windows/806fc33650b7ec35dd01a06be3037674ae3cc0db6ba1e3f690
ee9ba9403c0627
python3.8 malwoverview.py -l 1
python3.8 malwoverview.py -l 6
python3.8 malwoverview.py -l 4
python3.8 malwoverview.py -L bc9d356f8d08396d620d249b8f34a664c9397467b1a6033013c788df734f8bda
python3.8 malwoverview.py -K 1
python3.8 malwoverview.py -K 2
python3.8 malwoverview.py -U http://pusatppm.poltekkesbandung.com/wp-admin/report/b17892056589733xcz
cjkjvqctpr9v9sm/
python3.8 malwoverview.py -J 9e7d263c3c9f155229a7d6fb29dfa4b62bfec31ed0d3bf4cc2dc60ffd9fd6d0e
python3.8 malwoverview.py -S http://jamogames.com/templates/JLHk/
python3.8 malwoverview.py -S http://pusatppm.poltekkesbandung.com/wp-admin/report/b17892056589733xc
zcjkjvqctpr9v9sm/
python3.8 malwoverview.py -P 9e7d263c3c9f155229a7d6fb29dfa4b62bfec31ed0d3bf4cc2dc60ffd9fd6d0e
python malwoverview.py -O f3ebeeeba13c82daef9731a5f3e8dbe535e963f83e531918ba1a8904b094d3b8
python malwoverview.py -R /root/malware/windows/Scarab_Ransomware -G 0
python./malwoverview.py -R 164.132.92.180 -G 1
python3.8 malwoverview.py -R sndoffo79.ddns.net -G 2
python3.8 malwoverview.py -R http://0uso87.com/bolb/jaent.php?l=liut1.cab -G 3
python3.8 malwoverview.py -R *Trickbot* -G 4
python3.8 malwoverview.py -R *Trojan* -G 4
python3.8 malwoverview.py -R *Ransomware* -G 4
python3.8 malwoverview.py -y 1
python3.8 malwoverview.py -y 2
python3.8 malwoverview.py -y 3
python3.8 malwoverview.py -T icompass
python3.8 malwoverview.py -Y icompass
python3.8 malwoverview.py -k Trickbot | more
python3.8 malwoverview.py -W Quakbot
python3.8 malwoverview.py -I 149.56.79.215
python3.8 malwoverview.py -n 1 -N 12
python3.8 malwoverview.py -n 2 -N 79.124.8.24
python3.8 malwoverview.py -n 3 -N covid19tracer.ca
python3.8 malwoverview.py -n 4 -N ba42665872ea41e3d2edd8978bc38c24
python3.8 malwoverview.py -n 5 -N http://ksahosting.net/wp-includes/utf8.php
python3.8 malwoverview.py -M 1
python3.8 malwoverview.py -M 2 | more
python3.8 malwoverview.py -M 3 | more
python3.8 malwoverview.py -M 4 -m apt41 | mor
python3.8 malwoverview.py -M 5 | more
python3.8 malwoverview.py -M 6 -m win.locky
python3.8 malwoverview.py -M 7 -m efbdb14f38c20c55e32cd98e4b2fdf197709581581d31fac683aabbf361df5f3
python3.8 malwoverview.py -M 8 -m win.trickbot
python3.8 malwoverview.py -Q 1 -q [email protected]
python3.8 malwoverview.py -Q 2 -q 188.40.75.132
python3.8 malwoverview.py -Q 3 -q aoldaily.com
python3.8 malwoverview.py -Q 4 -q fa6fbd1dd2d58885772bd0b37633d5d7
python3.8 malwoverview.py -Q 5 -q plugx
Version 4.0.0:
This version:
* Introduces new engines such as Alien Vault, Malpedia and ThreatCrowd.
* The -s option has been removed. Use -v 2 option for antivirus report.
* The -n option is not longer associated to Malshare. Use -l option with
values between 1 and 14.
* To specify the hash in Malshare use the L option instead of -m option.
* The -i option has been removed. Use the -v 3 option for IAT/EAT.
* The -a option has been changed to include the system environments in Hybrid
Analysis. However, the -e option has been kept to be used with other options.
* The -M option is not longer responsible for downloading samples in Malshare. Use
-D option for this task.
* The -B option for list URLs from URLHaus has been replaced by -K 2 option.
* The -Z and -X options (related to Android) have been replaced for -y 2 and -y 3,
respectively.
* The -D option (download a malware sample) has been extended to Polyswarm.
* The malware sample's DLL list has been introduced.
* The -R and -G options from Polyswarm have been completely fixed. Additionally, both
ones also include the polyscore in the output.
* The -N option is not longer associated to Polyswarm .
* The -G 4 option has been introduced and it makes possible to search samples by
families and types such as "*Trickbot*", "*Ransomware", "*Trojan*" and so on.
* Colors from -I option have been fixed.
* The -w option has been removed.
* Several issues in the help have been fixed.
Version 3.1.2:
This version:
* Introduces the -c option that allows the user to specify a custom API configuration file.
* The API configuration file has been changed to .malwapi.conf file.
* The project structure has been changed to make easier to install it in different operating
systems.
* Updates for this version are a contribution from Corey Forman (https://github.com/digitalsleuth).
Version 3.0.0:
This version:
* Includes fixes in the URL reporting (-u option) from Virus Total.
* New players have have been included in the URL reporting (-u option) from Virus Total.
* Fixes have been included in payload listing (-K option) from URLhaus.
* Yara information has been include in the hash report (-m option) from Malshare.
* Fixes have been included in the -l option.
* New file types have been included in the -n option: Java, Zip, data, RAR, PDF, Composite (OLE),
MS_DOS and UTF-8.
* New -W option, which is used to show URLs related to an user provided tags from URLHaus.
* New -k option, which is used to show payloads related to a tag from URLHaus
* New -I option, which is used to show information related to an IP address from Virus Total.
* The -R option was refactored and now it supports searching for file, IPv4, domain or URL on
Polyswarm.
Version 2.5.0:
This version:
* Introduces the following options:
* -y to check all third-party APKs from an Android device against
the Hybrid Analysis.
* -Y to send a third-party APKs from an Android device to the Hybrid
Analysis.
* -Z to check all third-party APKs from an Android device against
the Virus Total.
* -X to check all third-party APKs from an Android device against the
Virus Total (it is necessary private API).
* -T to send a third-party APK from an Android device to Virus Total.
* Fixes several issues related to color in command outputs.
* Adds the filename identification in the report while sending a sample to Virus Total.
Version 2.1.9.1:
This version:
* Fixes several issues about colors in outputs.
* Removes the -L option from Malshare (unfortunately, Malshare doesn't provide an
URL list anymore).
* Removes the -c option.
* Introduces some verification lines in the URLHaus command.
Version 2.1:
This version:
* Fixes formatting issues related to Hybrid Analysis output (-Q 1 -a 1).
* Fixes color issues.
* Fixes small issues related to Polyswarm.
Version 2.0.8.1:
This version:
* Introduces installation using: pip3.8 install malwoverview (Linux) or
python -m pip install malwoverviewwin (Windows).
* Fixes small problems related to Polyswarm usage.
* Changes the help to verify whether the APIs were inserted into configmalw.py file.
Version 2.0.1:
This version:
* Fixes a problem related to searching by hash on Malshare (-m option).
* Fixes a problem related to searching by hash on Polyswarm (-O option).
Version 2.0.0:
This version:
* Introduces a completely ported version of Malwoverview to Python 3.x (it does not work in
Python 2.7.x anymore!)
* Fixes several bugs related to IAT/EAT listing.
* Fixes several bugs related to colors.
* Introduces multi-threading to some options.
* Introduces several options related to Malshare.
* Introduces several options related to URLHaus.
* Introduces several options related to Polyswarm engine.
* Changes the place of the API key configuration. Now you should edit the configmalw.py file.
* Changes the help libraries and functions, so making the Malwoverview's help more complete.
* Introduces geolocation feature by using the package named Geocoder written by Dennis Carrierre.
* Fixes problems related to Hybrid Analysis engine.
* Fixes several mistaked related to a mix between spaces and Tab.
* Extends the -d option to include Hybrid Analysis.
Version 1.7.5:
This version:
* It has been fixed a problem related to sample submission to Hybrid Analysis on Windows operating
system. Additionally, file name handling has been also fixed.
Version 1.7.3:
This version:
* Malwoverview has been adapted to API version 2.6.0 of Hybrid Analysis.
* -A option has been fixed according to new version (2.6.0) of Hybrid Analysis.
* -a option has been modified to work together with -e option.
* help information has been modified.
Version 1.7.2:
This version:
* A small fix related to -g option has been included.
Version 1.7.1:
This version:
* Relevant fix of a problem related to options -A and -H options.
* Includes a new Hybrid Analysis environment to the -e option (Windows 7 32-bits with HWP support).
* Updates the Malwoverview to support Hybrid Analysis API version 2.5.0.
Version 1.7.0:
This version:
* Includes -A option for submitting a sample to Hybrid Analysis.
* Includes -g option for checking the status a submission of a sample to Hybrid Analysis.
* Includes -e option for specifying the testing environment on the Hybrid Analysis.
* Includes -r option for getting a complete domain report from Virus Total.
* Modifies the -H options for working together the -e option.
* Modifies several functions of the tool to prepare it for version 1.8.0
Version 1.6.3:
This version:
* Includes creation of new functions aiming 1.7.0 version.
* Includes new exception handling blocks.
Version 1.6.2:
This version:
* Includes small fixes.
* For the Hybrid Analysis API version 2.40 is not longer necessary to include the API Secret.
Version 1.6.1:
This version:
* Includes small format fixes.
Version 1.6.0:
This version:
* It is using the Hybrid Analysis API version 2.4.0.
* Includes certificate information in the Hybrid Analysis report.
* Includes MITRE information in the Hybrid Analysis report.
* Includes an option to download samples from Hybrid Analysis.
Version 1.5.1:
This version:
* Small change to fix format issue in -d option.
Version 1.5.0:
This version:
* Includes the -u option to check URLs against Virus Total and associated engines.
* Includes the -H option to find existing reports on Virus Total and Hybrid Analysis through the
hash.
* Includes the -V option to submit a file to Virus Total. Additionally, the report is shown afer
few minutes.
* Includes two small fixes.
Version 1.4.5.2:
This version:
* Includes two small fixes.
Version 1.4.5.1:
This version:
* Includes one small fix.
Version 1.4.5:
This version:
* Adds the -w option to use malwoverview in Windows systems.
* Improves and fixes colors when using -b option with black window.
Version 1.4:
This version:
* Adds the -a option for getting the Hybrid Analysis summary report.
* Adds the -i option for listing imported and exported functions. Therefore, imported/exported
function report was decoupled for a separated option.
Version 1.3:
This version:
* Adds the -p option for public Virus Total API.
Version 1.2:
This version includes:
* evaluates a single file (any filetype)
* shows PE sessions.
* shows imported functions.
* shows exported function.
* extracts overlay.
* shows AV report from the main players. (any filetype)
Version 1.1:
This version:
* Adds the VT checking feature.
Version 1.0:
Malwoverview is a tool to perform a first triage of malware samples in a directory and group them
according to their import functions (imphash) using colors. This version:
* Shows the imphash information classified by color.
* Checks whether malware samples are packed.
* Checks whether malware samples have overlay.
* Shows the entropy of the malware samples.