fpdrozd/spree_cli

Spree CLI

Spree CLI is a tool that makes it easy to bootstrap a new Spree project. It provides an interactive process for configuring Spree backend (running in Dockerized, Hybrid or Native mode) and a selection of available frontends.

Usage

To get started, simply run the following command in your terminal:

npx @spree/cli generate store

This will launch the interactive process that will guide you through the process of setting up a new Spree-based store. Happy hacking!

Note: Node 14+ is required to run the CLI. Depending on your configuration, the CLI will also prompt you to install additional dependencies required by your desired setup.

Troubleshooting

1. NextJS storefront doesn't start properly

If the Storefront doesn't start you need to relaunch server manually. To do so you should navigate to /integration folder inside created project and type yarn dev into console.

2. NextJS storefront stops during launch

In case if the server is randomly stopping during launch it is advised to stop it (for example with ctrl + c) and repeat steps mentioned above.

If you have encountered any other problem with NextJS you can also refer to NextJs docs: https://github.com/vercel/commerce

Overview

This repository contains CLI to integrate spree and storefront of your choice

This repository is being developed and maintained by Upside