floretan/p150

Used Yamaha P150 keybed + Teensy 3.2 = Weighted MIDI keyboard!

p150's Issues

Arduino stm32 support

https://github.com/OwenDavid/Arduino-Stm32-midi-velocity-sensitive-piano-with-3-pedals/

Something might be wrong

First of all, I adapted your code to support arduino/stm32 so Thank You..As I am analyzing your code, I found out the bool switchA = (col) but after the incrementation of "col", it may be impossible to read pin(0).so i opened this issue.I am not really expert in programming but I hope this may call your attention.(link to my code https://github.com/OwenDavid/ArduinoMidiPiano-with-pedal-?files=1)

wiring the keybed on teensy

Hi i have a problem to connect wires from the keyboard matrix to the shift register and teensy. I'm new to it so i don't know how they works, i have your same diode matrix of 15 rows and 12c colums so i can use exactly your project but i don't understand how i have to connect rows to the shift register. do you have any schematics? thanks for the help! ps. my shift register is a sn74hc595n

Arduino mega compatible?

Hey. I want to build a similar project using an Arduino mega 2560. It doesn't allow midi via the native usb port so i would have to connect a din female end.. thats no prob.. i am not sure how to connect the key bed i have, korg sp200 weighted keys, to the arduino and adjust the code to work without the shift registers, its a 18+18 connector from the keybed

Arduino support/Stm32 support.

Link is here.much lower price .lower than teensy lc(12$)