gieemek/comfoair_binding_modified

Expanded ComfoAir binding v.1x for openHAB with new 160 read and write commands.

comfoair_binding_modified's Issues

How connect both serial port & CC Ease ?

@gieemek Amazing job !
I found your code and your explanations extremely clear and simple.
Only one request: can you explain exactly how to connect the CC Ease and the serial port on the main board of the ConfoAir 350 ?
Thanks

Comfoair and mqtt

Hi,

it is possible that you implement a mqtt interface for make it possible to use it in home assistant?

Thanks

missing configuration script files

Hello, in your configuration there seems to be missing 2 script files:
comfoair_errorMsg and comfoair_errorMsgToSend
would it be possible to share these scripts ?
They make the documentation that is currently in main openhab repo unusefull, since the provided script is not working.
Thanks

How is the Exhaust&Supply, Supply only and Exhaust only mode controlled

Hello, I'm trying to figure out how the control of the fan mode is controlled on the recu unit. I could not find a relevant command in the comfoair protocol documentation, neither in the definition of the commands in your binding. Could you please help understanding it? I'm working on integrating the Comfoair device with Home Assistant.

Filter reset command does not reset filter hours

Hello,
I'm using this method to control the Comfo Air 350 unit and all works great except the function to reset the filter status. It resets it but after an hour it goes back to the filter full status. When digging deeper I've noticed that it does not reset the filter hours counter (available via command xDB) so when it increases by one hour the filter goes to full status again. Any idea what could be wrong or how to fix it?