This repository demonstrates the usage of serial communication between a Jetson Nano and a PC using C#. This communication can be used to send and receive data between the Jetson Nano and the PC.
Hardware Requirements
- Jetson Nano
- USB to TTL Serial Cable
- PC with C# installed
Software Requirements
- C#
Setting up the Jetson Nano
- Connect the USB to TTL Serial Cable to the Jetson Nano's UART ports.
- Make sure the baud rate is set to 9600.
- If necessary, install the necessary UART driver on the Jetson Nano.
Setting up the PC
- Connect the other end of the USB to TTL Serial Cable to the PC.
- Make sure the baud rate is set to 9600.
Usage
- Clone the repository by running git clone https://github.com/ikhwan12/jetson-pc-serialcom.git
- Open the project in Visual Studio and build it.
- Update the COM port of the PC in the code to match the port you are using.
- Deploy the code to the Jetson Nano and PC.
- Run the code on both the Jetson Nano and PC.
Action List
Action | Class | Description |
---|---|---|
Mute | 0 | -- |
Volume Up | 1 | -- |
Volume Down | 2 | -- |