hypersolid-os/target.raspberry

raspberry pi image builder using standard debian userspace

RaspberryPI embedded image

Features

• Official Raspberry PI Kernel OR Debian ARM64 Kernel
• Official firmware (non-free binary blobs) (wifi, startup code)
• Standard Debian userpsace (armel, armhf or arm64)

Devices

The RaspberryPI SoC's using different chip architectures, therefore each generation requires another source repository - see debian wiki. Since late 2018 the debian stock kernel supports the raspberry pi

• Raspberry Pi 1 (A, B, A+, B+, Zero, Zero W) - armel
• Raspberry Pi 2 - armhf
• Raspberry Pi 3 (3, 3A+, 3B+) - arm64
• Raspberry Pi 4 - no official debian port available - arm64 should work with raspbian kernel

Build

You have to change the architecture depending on your target devices: edit the file ./config

32 bit - Raspberry 1 / ZERO / ZERO WH / CM

CONF_TARGET_DEVICE="rpi_zero_x86"

32 bit - Raspberry 2 / 3 / CM3

CONF_TARGET_DEVICE="rpi_3_x86"

64 bit - Raspberry 3 / CM3 / 4

CONF_TARGET_DEVICE="rpi_3_x64"

Additional informations can be found within the Debian Wiki

SD Card / File System layout

• Primary Partition 1: 128MB - bootloader files, dtb, kernel, initramfs (bootable flag!)
• Logical Partition 5: 1GB - system.img
• Logical Partition 6: 512MB - persistent config
• Logical Partition 7+: X - persistent data / user data

License

hypersolid is OpenSource and licensed under the Terms of GNU General Public Licence v2. You're welcome to contribute!