fredblo/node-red-contrib-myhome-bticino-v2

Node-RED nodes pack to interact with Bticino / Legrand MyHome devices

node-red-contrib-myhome-bticino-v2's Issues

F454

I have the F454 webserver. Does this module also work? because I can't connect I get the following error:
"↵↵---------------------------------------------------------------------↵Your flow credentials file is encrypted using a system-generated key.↵↵If the system-generated key is lost for any reason, your credentials↵file will not be recoverable, you will have to delete it and re-enter↵your credentials.↵↵You should set your own key using the 'credentialSecret' option in↵your settings file. Node-RED will then re-encrypt your credentials↵file using your chosen key the next time you deploy a change.↵---------------------------------------------------------------------↵"
26/12/2023, 17:36:23
msg : string[31]
"Encrypted credentials not found"
26/12/2023, 17:36:23node: F-455
msg : string[78]
"gateway connection : disconnected from host, last known state was 'connected'."

Error while installing

LOGS:

2022-03-21T18:19:15.144Z npm install --no-audit --no-update-notifier --no-fund --save --save-prefix=~ --production --engine-strict [email protected]
2022-03-21T18:19:18.414Z [err] npm
2022-03-21T18:19:18.415Z [err] ERR!
2022-03-21T18:19:18.415Z [err] code EBADENGINE
2022-03-21T18:19:18.420Z [err] npm
2022-03-21T18:19:18.420Z [err] ERR!
2022-03-21T18:19:18.421Z [err] engine Unsupported engine
2022-03-21T18:19:18.421Z [err] npm
2022-03-21T18:19:18.421Z [err] ERR! engine
2022-03-21T18:19:18.421Z [err] Not compatible with your version of node/npm: [email protected]
2022-03-21T18:19:18.421Z [err] npm ERR!
2022-03-21T18:19:18.421Z [err] notsup Not compatible with your version of node/npm: [email protected]
2022-03-21T18:19:18.421Z [err] npm
2022-03-21T18:19:18.421Z [err] ERR! notsup Required: {"node":"^0.12.7"}
2022-03-21T18:19:18.421Z [err] npm ERR! notsup Actual: {"npm":"8.1.3","node":"v16.14.0"}
2022-03-21T18:19:18.436Z [err]
2022-03-21T18:19:18.436Z [err] npm ERR! A complete log of this run can be found in:
2022-03-21T18:19:18.436Z [err] npm ERR! /root/.npm/_logs/2022-03-21T18_19_18_422Z-debug.log
2022-03-21T18:19:18.448Z rc=1

Is MH200 module supported?

Hello, thanks for your contribution to the scs system. I didn’t see MH200 gateway on the supported device list. I’m wondering that whether this device is unsupported? Or just you haven’t tested on MH200?

Persistent connection not working with multiple commands

During testing, I noticed that when sending 2 commands in succession, the connection is re-established each time with the login.

This behavior causes a crash of the MH200 gateway when many commands are sent. Could this issue be resolved to prevent the gateway crash?

Gateway: MH200 (Keep alive 600 )
node-red: 3.0.2
node-red-contrib-myhome-bticino-v2: 2.3.0

Thank you for your attention.

16 Jan 08:48:27 - [info] [myhome-light:Corridoio -1] gateway connection : handshake acknowledged, asking for authentication if required...
16 Jan 08:48:27 - [info] [myhome-light:Corridoio -1] gateway connection : request to authenticate acknowledged, authenticating using basic password check...
16 Jan 08:48:27 - [info] [myhome-light:Corridoio -1] gateway connection : Connection successful !
16 Jan 08:48:27 - [info] [myhome-light:Corridoio -1] Command '*1*1*21##' sent using gateway...
16 Jan 08:48:27 - [info] [myhome-light:Corridoio -1] Command '*#1*21##' sent using gateway...
16 Jan 08:48:27 - [info] [myhome-gateway:MH-200] Received OpenWebNet command (OWN_LIGHTS) : '*1*1*21##'
16 Jan 08:48:27 - [info] [myhome-gateway:MH-200] Received OpenWebNet command (OWN_LIGHTS) : '*1*1*21##'
16 Jan 08:48:27 - [info] [myhome-gateway:MH-200] Received OpenWebNet command (OWN_OTHERS) : '*17*1*116##'
16 Jan 08:48:27 - [info] [myhome-gateway:MH-200] Received OpenWebNet command (OWN_OTHERS) : '*17*2*116##'
16 Jan 08:48:27 - [info] [myhome-gateway:MH-200] Received OpenWebNet command (OWN_LIGHTS) : '*1*1*21##'
16 Jan 08:48:28 - [info] [myhome-light:Corridoio -1] gateway connection : handshake acknowledged, asking for authentication if required...
16 Jan 08:48:28 - [info] [myhome-light:Corridoio -1] gateway connection : request to authenticate acknowledged, authenticating using basic password check...
16 Jan 08:48:28 - [info] [myhome-light:Corridoio -1] gateway connection : Connection successful !
16 Jan 08:48:28 - [info] [myhome-light:Corridoio -1] Command '*1*0*21##' sent using gateway...
16 Jan 08:48:28 - [info] [myhome-light:Corridoio -1] Command '*#1*21##' sent using gateway...
16 Jan 08:48:28 - [info] [myhome-gateway:MH-200] Received OpenWebNet command (OWN_LIGHTS) : '*1*0*21##'
16 Jan 08:48:28 - [info] [myhome-gateway:MH-200] Received OpenWebNet command (OWN_LIGHTS) : '*1*0*21##'

empty command_responses on inject node

Hi, when try to inject status request with inject node ( ex. *#1*32## - check status of 3.2 light)
in debug I see next thing:

{"command_sent":["*#1*32##"],"command_responses":[]}
so command_response is empty

but in same time if I connect monitoring node, I see that BUS responses (*1*0*32## - says it OFF) about status when I asked for it:

Reconnection error every minutes with mh201

I'm experiencing a loop (once every minutes more or less) of error with the connection with my MH201.
Here the related log from nodered

20/5/2021, 13:36:16node: MH201 msg : string[140] "gateway connection issue (Command not acknowledged (NACK) when already connected): last known state was 'connected', trying to re-connect..." 20/5/2021, 13:36:17node: MH201 msg : string[100] "gateway connection : disconnected from host, last known state was 'connected'. Auto retry activated." 20/5/2021, 13:36:17node: MH201 msg : string[113] "gateway connection issue (socket connection closed): last known state was 'disconnected', trying to re-connect..."

AM4510C Gateway

Hi to all,
Is the Bticino Gateway AM4510C compatibile with this node?
If not, how I can test it?
Thanks

Different local BUS addresses

Hi @FredBlo !

You did a wonderful work , thanks .
I have a question , in my Myhome installation I have no.2 F422 and 3 different local bus ( 0 , 1 , 2 ) .
The gateway is on BUS 0

I have tried to send commands on other bus using OpenWebNet documention - WHO1 _ page 7
Table WHERE you can see :
A PL #4# Int →Point to point of local bus

I tried to insert a different address on MH Light ( eg .51#4#02 - Light Bus2_A5_PL1 ) and seem work fine ! 👍
The only problem seem the invalid property on lightid when I deploy it

TURN ON
msg.payload : string[14]
*1*1*51#4#02##

TURN OFF
msg.payload : string[14]
*1*0*51#4#02##

Can you check it ? ( see attached flow )

flows_BUS TEST.zip

Many thanks !

Termostat

Hi
How can I set "setTemperature" parametr with node MH Thermo Zone? Any exampless?