hongsukchoi / pose2mesh_release Goto Github PK
View Code? Open in Web Editor NEWOfficial Pytorch implementation of "Pose2Mesh: Graph Convolutional Network for 3D Human Pose and Mesh Recovery from a 2D Human Pose", ECCV 2020
License: MIT License
Official Pytorch implementation of "Pose2Mesh: Graph Convolutional Network for 3D Human Pose and Mesh Recovery from a 2D Human Pose", ECCV 2020
License: MIT License
Hi! And thank you for the awesome work!
How would you recommend dealing with missing keypoints? Should the corresponding rows in input.npy be filled with NaNs or 0s?
Which detector should I use that has eyes, nose, and pelvis like Posenet in the introduction picture?
Can I use the plevis coordinates as the center of both hips?
Hi,
I wondered how you are mapping different joint orders in case of multiple datasets. For example, when training on (human3.6 and coco) and I set in the configuration, the target joint set is set to coco format. How are you mapping human3.6 joints order to coco joints order?
Thanks in advance for your response
Hi, from the demo, it can generate a .obj file, but is it possible to also generate the pkl file in the format of smpl?
Hi,
I use your pretrained model and test on freihand data as below,
python main/test.py --gpu 0,1,2,3 --cfg ./asset/yaml/pretrained manoJ_test_freihand.yaml
the average error output is 4700.
Is it so?
Thank you for your sharing your great work, and hope your another work '3d crowdnet' will be published on the top conference. I am curious about how to deal with the errors of pose estimations, especially for some bottom-top methods, such as higher hrnet, in multi-person condition.
I am interested in your repo :)
Is there a J_regressor_coco.npy file uploaded?
I can't find the file.
I train the posenet with 'posenet_manoJ_train_freihand.yml',why the loss MPLPE is 0.0000?
Hi @hongsukchoi, thanks for the great work!
I was wondering how did you obtain the global orientation (pose[:3]
) for your surreal parsed data ? The pose
in your parsed file is different from the one in the original XXX_info.mat
files provided by surreal and I was unable to derive the same values from the raw data i.e. using the camera extrinsincs and intrinsics provided by surreal
I am trying to figure out how to make "input.npy" for any raw image. Can I use posenet (pretrained) to do so?
Hello, I notice that pred_mesh
has 12288 vertices in line 169 and then downsampled to 6890 vertices in line 170, as shown below.
Why not let the output has 6890 vertices? I think predict more vertices would make the network less efficient.
Lines 169 to 170 in c3a26ba
Pose2Mesh_RELEASE/lib/coarsening.py
Line 32 in e91bdd6
L /= lmax * 2
rather than L = 2.0*L / lmax
? Looking forward your reply.Hello, thank you for your amazing implementation
How can we measure the body measurements like waist, neck to hand, chest etc.
Thank you
In the demo, it outputs the mesh and rendered joints on 2D image for MANO. Is there a method to output betas & poses instead of the mesh? I have the labeled hand joints, but need to extract mano parameters (betas, poses).
Hi,
I trained pose2mesh on Human36m using
"pose2mesh_human36J_train_human36.yml"
, how can I test this model on PW3D ?
I'm looking forward to hearing from you. Many thanks!
Why the trans parameter of mano can be replaced by the T of the camera extrinsic?
Hi! I'd like to apply Pose2Mesh with my own data which has only OpenPose 25-joint annotations (which seems to be the 17 coco joints + neck + pelvis + 6 extra joints on the feet, as defined here).
Now that Pose2Mesh uses your customized COCO joints (original 17 + neck + pelvis) for 3DPW training, can I directly apply that pretrained model to my task?
If so, should I simply use the neck and pelvis joints that's contained in my openpose-25 annotations, or ignore them and recompute them using this line of code?
Thanks in advance, I just wanna make sure I'm using your model in a strictly correct way (great work by the way!).
Hi @hongsukchoi , superb work and thanks for sharing!
But I have a few questions about the training of PoseNet.
[1] According to Fig. 9 of the suppl, H3.6M and Coco have different definition of joint sets. Thus I am wondering how to combine these two datasets together (as shown in Table 9) to train PoseNet?
[2] Besides, when employing an off-the-shelf 2D pose detector, how to make sure that the input of PoseNet is consistent with the output of the 2D pose detector?
Best
Hello, thanks for you excellent work!
I started the coarsening process from SMPL template with 6890 vertices and could get graphs of nine different resolutions, but I have no idea how to get the corresponding vertex coordinates to visualize the coarse mesh model.
Hope for your suggestions. Thanks a lot!
Hello, thank you for your amazing implementation.
Is this Pose2Mesh_RELEASE repo were developed on windows 10 ?
Hi. Thanks for your code sharing.
I have a question about your code, part of multiple datasets loading.
class MultipleDatasets(Dataset):
...
def __getitem__(self, index):
if self.make_same_len:
db_idx = random.randint(0,self.db_num-1) # uniform sampling
data_idx = index % self.max_db_data_num
if data_idx >= len(self.dbs[db_idx]) * (self.max_db_data_num // len(self.dbs[db_idx])): # last batch: random sampling
data_idx = random.randint(0,len(self.dbs[db_idx])-1)
else: # before last batch: use modular
data_idx = data_idx % len(self.dbs[db_idx])
...
return self.dbs[db_idx][data_idx]
if data_idx >= len(self.dbs[db_idx]) * (self.max_db_data_num // len(self.dbs[db_idx])): # last batch: random sampling
data_idx = random.randint(0,len(self.dbs[db_idx])-1)
else: # before last batch: use modular
data_idx = data_idx % len(self.dbs[db_idx])
I cannot understand these 4 lines. When We get an item from this class.
For my understanding, data_idx should be [0, self.max_db_data_num * self.db_num -1] if self.make_same_len is true.
But the length of self.dbs[db_idx] can be smaller than data_idx. In this case, you can simply get the modular as valid data_idx.
But why do we need the condition like this?
if data_idx >= len(self.dbs[db_idx]) * (self.max_db_data_num // len(self.dbs[db_idx]))
And why data_idx should be drown out by random sampling in this case??
May be a trivial question, but i want to know your purpose! Thank you :)
Hello, much appreciate your amazing work!
I got one question here, how can I generate the *.npy
file for the demo file to generate the mesh *.obj
file.
What's more, for example, I have the 3d poses presented by three dimensions Cartesian coordinate system(xyz-axis). like the image below. How can I convert the original 3d pose to the *.npy
file?
Hello, thank you for your excellent work!
I am a beginner of 3D reconstruction,There are some doubts when reading your code
class OptimzeCamLayer(nn.Module):
def __init__(self):
super(OptimzeCamLayer, self).__init__()
self.img_res = 500 / 2
self.cam_param = nn.Parameter(torch.rand((1,3)))
def forward(self, pose3d):
output = pose3d[:, :, :2] + self.cam_param[None, :, 1:]
output = output * self.cam_param[None, :, :1] * self.img_res + self.img_res
return output
def get_model():
model = OptimzeCamLayer()
return model
Why are camera parameters random and how can they work correctly?
Hope to get your answer, thank you
Hi, Thanks for your amazing work.
I have trouble using your render.py code to visualize the ground truth mesh of Human3.6 dataset. I can get the vertices and faces from your dataloader. But when I try to render it, I can't find the camera parameters according to your function. I tried to use the rotation and translation, focal length, and principal point in the original dataset but the rendered result is blank.
Could you explain the camera parameters in the render.py? Are these parameters related to the camera parameters in the dataset?
Thank you very much
hi @hongsukchoi, you have done amazing work. and of course thanks for sharing it with us.
I am very interested in this domain. But from where I should start, getting no idea.
My system have windows 10 (seems like yours is Linux) with NVIDIA GeForce GTX 1050 Ti with 1T HDD. I have anaconda, pycharm, vs2015. While downloading the dataset its taking a lot of time and sometime getting aborted in middle. Can you advise me, how should I proceed?
Hi. Thanks for the great work! I had a rather elementary doubt. I wanted to obtain intermediate meshes obtained by mesh coarsening as you have visualized in your paper. The coarsen function takes just the input adjacency matrix as input and outputs the adjacency matrices corresponding to several coarsening levels. The input adjacency matrix is simply a matrix composed of 0s and 1s which indicate node connectivities. However, the other adjacency matrices look different i.e. are not composed of 0s and 1s, and hence I am having trouble understanding them. Could you please help me with how I should go about obtaining the intermediate meshes from the adjacency matrices corresponding to different coarsening levels?
Thanks in advance
Hi,
I noticed something peculiar in the augmentation part and hence, I'd be graetful if you could clarify this for me. Basically, in your dataset class (for example in Human36M/dataset.py), when you do rotation augmentation for the image (variable rot in degrees in your code), you're not doing the same to your mesh data (mesh_cam on line 352). Instead, only the 2D and 3D joints (joint_img and smpl_joint_cam) are augmented as follows :
"joint_img, trans = j2d_processing(joint_img.copy(), (cfg.MODEL.input_shape[1], cfg.MODEL.input_shape[0]), bbox, rot, 0, None)" on line 368
"joint_cam = j3d_processing(joint_cam, rot, flip, self.flip_pairs)" on line 373
Shouldn't the augmentation be also done for mesh_cam?
Thanks
Hi, is there code to draw human mesh on top of the original rgb picture as displayed in the paper?
A link in the readme file is broken.
Download basicModel_f_lbs_10_207_0_v1.0.0.pkl, basicModel_m_lbs_10_207_0_v1.0.0.pkl, and basicModel_neutral_lbs_10_207_0_v1.0.0.pkl from here (female & male)..
The "here" link is broken and now only the neural model is available.
Hi, thank you for putting up and share this excellent work. A siily question, I was trying to download the pretrained weights (as final_pth.tar), but had troubles even decompressing them. I m using a windows 10 pc and have tried 7z and tar command on colab notebook and jupyter notebook but none of them worked (I could decompress other tar files from other sources) so was wondering what tools I should use to decompress your weights files? Thank you
Hi ,
i try to use your amazing work to estimate a person volume by using the fitted SMPL Mesh. I was able to transform the Mesh in my respective camera coordinate system. I calculate for each body region (head, hands, arms, legs etc.) its respective volume and sum them up. I am using the world coordinates from the transformed mesh. A render to the image matches the persons silhouette.
But I found that different persons with different overall mesh representation seem to contain all similar volume of +- 0.05m^3.
It is crucial for my work to have a relatively good estimation of the persons volume but it seems that using the SMPL model wont be a good way to do this.
Could you give me ideas? Is this conversion from the SMPL Mesh to my camera coordinate system correct ? I feel it could be a scaling issue. I hope you could help me out.
BR
Hi,
Thank you for the great work. I had a small question about the data. For 3DPW and COCO, which has images with multiple people in it (even after cropping using the bounding box coordinates provided in your annotations), how did you decide which person to fit the mesh for? Attaching a cropped example for reference from the 3DPW dataset. I'd be grateful if you could let me know as I want to find out the correspondence between the person and the ground truth mesh for every image in COCO/3DPW datasets.
Hello, thank you for your amazing implementation
Can you provide a Google colab notebook to show the demo of this repo, I'm sure it'll help everyone and it'll increase the popularity of your repo as well and it'll be much appreciated,
Thank you
The performance of Pose2mesh on Human3.6M:
Training with Human3.6M:
MPJPE:64.9
PA-MPJPE:48.0
Training with Human3.6M and COCO:
MPJPE:67.9
PA-MPJPE:49.9
Best result:
MPJPE:64.9
PA-MPJPE:46.3
As mentioned in the paper,using more datasets to train Pose2mesh will decrease the performance on Human3.6M. I wonder the best result on Human3.6M is supposed to be trained with Human3.6M dataset only? In this case, the best result should be the same with the one trained with Human3.6M. Or it should be trained with Human3.6M+COCO+MuCo? Would you please show me the training settings on Human3.6M?
please add colab demo
When I tried to train the PostNet on the FreiHand dataset, I got the following errors:
File "/home/nankaingy/data/code/pose-shape/Pose2Mesh_RELEASE/main/../data/FreiHAND/dataset.py", line 202, in getitem
mano_mesh_cam, mano_joint_cam = self.get_mano_coord(mano_param, cam_param)
File "/home/nankaingy/data/code/pose-shape/Pose2Mesh_RELEASE/main/../data/FreiHAND/dataset.py", line 172, in get_mano_coord
R, t = np.array(cam_param['R'], dtype=np.float32).reshape(3, 3), np.array(cam_param['t'], dtype=np.float32).reshape(3)
KeyError: 'R'
Since the argument ‘cam_param’ loaded from 'freihand_train_data.json',the keys of ‘cam_param‘ dict in JSON file only contains 'focal' and 'princpt' without 'R' or 't', as shown below:
freihand_$SPLIT_data.json
|-- db_idx: {
‘cam_param’: {
‘focal’: focal lengths in x- and y-axis (intrinsic. pixel unit.),
‘princpt’: principal point coordinates in x- and y-axis (intrinsic. pixel unit.)
},
‘mano_param’: {
‘pose’: 48-dimensional mano pose vector (theta),
‘shape’: 10-dimensional mano shape vector (beta)
},
‘joint_3d’: 21x3 joint coordinates (MANO joint set. meter unit.) from mesh,
‘scale’: groundtruth scale provided from FreiHAND
}
How can I fix this?
In the original paper, it is mentioned that MoVi dataset is used to train PoseNet. However. no relevant parameters regarding training with MoVi dataset is found in sset/yaml/posenet_{input joint set}train{dataset list}.yml. I wonder how MoVi dataset comes into play here. Would you specify?
hello dear can you tell me which annotation tool you have use for annotating images. and after which i have to run , to create .npy file
and also can you give step by step tutorial
thanx in advance
Hello,I run the demo/run.py, get these outputs:
the right is the input and I use other pose estimation models to get 2D joints location.
the left is the output of pose2mesh.
the checkpoint is "pose2mesh_cocoJ_gt_train_human36_coco"
Would you like to tell me where the mistake is?
Looking forward to your reply.
Hi, @hongsukchoi. superb work and thanks for sharing!
I would like to ask how to generate gt smpl parameters on my data set? How to label smpl parameters for two-dimensional images.
I noticed that the parsed data is a little different from the original dataset (e.x. 3DPW). Could you please provide the code to generate parsed data?
Hi @hongsukchoi
Thank you for your sharing your great work! I’m a beginner of this domain. And I have some questions.
If I want to study the influence of input errors of each 2D joints, which part of the code should I change? For example, only the L_knee has errors in the input 2D joints.
I am running demo/run.py
with a human36 joint set. I am trying to create a mesh for a specific gender.
In SMPL.get_layer
, which is invoked when creating mesh_model
in demo/run.py
three different layers are created, one for each gender. However, then it appears that these gendered layers are the neutral layer is used for the face, or for the smpl joint regressor. How can I output a female/male mesh?
Hello Choi,
Thanks for the wonderful contribution. I was wondering what is joints order of the parsed data (17, 2). You mentioned in another issue you used (Gyeongsik Moon) work for parsing the data but I'm not sure which project exactly.
Thanks in advanced for your response
Hello, I recently read your other paper, 3DCrowdNet. I was greatly inspired and wanted to ask you when this code will be open source. Thank you and look forward to your reply
Hello! This work is very meaningful! I want to inference the video in 720P. How much can FPS achieve?
Following #32, I'm tring to visualize the groud truth and test result on 3DPW using your render_mesh function. It seems even the ground truth mesh cannot totally fit the image well. I wonder if this is normal ? Since the ground truth is obtained using SMPLify-X. Or should I follow the pipeline in demo/run.py to let the project_net to learn the camera params?
# get camera parameters
project_net = models.project_net.get_model(crop_size=virtual_crop_size).cuda()
joint_input = coco_joint_img
out = optimize_cam_param(project_net, joint_input, crop_size=virtual_crop_size)
# vis mesh
color = colorsys.hsv_to_rgb(np.random.rand(), 0.5, 1.0)
orig_img = render(out, orig_height, orig_width, orig_img, mesh_model.face, color)#s[idx])
cv2.imwrite(output_path + f'{img_name[:-4]}_mesh_{idx}.png', orig_img)
def render_mesh(img, mesh, face, cam_param): # mesh mesh = trimesh.Trimesh(mesh, face) rot = trimesh.transformations.rotation_matrix( np.radians(180), [1, 0, 0]) mesh.apply_transform(rot) material = pyrender.MetallicRoughnessMaterial(metallicFactor=0.0, alphaMode='OPAQUE', baseColorFactor=(1.0, 1.0, 0.9, 1.0)) mesh = pyrender.Mesh.from_trimesh(mesh, material=material, smooth=False) scene = pyrender.Scene(ambient_light=(0.3, 0.3, 0.3)) scene.add(mesh, 'mesh') focal, princpt = cam_param['focal'], cam_param['princpt'] camera = pyrender.IntrinsicsCamera(fx=focal[0], fy=focal[1], cx=princpt[0], cy=princpt[1]) scene.add(camera) # renderer renderer = pyrender.OffscreenRenderer(viewport_width=img.shape[1], viewport_height=img.shape[0], point_size=1.0) # light light = pyrender.DirectionalLight(color=[1.0, 1.0, 1.0], intensity=0.8) light_pose = np.eye(4) light_pose[:3, 3] = np.array([0, -1, 1]) scene.add(light, pose=light_pose) light_pose[:3, 3] = np.array([0, 1, 1]) scene.add(light, pose=light_pose) light_pose[:3, 3] = np.array([1, 1, 2]) scene.add(light, pose=light_pose) # render rgb, depth = renderer.render(scene, flags=pyrender.RenderFlags.RGBA) rgb = rgb[:,:,:3].astype(np.float32) valid_mask = (depth > 0)[:,:,None] # save to image img = rgb * valid_mask + img * (1-valid_mask) return img
Hi, I replaced the 3d keypoints with the ones that I got from VideoPose3D and the generated mesh look really weird. Is it because of any normalization that you processed with the 3D keypoints? Thanks.
hello
in demo/run.py path to weights set as model_chk_path = './experiment/exp_07-07_23:02:27.03/checkpoint'
i have problems:
Traceback (most recent call last):
File "/home/alexe1ka/my_experiments/Pose2Mesh_RELEASE/demo/../lib/funcs_utils.py", line 134, in load_checkpoint
checkpoint = torch.load(checkpoint_dir, map_location='cuda')
File "/home/alexe1ka/.pyenv/versions/my_env/lib/python3.7/site-packages/torch/serialization.py", line 581, in load
with _open_file_like(f, 'rb') as opened_file:
File "/home/alexe1ka/.pyenv/versions/my_env/lib/python3.7/site-packages/torch/serialization.py", line 230, in _open_file_like
return _open_file(name_or_buffer, mode)
File "/home/alexe1ka/.pyenv/versions/my_env/lib/python3.7/site-packages/torch/serialization.py", line 211, in init
super(_open_file, self).init(open(name, mode))
FileNotFoundError: [Errno 2] No such file or directory: './experiment/exp_07-07_23:02:27.03/checkpoint/checkpoint0.pth.tar'
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/home/alexe1ka/my_experiments/Pose2Mesh_RELEASE/demo/run.py", line 130, in
model, joint_regressor, joint_num, skeleton, graph_L, graph_perm_reverse = get_joint_setting(mesh_model, joint_category=joint_set)
File "/home/alexe1ka/my_experiments/Pose2Mesh_RELEASE/demo/run.py", line 96, in get_joint_setting
checkpoint = load_checkpoint(load_dir=model_chk_path)
File "/home/alexe1ka/my_experiments/Pose2Mesh_RELEASE/demo/../lib/funcs_utils.py", line 137, in load_checkpoint
raise ValueError("No checkpoint exists!\n", e)
ValueError: ('No checkpoint exists!\n', FileNotFoundError(2, 'No such file or directory'))
Process finished with exit code 1
where i can get this file?
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.