gitter-badger/node-upb

A NodeJS library that generates (and will soon decode) UPB (Universal Powerline Bus) commands

node-upb

---

A NodeJS library that generates (and will soon decode) UPB (Universal Powerline Bus) commands. If you are looking for the CLI program that uses this, then please see upb-cli.

This has only been tested with Simply Automated switches! While probably won't harm your device (it is sending control commands, not core commands), I'm not sure what will happen when this is used with other branded switches (like PCS).

Installation

Install it to your project folder:

npm install upb

Then include it in your file:

var upb = require("upb");

Usage

generate(command, callback)

The function takes a JSON object input as command and returns a new JSON object with more data (including the generated command) as the first argument of the callback function. The second argument of the callback function is for errors.

If you plan on making your own serial implementation using this, remember to put the PIM in message mode first and to proceed each UPB command with the #20 character and to end it with the #13 character.

Example:

upb.generate({
	network: 21, 				// Required - Set Network ID. Use 0 for the global network (controls all devices)
	id: 4,						// Required - Set link or device ID
	type: "device",				// Required - Set whether to control a link or device
	source: 255,				// Optional - Set PIM source ID. Defaults to 255, which is almost always fine.
	cmd: "goto",				// Required - Set the command to send. You may also use the command numbers associated with those commands.
	level: 75,					// Optional - Set the level (percent). Accepts values 0 through 100. Required with goto and fade start. Only applies to goto, fadeStart, fadeStop, and toggle. Otherwise this will be ignored.
	rate: 5,					// Optional - Set the fade rate (seconds). Use false for instant on. Only applies to goto, fadeStart, and toggle. Otherwise  this will be ignored. Defaults to device settings.
	channel: false, 			// Optional - Set the channel to use. Use false for default. Only applies to goto, fadeStart, blink, and toggle. Otherwise this will be ignored. Only works on some devices. Defaults to off (command not sent).
	sendx: 2,					// Optional - Set the number of times to send the command. Accepts numbers 1 through 4. Defaults to 1.
	sendTime: 1,				// Optional - Send the number of time this command is sent out of the total (sendx). NOTE: THE PIM WILL AUTOMATICALLY SEND THE CORRECT NUMBER OF COMMANDS! So, this is only useful for display commands and not sending them. Accepts numbers 1 through 4. Cannot be greater than sendx. Defaults to 1.
	ackPulse: false,			// Optional - Request an acknowledge pulse. Defaults to false.
	idPulse: false, 			// Optional - Request an ID pulse. Defaults to false.
	ackMsg: true,  				// Optional - Request an acknowledge message. Defaults to false.
	powerlineRepeater: false,	// Optional - Request for the command to go through a powerline repeater. Set or numbers 1, 2, 4, or false. Defaults to false.
	blinkRate: 255,				// Optional - Set the blink rate (unknown unit). USE CAUTION WITH LOW NUMBERS! I'm not sure what unit this is in. Accepts values 1 through 255. Required for blink. Only applies to blink. Otherwise this will be ignored.
	toggleCount: 0,				// Optional - Set the toggle count. Required for toggle. Only applies to toggle. Otherwise this will be ignored.
	toggleRate: 5				// Optional - Set the toggle rate. Only applies to toggle. Otherwise this will be ignored. Defaults to 0.5.
}, function(commandNew, err) {
	if (err) throw err;							// Will trigger if there is an error in the supplied data
	console.log(commandNew.generated);			// 09441504FF224B0529
	console.log(JSON.stringify(commandNew));
	// {"source":255,"sendx":"2","ackPulse":false,"idPulse":false,"ackMsg":true,"powerlineRepeater":false,"sendTime":1,"network":"21","id":"4","type":"device","cmd":"goto","level":"75","rate":"5","ctrlWord":{"byte1":0,"byte2":9,"byte3":4,"byte4":4},"words":9,"hex":{"network":"15","id":"4","source":"ff","msg":"22","level":"4b","rate":"5","ctrlWord":{"byte1":"0","byte2":"9","byte3":"4","byte4":"4","fullByte1":"09","fullByte2":"44"}},"msg":22,"generated":"09441504FF224B0529","checksum":"29"}
});

validCommands

An array of valid commands

Example:

console.log(upb.validCommands);
// [ '20', 'activate', '21', 'deactivate', '22', 'goto', '23', 'fadeStart', '24', 'fadeStop', '25', 'blink', '27', 'toggle' ]

defaultCommand

An object with the optional defaults.

Example:

console.log(JSON.stringify(upb.defaultCommand));
// {"source":255,"sendx":1,"ackPulse":false,"idPulse":false,"ackMsg":false,"powerlineRepeater":false,"sendTime":1}

More Information

I got most of the information the last three items listed on this Simply Automated page: Tech Specs. I also experimented with my serial terminal to see responses of other switches.

• UPB System Description - This PDF describes all parts of the UPB protocol.
• **UPB Command Wizard - Software ** - This program lets you build commands with a wizard/GUI and see the result. It does not actually send the command, but it is very valuable for understanding the commands without reading too much of the above PDF.
• UPB Powerline Interface Module (PIM) - Description - This PDF contains information about the PIM. It shows serial sepcsifications (4800 baud 8-n-1) and PIM responses. It look me a while to figure out that the PIM always responds with PE whenever a command is not prefixed by the #20 character.