freakydude/freakydude.github.io

My freakydu.de blog

Published

You can find that site under

https://blog.freakydu.de

Clone, build and run source

Clone Source

git clone https://github.com/freakydude/freakydude.github.io

Init PaperMod submodule

git submodule add --depth=1 https://github.com/adityatelange/hugo-PaperMod.git themes/PaperMod
git submodule update --init --recursive

Build and run hugo server

• With installed hugo packages

  hugo serve

• With docker-compose

  docker-compose up server

freakydude.github.io's Issues

posts/2022-10-18-klipper_basic_macros_sidewinde_x2/

Must-have Mainsail, Klipper and Cura slicer configuration with Artillery Sidewinder X2 | freakyDude's Blog

Tutorial about the must-have Mainsail, Klipper and Cura slicer configuration files with Artillery Sidewinder X2.

https://blog.freakydu.de/posts/2022-10-18-klipper_basic_macros_sidewinde_x2/

posts/2023-03-23-use_bigtreetech_touchscreenfirmware_with_klipper_on_sidewinder_x2/

Use your TouchScreen with Klipper on Sidewinder X2 | freakyDude's Blog

Intro If you have been following my recent posts, you know that I switched from Marlin to Klipper firmware on my Artillery Sidewinder X2. If you have done the same, you may be experiencing the same problem as me. I have already received questions from you about how much better the printing results are with Klipper, but that is another topic.
Our integrated display is useless!
But I found a solution - well - not perfect yet, but more than OK for my main use cases.

https://blog.freakydu.de/posts/2023-03-23-use_bigtreetech_touchscreenfirmware_with_klipper_on_sidewinder_x2/

posts/2022-10-01-klipper_with_artillery_sidewinder_x2/

Klipper with Artillery Sidewinder X2 | freakyDude's Blog

Shows a way to use Klipper as a replacement for the Marlin firmware with your Sidewinder X2

https://blog.freakydu.de/posts/2022-10-01-klipper_with_artillery_sidewinder_x2/

posts/2022-12-23-reenable_sidewinder_x2_runout_sensor/

Re-enable the Artillery Sidewinder X2 Filament-Runout Sensor | freakyDude's Blog

The post shows you how you can re-enable the stock Artillery Sidewinder X2 filament-runout sensor and configure with the Klipper3D printer firmware afterwards.

https://blog.freakydu.de/posts/2022-12-23-reenable_sidewinder_x2_runout_sensor/

posts/2022-09-30-flash_marlin_sidewinderx2/

Flash latest Marlin firmware to Artillery Sidewinder X2 | freakyDude's Blog

Step by step guide to flash the my compiled Marlin firmware to the Artillery Sidewinder X2 printer

https://blog.freakydu.de/posts/2022-09-30-flash_marlin_sidewinderx2/

posts/2023-03-22-install_adxl345_calibrate_inputshaper_sidwinder_x2/

Perfect input shaping - Install the ADXL345 accelerometer on Artillery Sidewinder/Genius Pro | freakyDude's Blog

About installing the ADXL345 accelerometer to calibrate easily input shaping for an Artillery Sidewinder with Klipper firmware.

https://blog.freakydu.de/posts/2023-03-22-install_adxl345_calibrate_inputshaper_sidwinder_x2/

posts/2022-10-18-klipper_basic_macros_sidewinder_x2/

Must-have Mainsail, Klipper and Cura slicer configuration with Artillery Sidewinder X2 | freakyDude's Blog

Tutorial about the must-have Mainsail, Klipper and Cura slicer configuration files with Artillery Sidewinder X2.

https://blog.freakydu.de/posts/2022-10-18-klipper_basic_macros_sidewinder_x2/