Script for managing Pterodactyl nodes
Pteronode allows you to create sets of allocations on one, many, or all of your IPs and Nodes with a simple command.
Run python pteronode.py --help for help. You can find us on Discord too
at https://discord.gg/q4AeCxgs.
Right now you need to clone this repo and install the dependencies and run it using Python.
git clone https://github.com/iamkubi/pteronode
cd pteronode
pip install -r requirements.txt
python pteronode.py --helpPre-built executables are available for Linux and Windows on the Release pages. You can use these without any dependencies.
wget -q https://github.com/iamkubi/pteronode/releases/download/1.0.2/pteronode && chmod u+x ./pteronode
./pteronode --version
# PteroNode 1.0.2Invoke-WebRequest -Uri https://github.com/iamkubi/pteronode/releases/download/1.0.2/pteronode.exe -OutFile pteronode.exe
.\pteronode.exe --version
# PteroNode 1.0.2There are two ways to specify your panel credentials. The easiest option is
to specify a config file. By default Pteronode will look for a
.pteronode.yml file in the current path. A valid config file looks like
this:
> cat .pteronode.yaml
panel: https://panel.test.com
api-key: your-application-api-key-hereAlternatively you can use the --panel and --api_key flags to specify
them on the command line.
python pteronode.py --api_key 1234 --panel https://test.com --list_nodesThis flag allows you to get a quick glance at all of the nodes on your panel. Especially useful for getting Node IDs to for when you want to add allocations.
> python pteronode.py --list_nodes
+----+-------+----------------+----------+--------+------------------+--------+----------------+-------------------+------------------+
| ID | Name | FQDN | Location | Memory | Allocated Memory | Disk | Allocated Disk | Total Allocations | Used Allocations |
+----+-------+----------------+----------+--------+------------------+--------+----------------+-------------------+------------------+
| 1 | test1 | test1.test.com | PDX1 | 62000 | 58000 | 200000 | 163000 | 111 | 23 |
| 2 | test2 | test2.test.com | US-E | 63000 | 0 | 350000 | 0 | 101 | 1 |
+----+-------+----------------+----------+--------+------------------+--------+----------------+-------------------+------------------+
Great, so I know my node IDs, now let's make some allocations. By default it will create the same set of allocations on every IP on every node on your panel.
> python pteronode.py --allocations=7777-7800,25565-25665,27015
PteroNode wants to add the following allocations:
+---------+--------------+----------------+---------------------------------------+
| Node ID | IP Address | IP Alias | Allocations |
+---------+--------------+----------------+---------------------------------------+
| 1 | 10.10.10.10 | 123.234.45.678 | ['7777-7800', '25565-25665', '27015'] |
| 2 | 12.34.45.111 | None | ['7777-7800', '25565-25665', '27015'] |
+---------+--------------+----------------+---------------------------------------+
Run again with --no_dry_run to take this action.
By default, this didn't do anything, it just prints out a table showing you
what it would create. Run the same command again with --no_dry_run to
execute the above.
> python pteronode.py --allocations=7777-7800,25565-25665,27015 --no_dry_run
PteroNode wants to add the following allocations:
+---------+--------------+----------------+---------------------------------------+
| Node ID | IP Address | IP Alias | Allocations |
+---------+--------------+----------------+---------------------------------------+
| 1 | 10.10.10.10 | 123.234.45.678 | ['7777-7800', '25565-25665', '27015'] |
| 2 | 12.34.45.111 | None | ['7777-7800', '25565-25665', '27015'] |
+---------+--------------+----------------+---------------------------------------+
Done! CACAW!
And that's it, it did it! Specifying any allocations that already exist will not cause an error. Those ports will be ignored, and it will create any ports from those ranges that do not exist.
This works similar to the way that adding allocations works, although currently it only supports a comma separated list of ports and does not support ranges.
python pteronode.py --allocations=27015,27016,27017,27018 --action=deleteThere's some more stuff you can do with filters. You can use --nodes to
specify a list of node IDs so that it will only add allocations on those nodes.
python pteronode.py --allocations=1234 --nodes=1,2,4You can filter by IP addresses too.
python pteronode.py --allocations=1234 --ip_addrs=1.1.1.1,8.8.8.8You can combine them too.
python pteronode.py --allocations=1234 --ip_addrs=1.1.1.1,8.8.8.8 --nodes=1
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent