Control the AWS Deepracer wirelessly and directly with a gamepad. This was tested with a Logitech F710 but it should work with any joystick or game controller. If using a different controller, you may want to change the indices in lines 10 and 11 of file joy_cntl.py. A map of the controls for different joysticks can be found here. A lot of the info in this readme came from Mark Wolfe's Blog
The AWS Deepracer can be operated using the virtual joystick on the web interface but the lag in response time is horrendous. I recommend bypassing the web interface and controlling the racer directly and remotely with a gamepad. You can even watch the video stream from the front mounted camera while using the gamepad. It is not difficult to get up and running.
This repository will add two ROS nodes to control the AWS Deepracer directly using the Logitech F710 Gamepad thereby bypassing the web interface control.
The AWS Deepracer can be powered up directly by using the same USB-C power adapter that is used to charge the computer battery. The HDMI connector is full size but the USB is a micro port so an adapter must be used to connect a USB mouse, keyboard, and gamepad dongle.
This setup uses the Logitech F710 Gamepad. This gamepad is rock solid and requires no bluetooth setup. Just plug the included gamepad dongle and go. It also works great with the Raspberry Pi. It appears that the deepracer has no bluetooth which is another reason to use this gamepad.
Pre-installed AWS startup files load ROS components at boot time. This setup does not mess with the pre-installed components, it only adds additional ROS nodes. Not all of the original ROS nodes are used so you may eventually want to comment out unessential nodes in the file "/opt/aws/deepracer/share/deepracer_launcher/launch/deepracer.launch".
Install the ROS joystick package.
sudo apt-get install ros-kinetic-joy
Follow the instructions in section "Configuring the Joystick" to verify the joystick is working and accessible.
If you have not already created a catkin workspace in your home directory you can follow the instructions to create one.
cd ~/catkin_ws
git clone https://github.com/cmasenas/AWS-Deepracer-Gamepad-Control.git src
Make the python file executable and editable.
chmod +rwx ~/catkin_ws/src/deepracer_cntl/src/joy_cntl.py
To start the ROS nodes "joy" and "joy_cntl" navigate to the launch directory and use the launch file.
cd ~/catkin_ws/src/deepracer_cntl/launch
roslaunch deepracer_cntl joy_cntl.launch
All of the AWS pre-installed ROS code load at boot time so starting the joy_cntl launcher is the only thing necessary once the installation is done.
You can drive the deepracer remotely using only the gamepad and you can also view the camera feed on a network connected computer.
The deepracer hostname can be found on the underside of the deepracer.
ssh [email protected]
cd ~/catkin_ws/src/deepracer_cntl/launch
roslaunch deepracer_cntl joy_cntl.launch
To view the camera feed the firewall must first be stopped.
sudo ufw disable
Then the video stream can be viewed in a web browser.
http://HOSTNAME.local:8080/stream_viewer?topic=/video_mjpeg
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent