gabro1984/at32f407_led_toggle

Example of a project for Artery MCU based on open source solutions

Simple LEDs blinking

======================================

The project forked from original"led_toggle" example from Arterytek Firmware Library
Download Arterytek at32f407 Firmware Library
but based on open source solutions to build and debug application.
You can use this project as a template to create more complex applications for Arterytek MCUs.

To build project cmake with a GNU toolchain are used.
Download GNU toolchain

To debug Arterytek openocd is used.
Download Arterytek openocd

To debug using VS Code editor openocd configuration is attached at .vscode folder.

Preparing

1. Install cmake.
   
2. Download an arm-none-eabi toolchain and add path to toolchain to the PATH enviroment variable.
   
3. Download Arterytek openocd and build it by following instructions from README file.
   

Building

1. Create and go to build directory
   mkdir build && cd build
   
2. Run cmake
   cmake ..
   
3. Build
   make -j8
   

Debugging

Just run VS code and start debug.

Note: if path to openocd configs was changed during openocd installation
you need to edit ".vscode/launch.json".