hanwckf/build-catdrive

build-catdrive's Issues

systemd-journald[155]: /dev/kmsg buffer overrun, some messages lost.

archlinux

solution maybe here:
https://wiki.gentoo.org/wiki/Systemd#.2Fdev.2Fkmsg_buffer_overrun.2C_some_messages_lost

/dev/kmsg buffer overrun, some messages lost
Problem
When booting the system displays an infinite loop of /dev/kmsg buffer overrun, some messages lost. The login screen to console never appears since the system never gets to that point in the boot process.
Solution
Most of the time this issue is caused when the CONFIG_POWER_SUPPLY_DEBUG option is enabled in the kernel. The current workaround is to disable this option in the kernel, then recompile, install, and boot the new kernel. The solution can also be found in this thread on the Gentoo forums. According to one user one the forum, this issue was also seen when using I2C EEPROM on an embedded system[1]. The solution in this case was to disable the CONFIG_I2C_DEBUG_CORE kernel option.

mvneta d0030000.ethernet eth0: bad rx status 0fa10000 (crc error)

[ 38.242511] mvneta d0030000.ethernet eth0: bad rx status 0fa10000 (crc error), size=96
[ 51.123704] mvneta d0030000.ethernet eth0: bad rx status 0fa10000 (crc error), size=533
[ 51.129534] mvneta d0030000.ethernet eth0: bad rx status 0fa10000 (crc error), size=470
[ 51.137458] mvneta d0030000.ethernet eth0: bad rx status 0fa10000 (crc error), size=525
[ 51.382688] mvneta d0030000.ethernet eth0: bad rx status 0fa10000 (crc error), size=470

这个问题请问怎么修复？

mvneta d0030000.ethernet eth0: bad rx status 0fa10000 (crc error)

boot into apline system
Report the following error：
[ 17.034530] mvneta d0030000.ethernet eth0: bad rx status 4fa10000 (crc error), size=348
[ 17.368066] mvneta d0030000.ethernet eth0: bad rx status 0cc10000 (crc error), size=66
[ 18.338153] mvneta d0030000.ethernet eth0: bad rx status 4fa10000 (crc error), size=98
[ 19.088206] mvneta d0030000.ethernet eth0: bad rx status 4da10000 (crc error), size=98
[ 19.366050] mvneta d0030000.ethernet eth0: bad rx status 0cc10000 (crc error), size=66
[ 19.680424] mvneta d0030000.ethernet eth0: bad rx status 0ec10000 (crc error), size=92
[ 19.853297] mvneta d0030000.ethernet eth0: bad rx status 4fa10000 (crc error), size=98

按教程刷新了armbian，无法设置静态IP地址

刷新了armbian，可按debian的方法，修改 /etc/network/interface

auto eth0
iface eth0 inet static
address 192.168.211.242/24

无法生效，请问一下需要静态地址的话，如何操作？

install_syno脚本

debian里面的 syno安装脚本没找到。
请问这里面包含有这个脚本吗