hyphop/mizy-uboot

advanced u-boot (for sunxi Orange Pi Zero | Zero Plus2 h3 | R1, and another sunxi boards ), ready for full load linux from spi-flash, i2c display, FEL mode, and many other improvement

mizy-uboot's Issues

2018.01

Hi! Any success updating to a recent u-boot version? Cheers

./uboot_build problem

OUTPUT ./uboot-mizy/u-boot-sunxi-with-spl.bin
ls: cannot access './uboot-mizy/u-boot-sunxi-with-spl.bin': No such file or directory

Linux ubuntu 4.4.0-67-generic #88-Ubuntu

U-Boot image data size mismatch

Hello,
I have an issue when testing image with sunxi-fel uboot option. Here is output for both 8 and 16Mb images.

sudo ./sunxi-fel -v uboot orange_pi_zero_miZy-music_box-mpd-net-SPI-beta_test.SPI.8M.bin
Stack pointers: sp_irq=0x00002000, sp=0x00005E08
Reading the MMU translation table from 0x00008000
Disabling I-cache, MMU and branch prediction... done.
=> Executing the SPL... done.
Setting write-combine mapping for DRAM.
Setting cached mapping for BROM.
Writing back the MMU translation table.
Enabling I-cache, MMU and branch prediction... done.
U-Boot image data size mismatch: expected 8355776, got 431447

sudo ./sunxi-fel -v uboot orange_pi_zero_miZy-music_box-mpd-net-SPI-beta_test.SPI.16M.bin
Stack pointers: sp_irq=0x00002000, sp=0x00005E08
MMU is not enabled by BROM
Generating the new MMU translation table at 0x00008000
=> Executing the SPL... done.
Setting write-combine mapping for DRAM.
Setting cached mapping for BROM.
Writing back the MMU translation table.
Enabling I-cache, MMU and branch prediction... done.
U-Boot image data size mismatch: expected 16744384, got 431447

u-boot mainline v2017.09 works with this command.