guillemcabo/mpw-multi-project-harness

Multi Project Harness

This is a proposal for handling multiple projects in the user project area of the Caravel harness

clone with --recursive to get the demo project seven segment seconds

You will also need cocotb and iverilog installed.

install iverilog from source git://github.com/steveicarus/iverilog.git
pip3 install cocotb

Process of adding a new design

Context 1: add to multi-project-harness

• add design as a submodule
• add a test to the test_harness.py

Context 2: Caravel

• clone caravel and add this repo as a submodule in caravel/verilog/rtl
• add firmware and test in caravel/verilog/dv/caravel/user_proj_example
• run the test and check your design is selected and generating expected signals. Best if the testbench actually checks something basic.
• see https://github.com/mattvenn/caravel/tree/multi-project/verilog/dv/caravel/user_proj_example/seven-segment-counter for an example

Context 3: OpenLane

Each design is hardened (turned into a GDS2 layout) and then aggrated into the top module. See here for more info

Simulation / Verification

run a simulation of activating one design and then the next:

make sim
make gtkwave

run a formal proof that the mux is correct

make formal