feralai/picofightingboard

Open source PCB for arcade sticks using Raspberry Pi Pico.

picofightingboard's Issues

Is everything ok?

Hello! Just saw that you shut down the shop and nobody is able to reach you. Just not about the Pico FightingBoard but I hope you are ok.

need help with ws2812B wiring with pico fighting board v1.1

Good Day All,

I need help in wiring my ws2812B to the pico fighting board v1.1. I would like to ask if you have any pictures on how you wired them on your v1.1 pico.

I also would like to ask if I am suppose to press something to turn on the LED once connected, or does it light up right away as soon it is connected to a ps4 or pc?

Thank you again.

Corner screw holes aren't symmetric

I don't know if this is intentional, but it seems like the corner screw holes are slightly off-kilter (on the order of 0.1-0.2 mm in various directions). This made it a little bit annoying to 3D print a stand for the board.

Easier button remaping

So as I understand to remap buttons we need to install 1 GB KiCad software?
There is no other way?

I've created a to scale 3D model of the board and parts

Not quite sure how to contact you FaralAI but I created a to scale 3D model in CAD. Its in .step format so its easily loaded into many CAD programs. The intention is to aid people with designing 3D printed enclosures or CNC cut parts around your board design.

I've uploaded the .step file to my fork of your repo.

Please excuse my ignorance as I am new to GitHub contribution.

hi feralal can you make custom arcade encoder for me ?

controller name Massive Magnetics

xinput(xbox360) and ps3 support, xinput default
(when plug hold button1 = xinput, hold button2 =ps3)

two real stick output (not emulated) in pcb dpad and left anolog stick
(when plug hold select = change leftstick and dpad inputs)

socd support, up priorty default (L+R=notr,up+down=up)
(when plug hold start = socd on or off)

default settings key (when plug hold start+select all default)

Buttons:
left anolog stick(l-r-u-d)
dpad (l-r-u-d)
select
start
home
a
x
y
b
lt
rt
rb
lb

1000hz report rate
Selectable debounce setting 2-4-8 ms (with button ,jumper,led etc)
Driverless

i have atmega 8
pic16f24k50
arduino pro micro (mega32u4)
raspberry pi pico (rp2040)

i can pay paypal or donate ty.
sory for bad english