gcirino42/manaospre

A yocto based OS preview for the MagicModem

manaos preview release

Welcome to the meta-manaos yocto layer, powering the magicmodem!

This is currently a prerelease alpha. While this code has been used on a number of installations, it should be considered very early stage and listly tested.

The datapack is also in a very early stage and hasn't been extensively validated. The next steps are to sort out installations (primarily on the PCEngines APU2), add ARM target support, and to cut down on the lengthy list of TODOs.

Use at your own risk, and check out the license details.

Build

Building is roughly:

# arrange a basic yocto thud build, assuming the directory is poky:
mkdir mm && cd mm
git clone -b thud git://git.yoctoproject.org/poky.git
cd poky
git clone THISREPO
echo 'TEMPLATECONF=${TEMPLATECONF:-meta-manaos/conf}' > .templateconf

# Yocto help: https://www.yoctoproject.org/docs/2.6/brief-yoctoprojectqs/brief-yoctoprojectqs.html
# tools you probably need if you don't have them already, ubuntu example:
sudo apt-get install -y gawk wget git-core diffstat unzip texinfo gcc-multilib \
     build-essential chrpath socat cpio python python3 python3-pip python3-pexpect \
     xz-utils debianutils iputils-ping libsdl1.2-dev xterm

git checkout tags/yocto-2.6 -b mm
git clone https://github.com/openembedded/meta-openembedded.git
cd meta-openembedded && git checkout thud && cd ..

source oe-init-build-env
# customize to taste, then
bitbake core-image-minimal
# if it works...
../meta-manaos/scripts/glueimg.py

Sharp Edges

Here's a few gotchas:

• The resulting image will have no root password. Set one for non-dev use!
• use glueimg.py to make a complete image (see below)
• AP settings are not currently saved (coming!). Radio settings are currently defaulted for use in the US. Respect the RF laws and requirements of your country of operation before using this image with a wireless adapter!
• The simulation is currently only intended for a single user at a time. Attaching multiple users to the same MM will result in an unrealistic scenario (dividing the bandwidth), if you're concerned with accuracy.
• The ficticious country of Quamom (QM) is used for High, Medium, and Low profiles. These are based on real ISP data which was arbitrarily selected and will be subject to change when better criteria for determining this is available.

Gluing together a firmware

glueimg.py is a stand in until there's time to integrate WIC. Barring any errors, it usually drops the resulting image in /tmp/manaos.img, along with some hints on how to run it in VirtualBox or to dd a USB stick for booting hardware.

Basic Use

After writing an image out to a USB stick, it should boot on an APU2 or on VirtualBox (check the glueimg.py hints, which are still very sparse). To work around some boot issues, follow these steps:

1. Plug the WAN (left) port to your internet connection.
2. Plug your browser device to either of the bonded LAN ports (middle/right).
3. Turn the device on. Boot and calibration take about a minute.
4. After the WAN interface comes up, dhcp should work on the LAN ports. Check with ping 192.168.20.1 at a shell.
5. Navigate to http://192.168.20.1:9090/ and select an ISP through the search blank. Type either an ASN name, an ASN number, or an ISO3166 2 letter country code.
6. Selecting the plus icon will add it to your favorites, while selecting the tachometer icon will instantly shape your connection the median UTC midnight experience of that ISP (practical teleportation). Time traveling is planned for later.

NB - All routes are not currently shaped, mainly access to AWS and OpenConnect. There isn't an interface to adjust this yet.

License

See COPYING.MIT. Yocto software and included modules are under their own respective licenses (see the bitbake license src files).

---

In case you were wondering, it is actually a modem. A message is modulated at 1200bps and then demodulated during boot time. Thank you minimodem for the Bell202 implementation!