guniorobot/ardufrauenfelder

The ArduFrauenfelder is an Arduino compatible custom board with stepper motor drivers, running grbl. It's ultimate goal is to have stepper drivers AND Arduino all set into the same board.

ArduFrauenfelder

Copyright 2011 Design Tech Industries (DTI)
DTI site: www.mirrorshades.gs/DTI
DTI email: [email protected]

The ArduFrauenfelder is an Arduino compatible custom board with stepper motor drivers, running grbl.

Features:

• ATmega328 MCU
• SparkFun EasyDriver v4.4
• Power LED & Reset switch
• Populated pins for FTDI breakout board
• Mounting holes

You can view more at the ArduFrauenfelder page:

http://mirrorshades.gs/DTI/ArduFrauenfelder/

The "docs" folder within this repository includes a handy copy of the schematic in PDF format and images of the pcb.

In this repository you will find the project (.pro), netlist (.net), board (.brd) and schematic (.sch), along with a grbl file configured for the board.

At the moment there is only the project, schematic and netlist as it is an ongoing endeavor to create the board file satisfactorily. If you can help in this regard please contact me, as well as if you find something that needs correction

INSTALLATION

The design is saved as a Kicad project. Kicad is an open source PCB design suite and is free and available from http://kicad.sourceforge.net/. To use this project download it and place the directory containing these files into any directory on your computer. Then open Kicad and click file -> open then navigate to the directory where you saved the files, then open ArduFrauenfelder.pro (which is the Kicad project file).

DISTRIBUTION

The specific terms of distribution of this project are governed by the license referenced below.

LICENSE

This work is licensed under the Creative Commons Attribution-ShareAlike License.

To view a copy of this license, visit:

http://creativecommons.org/licenses/by-sa/3.0/
http://creativecommons.org/licenses/by-sa/3.0/legalcode

or send a letter to

Creative Commons
171 Second Street, Suite 300
San Francisco
California, 94105
USA

The "license" folder within this repository also contains copies of the licenses referenced above.

CREDITS

The ArduFrauenfelder was designed by Jamie Johnston ([email protected]) based on previous work by the Arduino team (www.arduino.cc/playground/Main/People) which includes:

• Massimo Banzi
• David Cuartielles
• Tom Igoe
• Gianluca Martino
• David A. Mellis