intel/xengt-preview-xen

DISCONTINUATION OF PROJECT.

This project will no longer be maintained by Intel.

Intel has ceased development and contributions including, but not limited to, maintenance, bug fixes, new releases, or updates, to this project.

Intel no longer accepts patches to this project.

If you have an ongoing need to use this project, are interested in independently developing it, or would like to maintain patches for the open source software community, please create your own fork of this project.

xengt-preview-xen's Issues

Documentation of localgcc490fix.patch and PYTHON=python2

The documentation should be updated stating that the localgcc490fix.patch and PYTHON=python2 is required to to make it compileable.

(see https://aur.archlinux.org/packages/xe/xen-4.3/PKGBUILD)

Add support for Windows VM?!

Hi I'm no expert on VM but have some suggestions/questions to the project:

1. I see on presentation you say no IHV has tried to use SR-IOV but then what technology uses Nvidia in his Kepler cards that it calls they support true HW GPU virtualization and having support only right now on Citrix platform.. is SR-IOV or similar to yours?
2. for me the most important use of it is if you can support Windows as guest.. my recomendation is that you should work with Intel Windows graphics driver team so that we can apply this model to Windows guest machines also.. that would be awesome..
3. do you expect some serious issues if testing say with latest ubuntu releases like 13.10 or upcoming 14.04 beta?
4. Currently is Haswell graphics but I assume from that all Intel processors will be supported like Broadwell, right?
5. You said in september code drop in xengt setup guide had experimental HW video decode accel support.. "HW-accelerated Video Playback Preliminary Supported" but now I can't see that in the february guide.. has it support been removed?
   also you don't say if also we can access HW accel video encoding via libva Intel driver also or even if it's compatible with new Intel Media SDK for Linux which leverages that.. can you answer that?
6. also OpenCL on Intel GPUs for Linux platforms is coming via beignet project.. can also expect support for that? or it is already supported?

Support for gHyvi shown in USENIX ATC 2015 paper

Hi,
I was reading USENIX paper "Boosting GPU Virtualization Performance with Hybrid Shadow Page Tables" made by Intel employes..
I see: "gHyvi significantly improves gVirt’s performance for memory-intensive GPU workloads. Evaluation using GMedia shows that gHyvi can achieve up to 13x performance improvement compared to gVirt, and up to 85% native performance for multithread media transcoding."
In the paper is said code will be pushed to github eventually?
Any info to share on ETA?
Thanks..

Suggest a better format for installation doc

At least for evince on Ubuntu, if you copy and paste the commands, the character "-" would be messed up, causing a lot of errors.

That is actually pretty minor.
Anyway, the main reason for me being here is that I'm toying with the idea of running this on my Macbook Pro Retina late'13 (11,1), and I can't find a better place for questions like mailing list/forum/IRC.

Obviously using your stock config it won't boot, not even any display, so please spare some time to answer a few questions:

From the vague system requirement, it seems it would work? Since I'm still trying to figure out the correct kernel config, I'd love to know if it's worth trying in the first place.

Do you have any suggestion for the bare minimum config so I can at least get some console output just to figure out why it's failing?

Thanks mate.

Expose support for Intel GVT tech for MacOS (running Win or Lin VM under MacOS)?

Hi,
I know that may sound crazy but can we expect some support to Intel GVT on MacOS..
Ideally, for me at least, the solution I want would be to have GPU acceleration on Windows or Linux virtual machines running under MacOSX using a virtualization consumer product like VirtualBox (or Vmware Player)..
Could also be in theory running GPU accelerated MacOSX virtual machines under Windows (but these are is not officialy supported only hacks: http://www.sysprobs.com/guide-install-os-x-10-9-mavericks-on-vmware-workstation-with-windows-7-or-windows-8)..
Also other "hack" way could be as you seem to be working on support for KVM (KVMgt) and I see also KVM for OSX hacks are there (http://www.contrib.andrew.cmu.edu/~somlo/OSXKVM/) so perhaps is possible this way too.. don't know if somehow that requires Mac Intel GPU drivers to be modified to support Intel GVT similar to support for Windows was added needing new Intel GPU Windows drivers ..
Also don't know if these can help in bringing some Intel GVT tech to MacOS but seems 10.10 adds:
"Hypervisor (Hypervisor.framework). The Hypervisor framework allows virtualization vendors to build virtualization solutions on top of OS X without needing to deploy third-party kernel extensions (KEXTs). Included is a lightweight hypervisor that enables virtualization of the host CPUs."
thanks..

Flickers

At times the display flickers. It seems to happen randomnly, or at least I couldn't figure out the cause and effect.

KVM support

This project seems to target only XEN. As KVM is also used often by oss people, I'd like to see KVM support.
How much work would it be to port the XEN changes to KVM?
As the current work is mostly done by dom0, I think it should be possible to support KVM without huge redesigns.

Is there any roadmap for KVM support?

Do you think the client driver has to be touched for KVM support?

Error installing xen tools

I try to install XenGT on Xubuntu 14.04.2 but get the following error when i try to execute

"make install-tools PYTHON_PREFIX_ARG="

Traceback (most recent call last):
File "./tools/layoutrom.py", line 630, in
main()
File "./tools/layoutrom.py", line 607, in main
info16 = parseObjDump(infile16, '16')
File "./tools/layoutrom.py", line 538, in parseObjDump
relocsection = sectionmap[sectionname]
KeyError: '.text.asm.out/../src/smp.c.77'
make[6]: *** [out/romlayout16.lds] Fehler 1
make[6]: Verzeichnis »/home/heat/Xengt/XenGT-Preview-kernel/XenGT-Preview-xen/xen-vgt/tools/firmware/seabios-dir-remote« wird verlassen
make[5]: *** [subdir-all-seabios-dir] Fehler 2
make[5]: Verzeichnis »/home/heat/Xengt/XenGT-Preview-kernel/XenGT-Preview-xen/xen-vgt/tools/firmware« wird verlassen
make[4]: *** [subdirs-all] Fehler 2
make[4]: Verzeichnis »/home/heat/Xengt/XenGT-Preview-kernel/XenGT-Preview-xen/xen-vgt/tools/firmware« wird verlassen
make[3]: *** [all] Fehler 2
make[3]: Verzeichnis »/home/heat/Xengt/XenGT-Preview-kernel/XenGT-Preview-xen/xen-vgt/tools/firmware« wird verlassen
make[2]: *** [subdir-install-firmware] Fehler 2
make[2]: Verzeichnis »/home/heat/Xengt/XenGT-Preview-kernel/XenGT-Preview-xen/xen-vgt/tools« wird verlassen
make[1]: *** [subdirs-install] Fehler 2
make[1]: Verzeichnis »/home/heat/Xengt/XenGT-Preview-kernel/XenGT-Preview-xen/xen-vgt/tools« wird verlassen

make: *** [install-tools] Fehler 2

can anyone help me solving this error?

Skylake support ETA..

Hi, seems Skylake is coming in a month i.e.early August.. How far are we from seeing support in XenGT? I.e. Some ETA?

fatal:unable to connect to vgt.sh.intel.com

hi,
when I build Xen & qemu and enter "make -j8 xen tools", an error occurred, "fatal:unable to connect to vgt.sh.intel.com". why?

dmesg errors during host boot

I installed xengt on manjaro (ArchLinux). However, Windows 7 fails to boot after installing the intel driver (it just stays in the bootup screen).
If I set vgt=0 I actually see the HD4600 in the device manager.
I have a Core i7-4700HQ processor.

No enough available aperture/gm/fence

Hi

I'd like to start 3 windows 8 VMs and when first is up and running second won't pass. I get an error:

vGT info:(create_vgt_instance:120) vm_id=11, low_gm_sz=128MB, high_gm_sz=384MB, fence_sz=4, vgt_primary=1
vGT: create_vgt_instance: no enough available aperture/gm/fence!

CPU is i7-4790K with aperture size set in BIOS at 512MB. Auto won't help either.
I tried also on Gigabyte Brix with i7-4770R, Iris Pro graphics, fixed size 64MB aperture and problem is the same.

What does it mean and where is the problem ?

Thanks.

DormU detects 'Cirrus Logic GD5446' instead of Intel(R) Iris Pro Graphics 5200 (0D22) #19

HW is haswll, graphic is Iris Pro Graphics 5200

Following setup guide pdf , Dorm0 detects Intel(R) Iris Pro Graphics 5200 (0D22) and working fine.
DormU detects Cirrus Logic GD5446, not Iris Pro Graphics 5200 pass-through. It seems that passthrough not working but dmesg looks fine.

Any idea of whatI should debug or check? (I am new user of xen, any info is appreciated)

PS>I guess developer insert some msgs to tell if vga chip detected, working fine, etc. This kind of info is helpful

fail windows8

I have tried to operating Windows 8.1 with XenGT.
I was following the XenGT Setup Guide (July 15, 2014).
But I failed both Windows8.1 32bit / with 64bit Windows7 32bit.

When you install the driver,
Windows show "page_fault_in_nonpaged_area" error during installation,
and VM was forced to terminate.

But ubuntu (14.04 amd64) is works very well.

I was tested on Dell Optiplex 7010 (i7-3770, HD4000, 8GB Memory).
Host is Ubuntu 14.04 and Unity Desktop is not used.

Configuration(such as vgt_low_vm_sz, vgt_high_gm_sz) is same Setup Guide.
and I use direct display mode.
Windows driver is 15.33.22.3621.

Warnings on xl create

On 'xl create' following warnings appear if my .hvm file is set corresponding to the manual:
WARNING: specifying "tsc_mode" as an integer is deprecated. Please use the named parameter variant. e.g. tsc_mode="default"
WARNING: ignoring "kernel" directive for HVM guest. Use "firmware_override" instead if you really want a non-default firmware

Should I set it to
firmware_override = 'hvmloader'
tsc_mode=default
? If yes, I think the manual should be updated accordingly.

Texture broken in webgl

I installed xengt on my IvyBridge PC and encounter this trouble.

In my Linux DomU, if I run webgl acuarium (https://webglsamples.googlecode.com/hg/aquarium/aquarium.html),
the textures all all broken.

I'm not sure if it is because I'm using IvyBridge or a possible bug in xenGT.
If it is due to I'm using IvyBridge, I would like to purchase Haswell PC.

BTW, is this kind of trouble can happen in xenGT in theory?
I expect there shouldn't be such trouble because xenGT is basically based on pass-through.

Unable to connect to xenbits.xen.org, is there another way?

In the project, Intel GVT-g(XenGT) Pubic Release - Q1'2015, XenGT_Setup_Guide.pdf, chapter 3.3, Building Xen and Qemu.

In ubuntu 14.04 LTS, Use that two command:

git clone git://xenbits.xen.org/xen.git xen-vgt

git clone git://git.qemu-project.org/qemu.git qemu-xen

It always return:

正克隆到 'xen-vgt'...
fatal: unable to connect to xenbits.xen.org:
xenbits.xen.org[0: 50.57.170.242]: errno=连接超时
and
正克隆到 'qemu-xen'...
fatal: unable to connect to git.qemu-project.org:
git.qemu-project.org[0: 140.211.15.109]: errno=连接超时

Maybe the issue is in my network. So I have been down xen and qemu by http.

But when I do the command:

make -j8 xen tools

It will update from "xenbits git server", and also time out. So is there another way, I can download some package by myself, not auto. And then I can make it successful.

Windows 10 TP support on Intel WDDM2.0 drivers?

Hi,
just asking if XenGT supports Windows 10 TP with included new WDDM 2.0 drivers (Intel HD & Iris Graphics Drivers Version 10.18.15.4098 WHQL)?
thanks..

Support for / integration with Qubes OS?

Hi!
Not sure if it's the right place to ask, but do you plan any integration with / support for QubesOS (https://www.qubes-os.org/)?

As far as Xen projects go, it's one of the most fascinating, but GPU virtualization is sorely lacking there, and it appears the project itself doesn't have the resources to test and/or integrate XenGT in their Xen setup https://groups.google.com/forum/#!topic/qubes-users/DtdQA2p20wM

It would be extremely useful if GPU virtualization was brought there, and would be awesome if Intel Open Source Technology Center dedicated some resources to this task.

Sincerely,
Sarah

building xen and qemu error

hi,
thanks very much for your work and update.
after the latest update, there isn't any connection error.
But now still has some errors below, can someone tell me how to solve this?

正克隆到 'seabios-dir-remote.tmp'...
remote: Counting objects: 11458, done.
remote: Compressing objects: 100% (2714/2714), done.
remote: Total 11458 (delta 9226), reused 10940 (delta 8737)
接收对象中: 100% (11458/11458), 2.68 MiB | 12.00 KiB/s, done.
处理 delta 中: 100% (9226/9226), done.
检查连接... 完成。
切换到一个新分支 'dummy'
patch -p1 < /root/test1/XenGT-Preview-xen/xen-vgt/tools/firmware/../../tools/firmware/xengt_seabios.patch
patching file seabios-dir/src/optionroms.c
Hunk #1 succeeded at 428 with fuzz 1 (offset -50 lines).
cp seabios-config seabios-dir/.config;
make PYTHON=python subdirs-all
make[4]: 正在进入目录 /root/test1/XenGT-Preview-xen/xen-vgt/tools/firmware' make[5]: 正在进入目录/root/test1/XenGT-Preview-xen/xen-vgt/tools/firmware'
make -C seabios-dir all
Working around non-functional -combine
make[6]: 正在进入目录 /root/test1/XenGT-Preview-xen/xen-vgt/tools/firmware/seabios-dir-remote' Compiling IASL out/acpi-dsdt.hex Compiling IASL out/ssdt-proc.hex make[7]: warning: jobserver unavailable: using -j1. Add+' to parent make rule.
Compiling IASL out/ssdt-pcihp.hex
ASL Input: out/ssdt-proc.dsl.i - 35 lines, 765 bytes, 8 keywords
AML Output: out/ssdt-proc.aml - 120 bytes, 6 named objects, 2 executable opcodes
Listing File: out/ssdt-proc.lst - 2619 bytes
Hex Dump: out/ssdt-proc.hex - 1452 bytes

Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 0 Optimizations
out/ssdt-pcihp.dsl.i 12: Method (_EJ0, 1) { Return(PCEJ(0x01)) } Name (_SUN, 0x01) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 17: Method (_EJ0, 1) { Return(PCEJ(0x02)) } Name (_SUN, 0x02) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 22: Method (_EJ0, 1) { Return(PCEJ(0x03)) } Name (_SUN, 0x03) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 27: Method (_EJ0, 1) { Return(PCEJ(0x04)) } Name (_SUN, 0x04) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 32: Method (_EJ0, 1) { Return(PCEJ(0x05)) } Name (_SUN, 0x05) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 37: Method (_EJ0, 1) { Return(PCEJ(0x06)) } Name (_SUN, 0x06) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 42: Method (_EJ0, 1) { Return(PCEJ(0x07)) } Name (_SUN, 0x07) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 47: Method (_EJ0, 1) { Return(PCEJ(0x08)) } Name (_SUN, 0x08) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 52: Method (_EJ0, 1) { Return(PCEJ(0x09)) } Name (_SUN, 0x09) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 57: Method (_EJ0, 1) { Return(PCEJ(0x0a)) } Name (_SUN, 0x0a) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 62: Method (_EJ0, 1) { Return(PCEJ(0x0b)) } Name (_SUN, 0x0b) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 67: Method (_EJ0, 1) { Return(PCEJ(0x0c)) } Name (_SUN, 0x0c) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 72: Method (_EJ0, 1) { Return(PCEJ(0x0d)) } Name (_SUN, 0x0d) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 77: Method (_EJ0, 1) { Return(PCEJ(0x0e)) } Name (_SUN, 0x0e) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 82: Method (_EJ0, 1) { Return(PCEJ(0x0f)) } Name (_SUN, 0x0f) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 87: Method (_EJ0, 1) { Return(PCEJ(0x10)) } Name (_SUN, 0x10) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 92: Method (_EJ0, 1) { Return(PCEJ(0x11)) } Name (_SUN, 0x11) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 97: Method (_EJ0, 1) { Return(PCEJ(0x12)) } Name (_SUN, 0x12) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 102: Method (_EJ0, 1) { Return(PCEJ(0x13)) } Name (_SUN, 0x13) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 107: Method (_EJ0, 1) { Return(PCEJ(0x14)) } Name (_SUN, 0x14) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 112: Method (_EJ0, 1) { Return(PCEJ(0x15)) } Name (_SUN, 0x15) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 117: Method (_EJ0, 1) { Return(PCEJ(0x16)) } Name (_SUN, 0x16) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 122: Method (_EJ0, 1) { Return(PCEJ(0x17)) } Name (_SUN, 0x17) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 127: Method (_EJ0, 1) { Return(PCEJ(0x18)) } Name (_SUN, 0x18) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 132: Method (_EJ0, 1) { Return(PCEJ(0x19)) } Name (_SUN, 0x19) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 137: Method (_EJ0, 1) { Return(PCEJ(0x1a)) } Name (_SUN, 0x1a) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 142: Method (_EJ0, 1) { Return(PCEJ(0x1b)) } Name (_SUN, 0x1b) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 147: Method (_EJ0, 1) { Return(PCEJ(0x1c)) } Name (_SUN, 0x1c) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 152: Method (_EJ0, 1) { Return(PCEJ(0x1d)) } Name (_SUN, 0x1d) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 157: Method (_EJ0, 1) { Return(PCEJ(0x1e)) } Name (_SUN, 0x1e) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

out/ssdt-pcihp.dsl.i 162: Method (_EJ0, 1) { Return(PCEJ(0x1f)) } Name (_SUN, 0x1f) }
Warning 3104 - Reserved method should not return a value ^ (_EJ0)

ASL Input: out/ssdt-pcihp.dsl.i - 231 lines, 8975 bytes, 254 keywords
AML Output: out/ssdt-pcihp.aml - 1646 bytes, 130 named objects, 124 executable opcodes
Listing File: out/ssdt-pcihp.lst - 38613 bytes
Hex Dump: out/ssdt-pcihp.hex - 15779 bytes

Compilation complete. 0 Errors, 31 Warnings, 0 Remarks, 3 Optimizations
out/acpi-dsdt.dsl.i 135: Method (_CRS, 0)
Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within)

out/acpi-dsdt.dsl.i 264: Method (_CRS, 0, NotSerialized)
Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within)

out/acpi-dsdt.dsl.i 293: Method (_CRS, 0, NotSerialized)
Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within)

out/acpi-dsdt.dsl.i 309: Method (_CRS, 0, NotSerialized)
Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within)

out/acpi-dsdt.dsl.i 337: Method (_CRS, 0, NotSerialized)
Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within)

out/acpi-dsdt.dsl.i 364: Method (_CRS, 0, NotSerialized)
Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within)

out/acpi-dsdt.dsl.i 391: Method (_CRS, 0, NotSerialized)
Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within)

out/acpi-dsdt.dsl.i 453: Method (IQCR, 1, NotSerialized) {
Remark 2120 - ^ Control Method should be made Serialized (due to creation of named objects within)

ASL Input: out/acpi-dsdt.dsl.i - 612 lines, 22546 bytes, 326 keywords
AML Output: out/acpi-dsdt.aml - 4648 bytes, 163 named objects, 163 executable opcodes
Listing File: out/acpi-dsdt.lst - 147194 bytes
Hex Dump: out/acpi-dsdt.hex - 43904 bytes

Compilation complete. 0 Errors, 0 Warnings, 8 Remarks, 243 Optimizations
Build Kconfig config file
Compiling whole program out/ccode32flat.o
Compiling whole program out/code32seg.o
Compiling whole program out/ccode16.o
Compiling to assembler out/asm-offsets.s
Generating offset file out/asm-offsets.h
Compiling (16bit) out/romlayout.o
Building ld scripts
Version: rel-1.7.1-3-g3a28511-dirty-20141222_153940-rj-B85N-PHOENIX
Traceback (most recent call last):
File "./tools/layoutrom.py", line 630, in
main()
File "./tools/layoutrom.py", line 607, in main
info16 = parseObjDump(infile16, '16')
File "./tools/layoutrom.py", line 538, in parseObjDump
relocsection = sectionmap[sectionname]
KeyError: '.text.asm.out/../src/smp.c.77'
make[6]: *** [out/romlayout16.lds] 错误 1
make[6]:正在离开目录 /root/test1/XenGT-Preview-xen/xen-vgt/tools/firmware/seabios-dir-remote' make[5]: *** [subdir-all-seabios-dir] 错误 2 make[5]:正在离开目录/root/test1/XenGT-Preview-xen/xen-vgt/tools/firmware'
make[4]: *** [subdirs-all] 错误 2
make[4]:正在离开目录 /root/test1/XenGT-Preview-xen/xen-vgt/tools/firmware' make[3]: *** [all] 错误 2 make[3]:正在离开目录/root/test1/XenGT-Preview-xen/xen-vgt/tools/firmware'
make[2]: *** [subdir-install-firmware] 错误 2
make[2]:正在离开目录 /root/test1/XenGT-Preview-xen/xen-vgt/tools' make[1]: *** [subdirs-install] 错误 2 make[1]:正在离开目录/root/test1/XenGT-Preview-xen/xen-vgt/tools'
make: *** [install-tools] 错误 2

Intel Core M support?

Hi seems Core M is around the corner..
can we expect timely support for this Broadwell CPU? also with Windows GPU drivers supporting XenGT on Windows? is that coming in October reléase cited in 01.org?
thanks

Mouse hangs

When I move the mouse cursor outside of the screen in the vm the mouse hangs a little bit until it moves again.

RAM on host is not freed

After the domU has been closed the memory is oftentimes not freed.
In my case have 32Gb RAM and after all VM have been destroyed I end up with 10Gb ram left until I reboot.

How to use Indirect Mode Display?

I have tried to enable Indirect Mode display in my haswell PC.
I have applyed kernel parameter(xen_vgt.propagate_monitor_to_guest=0) and use monitor.conf by following manual.
But I can't see vgt display

Do I miss something to enable Indirect Mode display?

I think the functions from i915_gem_vgtbuffer.c is the one to enable Indirect Mode Display, Am i right?

Please give some guides to enable the Mode.

Unclear which graphics cards are supported

I've read some conflicting reports as I've research this on Google. Are any graphics cards driven by i915 supported? Or just Iris Pros? Could this be made explicit somewhere?

3 Windows VM

Is it possible to run 3 Windows VM with XenGT? If yes, on which hardware?

I only have 256MB available aperture size. dom0 uses half of this. So i can only run 1 Windows VM.

Problems with indirect mode

The documentation of the indirect mode is quite hard for me to understand and/or the indirect mode does not work properly for me:

• What are the advantages/disadavantages of direct/indirect mode? Do you need to use indirect mode for a multi montor setup, or is it also possible with direct mode?
• The parameter vgt_monitor_config_file is apparently not working; I can set for example:
  vgt_monitor_config_file=’/path/to/nonexistent/file.config’
  without an error message despite of having set xen_vgt.propagate_monitor_to_guest=0
• The commands 1-4 to plug in the virtual display do not work for me (1+3 write error, 2+4 do not change the files' contents)
• the contents of monitor.config are unclear for me:
  what is meant by

  first bit 1 for text mode, and second bit 2 for number of ports in the config

  11
  and are the EDIDs in monitor.config arbitrary?
• How to get the EDID?
  using
  cat /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-$_port_type-1/edid
  gives me an EDID with special characters including linebreaks. How do you let them be interpreted as one piece by bash?

Mouse invisible on host

Whenever I put a domU with vgt=1 with the intel driver installed my mouse cursor becomes invisible on dom0. The mouse's icon becomes stuck on the last position. The mouse continues to work on host as expected but stays invisible until dom0 is set to foreground again.

Dom0 framebuffer still very slow (is it working?)

Hello,

I'm seeing a lot of warnings and things that look like errors (with !) in dmesg and the framebuffer is very slow. I'm using CentOS, the latest version.

My dmesg is the following:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.0-rc4-vgt+ (felipe@felipe-notebook) (gcc version 4.8.3 20140911 (Red Hat 4.8.3-9) (GCC) ) #1 SMP Sat Aug 8 17:44:53 BRT 2015
[ 0.000000] Command line: root=UUID=2b8dc926-4b8d-42a5-aab2-6bec1bac238a rw rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 rhgb crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM ignore_loglevel console=tty0 console=hvc0 consoleblank=0 log_buf_len=4M xen_vgt.hvm_boot_foreground=1
[ 0.000000] Freeing 9d-100 pfn range: 99 pages freed
[ 0.000000] Released 99 pages of unused memory
[ 0.000000] Set 150667 page(s) to 1-1 mapping
[ 0.000000] Populating 80000-80063 pfn range: 99 pages added
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] Xen: [mem 0x000000000009d400-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x00000000ce28efff] usable
[ 0.000000] Xen: [mem 0x00000000ce28f000-0x00000000ce295fff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000ce296000-0x00000000ceec1fff] usable
[ 0.000000] Xen: [mem 0x00000000ceec2000-0x00000000cf397fff] reserved
[ 0.000000] Xen: [mem 0x00000000cf398000-0x00000000d7db3fff] usable
[ 0.000000] Xen: [mem 0x00000000d7db4000-0x00000000d7ffffff] reserved
[ 0.000000] Xen: [mem 0x00000000d8000000-0x00000000d8758fff] usable
[ 0.000000] Xen: [mem 0x00000000d8759000-0x00000000d87fffff] reserved
[ 0.000000] Xen: [mem 0x00000000d8800000-0x00000000d8f95fff] usable
[ 0.000000] Xen: [mem 0x00000000d8f96000-0x00000000d8ffffff] ACPI data
[ 0.000000] Xen: [mem 0x00000000d9000000-0x00000000da71bfff] usable
[ 0.000000] Xen: [mem 0x00000000da71c000-0x00000000da7fffff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000da800000-0x00000000dbcf5fff] usable
[ 0.000000] Xen: [mem 0x00000000dbcf6000-0x00000000dbffffff] reserved
[ 0.000000] Xen: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x000000041edfffff] usable
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. Latitude E7440/0R8KHW, BIOS A08 02/18/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x41ee00 max_arch_pfn = 0x400000000
[ 0.000000] e820: last_pfn = 0xdbcf6 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7fe00000-0x7fffffff]
[ 0.000000] [mem 0x7fe00000-0x7fffffff] page 4k
[ 0.000000] BRK [0x01b77000, 0x01b77fff] PGTABLE
[ 0.000000] BRK [0x01b78000, 0x01b78fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7fdfffff]
[ 0.000000] [mem 0x7c000000-0x7fdfffff] page 4k
[ 0.000000] BRK [0x01b79000, 0x01b79fff] PGTABLE
[ 0.000000] BRK [0x01b7a000, 0x01b7afff] PGTABLE
[ 0.000000] BRK [0x01b7b000, 0x01b7bfff] PGTABLE
[ 0.000000] BRK [0x01b7c000, 0x01b7cfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x7bffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x80000000-0xce28efff]
[ 0.000000] [mem 0x80000000-0xce28efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xce296000-0xceec1fff]
[ 0.000000] [mem 0xce296000-0xceec1fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcf398000-0xd7db3fff]
[ 0.000000] [mem 0xcf398000-0xd7db3fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd8000000-0xd8758fff]
[ 0.000000] [mem 0xd8000000-0xd8758fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd8800000-0xd8f95fff]
[ 0.000000] [mem 0xd8800000-0xd8f95fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd9000000-0xda71bfff]
[ 0.000000] [mem 0xd9000000-0xda71bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xda800000-0xdbcf5fff]
[ 0.000000] [mem 0xda800000-0xdbcf5fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x41edfffff]
[ 0.000000] [mem 0x100000000-0x41edfffff] page 4k
[ 0.000000] log_buf_len: 4194304 bytes
[ 0.000000] early log buf free: 126048(96%)
[ 0.000000] RAMDISK: [mem 0x01f7b000-0x02e06fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041edfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x41edfffff]
[ 0.000000] NODE_DATA [mem 0x7dc9b000-0x7dc9efff]
[ 0.000000] kexec: crashkernel: memory value expected
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x41edfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xce28efff]
[ 0.000000] node 0: [mem 0xce296000-0xceec1fff]
[ 0.000000] node 0: [mem 0xcf398000-0xd7db3fff]
[ 0.000000] node 0: [mem 0xd8000000-0xd8758fff]
[ 0.000000] node 0: [mem 0xd8800000-0xd8f95fff]
[ 0.000000] node 0: [mem 0xd9000000-0xda71bfff]
[ 0.000000] node 0: [mem 0xda800000-0xdbcf5fff]
[ 0.000000] node 0: [mem 0x100000000-0x41edfffff]
[ 0.000000] On node 0 totalpages: 4170100
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13968 pages used for memmap
[ 0.000000] DMA32 zone: 893912 pages, LIFO batch:31
[ 0.000000] Normal zone: 51128 pages used for memmap
[ 0.000000] Normal zone: 3272192 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdd200000-0xdf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce28f000-0xce295fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xceec2000-0xcf397fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7db4000-0xd7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8759000-0xd87fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8f96000-0xd8ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda71c000-0xda7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdbcf6000-0xdbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.3.1 (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880 s82880 r8192 d23616 u524288
[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4104919
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=2b8dc926-4b8d-42a5-aab2-6bec1bac238a rw rd_NO_LUKS rd_NO_LVM LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 rhgb crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM ignore_loglevel console=tty0 console=hvc0 consoleblank=0 log_buf_len=4M xen_vgt.hvm_boot_foreground=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] software IO TLB mem 0x69400000-0x6d400000 mapped at [ffff880069400000-ffff88006d3fffff]
[ 0.000000] Memory: 1700228K/16680400K available (5624K kernel code, 728K rwdata, 3064K rodata, 1036K init, 1108K bss, 14980172K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:4352 nr_irqs:728 0
[ 0.000000] xen:events: Using 2-level ABI
[ 0.000000] xen: sci override: global_irq=9 trigger=0 polarity=0
[ 0.000000] xen: registering gsi 9 triggering 0 polarity 0
[ 0.000000] xen: --> pirq=9 -> irq=9 (gsi=9)
[ 0.000000] xen: acpi sci 9
[ 0.000000] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 0.000000] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 0.000000] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 0.000000] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 0.000000] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 0.000000] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 0.000000] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 0.000000] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 0.000000] xen: --> pirq=10 -> irq=10 (gsi=10)
[ 0.000000] xen: --> pirq=11 -> irq=11 (gsi=11)
[ 0.000000] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 0.000000] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 0.000000] xen: --> pirq=14 -> irq=14 (gsi=14)
[ 0.000000] xen: --> pirq=15 -> irq=15 (gsi=15)
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled
[ 0.000000] Xen: using vcpuop timer interface
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] tsc: Detected 2693.816 MHz processor
[ 2.816867] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.63 BogoMIPS (lpj=2693816)
[ 2.817151] pid_max: default: 32768 minimum: 301
[ 2.817257] ACPI: Core revision 20140724
[ 2.846344] Security Framework initialized
[ 2.848064] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 2.850873] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 2.852005] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 2.852175] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 2.852673] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 2.852851] CPU: Physical Processor ID: 0
[ 2.852952] CPU: Processor Core ID: 0
[ 2.853850] mce: CPU supports 2 MCE banks
[ 2.854041] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 2.854349] Freeing SMP alternatives memory: 24K (ffffffff81a3a000 - ffffffff81a40000)
[ 2.855248] Performance Events: unsupported p6 CPU model 69 no PMU driver, software events only.
[ 2.855701] installing Xen timer for CPU 1
[ 2.856824] installing Xen timer for CPU 2
[ 2.857971] installing Xen timer for CPU 3
[ 2.859049] x86: Booted up 1 node, 4 CPUs
[ 2.859311] devtmpfs: initialized
[ 2.859910] PM: Registering ACPI NVS region mem 0xce28f000-0xce295fff
[ 2.860129] PM: Registering ACPI NVS region mem 0xda71c000-0xda7fffff
[ 2.860487] RTC time: 14:57:41, date: 08/09/15
[ 2.860673] NET: Registered protocol family 16
[ 2.860811] xen:grant_table: Grant tables using version 1 layout
[ 2.860922] Grant table initialized
[ 2.861537] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 2.861708] ACPI: bus type PCI registered
[ 2.861973] PCI: MMCONFIG for domain 0000 [bus 00-3f] at mem 0xf8000000-0xfbffffff
[ 2.862185] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 2.866611] PCI: Using configuration type 1 for base access
[ 2.866733] dmi type 0xB1 record - unknown flag
[ 2.872838] ACPI: Added _OSI(Module Device)
[ 2.872954] ACPI: Added _OSI(Processor Device)
[ 2.873071] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 2.873198] ACPI: Added _OSI(Processor Aggregator Device)
[ 2.874805] ACPI: SCI (ACPI GSI 9) not registered
[ 2.880555] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 3.025841] ACPI: Interpreter enabled
[ 3.025965] ACPI: (supports S0 S3 S4 S5)
[ 3.026078] ACPI: Using IOAPIC for interrupt routing
[ 3.026285] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 3.305360] ACPI: PCI Root Bridge PCI0
[ 3.305559] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 3.305974] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 3.306286] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 3.306699] PCI host bridge to bus 0000:00
[ 3.306869] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 3.307043] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 3.307216] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 3.307398] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 3.307582] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 3.307770] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 3.307956] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 3.308140] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 3.308323] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 3.308507] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 3.308690] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
[ 3.308883] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 3.309187] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 3.309389] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 3.309586] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 3.309814] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 3.310114] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 3.310309] pci 0000:00:03.0: reg 0x10: [mem 0xf7e34000-0xf7e37fff 64bit]
[ 3.310642] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 3.310848] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit]
[ 3.311114] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 3.311318] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 3.311533] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 3.311742] pci 0000:00:16.0: reg 0x10: [mem 0xf7e3f000-0xf7e3f01f 64bit]
[ 3.312023] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 3.312278] pci 0000:00:16.3: [8086:9c3d] type 00 class 0x070002
[ 3.312469] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7]
[ 3.312653] pci 0000:00:16.3: reg 0x14: [mem 0xf7e3d000-0xf7e3dfff]
[ 3.313013] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
[ 3.313212] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff]
[ 3.313400] pci 0000:00:19.0: reg 0x14: [mem 0xf7e3c000-0xf7e3cfff]
[ 3.313578] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 3.313842] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 3.324211] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 3.324454] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 3.324647] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e30000-0xf7e33fff 64bit]
[ 3.324933] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 3.325132] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 3.325374] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 3.325653] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 3.325865] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 3.326040] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 3.326223] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 3.326466] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 3.326749] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 3.326956] pci 0000:00:1c.3: Enabling MPC IRBNCE
[ 3.327131] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled
[ 3.327312] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 3.327554] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ 3.327836] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 3.328048] pci 0000:00:1c.4: Enabling MPC IRBNCE
[ 3.328219] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[ 3.328401] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 3.328642] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 3.328835] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e3b000-0xf7e3b3ff]
[ 3.329152] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 3.329349] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 3.329570] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 3.329968] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 3.330165] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 3.330340] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 3.330515] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 3.330691] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 3.330869] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 3.331052] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e3a000-0xf7e3a7ff]
[ 3.331280] pci 0000:00:1f.2: PME# supported from D3hot
[ 3.331521] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 3.331720] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e39000-0xf7e390ff 64bit]
[ 3.331920] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 3.332240] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 3.332586] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
[ 3.332866] pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d01fff 64bit]
[ 3.333374] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 3.333688] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 3.336250] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 3.336456] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 3.338569] pci 0000:03:00.0: [1217:8520] type 00 class 0x080501
[ 3.338764] pci 0000:03:00.0: reg 0x10: [mem 0xf7c01000-0xf7c01fff]
[ 3.338949] pci 0000:03:00.0: reg 0x14: [mem 0xf7c00000-0xf7c007ff]
[ 3.339300] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 3.339510] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 3.343652] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 3.343829] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 3.344088] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 3.379779] xen: registering gsi 18 triggering 1 polarity 0
[ 3.379903] xen: --> pirq=18 -> irq=18 (gsi=18)
[ 3.380062] ACPI: PCI Interrupt Link LNKA
[ 3.380400] ACPI: PCI Interrupt Link LNKB
[ 3.380722] ACPI: PCI Interrupt Link LNKC *0, disabled.
[ 3.381121] ACPI: PCI Interrupt Link LNKD
[ 3.381450] ACPI: PCI Interrupt Link LNKE
[ 3.381763] ACPI: PCI Interrupt Link LNKF
[ 3.382073] ACPI: PCI Interrupt Link LNKG
[ 3.382380] ACPI: PCI Interrupt Link LNKH *0, disabled.
[ 3.419765] ACPI : EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930
[ 3.419940] xen:balloon: Initialising balloon driver
[ 3.447145] xen_balloon: Initialising balloon driver
[ 3.447406] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 3.447565] vgaarb: loaded
[ 3.447684] vgaarb: bridge control possible 0000:00:02.0
[ 3.447876] SCSI subsystem initialized
[ 3.448031] libata version 3.00 loaded.
[ 3.448157] ACPI: bus type USB registered
[ 3.448304] usbcore: registered new interface driver usbfs
[ 3.448437] usbcore: registered new interface driver hub
[ 3.448584] usbcore: registered new device driver usb
[ 3.448785] PCI: Using ACPI for IRQ routing
[ 3.451430] PCI: pci_cache_line_size set to 64 bytes
[ 3.451620] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 3.451752] e820: reserve RAM buffer [mem 0xce28f000-0xcfffffff]
[ 3.451883] e820: reserve RAM buffer [mem 0xceec2000-0xcfffffff]
[ 3.452014] e820: reserve RAM buffer [mem 0xd7db4000-0xd7ffffff]
[ 3.452148] e820: reserve RAM buffer [mem 0xd8759000-0xdbffffff]
[ 3.453882] e820: reserve RAM buffer [mem 0xd8f96000-0xdbffffff]
[ 3.454013] e820: reserve RAM buffer [mem 0xda71c000-0xdbffffff]
[ 3.454144] e820: reserve RAM buffer [mem 0xdbcf6000-0xdbffffff]
[ 3.454278] e820: reserve RAM buffer [mem 0x41ee00000-0x41fffffff]
[ 3.454481] NetLabel: Initializing
[ 3.454592] NetLabel: domain hash size = 128
[ 3.454711] NetLabel: protocols = UNLABELED CIPSOv4
[ 3.454843] NetLabel: unlabeled traffic allowed by default
[ 3.455140] Switched to clocksource xen
[ 3.457091] pnp: PnP ACPI init
[ 3.457487] system 00:00: [io 0x0680-0x069f] has been reserved
[ 3.457643] system 00:00: [io 0xffff] has been reserved
[ 3.457796] system 00:00: [io 0xffff] has been reserved
[ 3.457949] system 00:00: [io 0xffff] has been reserved
[ 3.458108] system 00:00: [io 0x1c00-0x1cfe] has been reserved
[ 3.458278] system 00:00: [io 0x1d00-0x1dfe] has been reserved
[ 3.458440] system 00:00: [io 0x1e00-0x1efe] has been reserved
[ 3.458601] system 00:00: [io 0x1f00-0x1ffe] has been reserved
[ 3.458766] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 3.458929] system 00:00: [io 0x164e-0x164f] has been reserved
[ 3.459102] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.459243] xen: registering gsi 8 triggering 1 polarity 0
[ 3.459440] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 3.459634] system 00:02: [io 0x1854-0x1857] has been reserved
[ 3.459815] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 3.460062] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 3.460238] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.460385] xen: registering gsi 1 triggering 1 polarity 0
[ 3.460578] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 3.460713] xen: registering gsi 12 triggering 1 polarity 0
[ 3.460911] pnp 00:05: Plug and Play ACPI device, IDs DLL05cb PNP0f13 (active)
[ 3.495432] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (disabled)
[ 3.495816] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.496159] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 3.496339] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 3.496501] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 3.496663] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 3.496826] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 3.496988] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 3.497150] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 3.497339] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 3.497502] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 3.497664] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
[ 3.497826] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 3.497988] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 3.498153] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.542516] pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 3.554575] pnp: PnP ACPI: found 10 devices
[ 3.560611] PM-Timer failed consistency check (0xffffff) - aborting.
[ 3.560807] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 3.560977] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 3.561158] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 3.561328] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 3.561507] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 3.561685] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 3.561849] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 3.562022] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 3.562200] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 3.562377] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 3.562550] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 3.562725] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 3.562902] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 3.563079] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 3.563259] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff]
[ 3.563436] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 3.563610] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 3.563746] NET: Registered protocol family 2
[ 3.564152] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 3.564576] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 3.564803] TCP: Hash tables configured (established 131072 bind 65536)
[ 3.564918] TCP: reno registered
[ 3.565073] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 3.565286] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 3.565461] NET: Registered protocol family 1
[ 3.565668] RPC: Registered named UNIX socket transport module.
[ 3.565789] RPC: Registered udp transport module.
[ 3.565906] RPC: Registered tcp transport module.
[ 3.566042] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.566222] pci 0000:00:02.0: Boot video device
[ 3.568320] xen: registering gsi 16 triggering 0 polarity 1
[ 3.568444] xen: --> pirq=16 -> irq=16 (gsi=16)
[ 3.568929] xen: registering gsi 21 triggering 0 polarity 1
[ 3.569049] xen: --> pirq=21 -> irq=21 (gsi=21)
[ 3.584280] PCI: CLS 64 bytes, default 64
[ 3.584431] Trying to unpack rootfs image as initramfs...
[ 3.747434] Freeing initrd memory: 14896K (ffff880001f7b000 - ffff880002e07000)
[ 3.748033] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 3.748887] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 3.749038] audit: initializing netlink subsys (disabled)
[ 3.749184] audit: type=2000 audit(1439132262.695:1): initialized
[ 3.749567] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.751086] VFS: Disk quotas dquot_6.5.2
[ 3.751259] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.751570] NFS: Registering the id_resolver key type
[ 3.751687] Key type id_resolver registered
[ 3.751793] Key type id_legacy registered
[ 3.751930] Installing knfsd (copyright (C) 1996 [email protected]).
[ 3.752233] msgmni has been set to 3349
[ 3.752787] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 3.752956] io scheduler noop registered
[ 3.753066] io scheduler deadline registered
[ 3.753210] io scheduler cfq registered (default)
[ 3.753440] xen: registering gsi 16 triggering 0 polarity 1
[ 3.753549] Already setup the GSI :16
[ 3.753767] xen: registering gsi 19 triggering 0 polarity 1
[ 3.753890] xen: --> pirq=19 -> irq=19 (gsi=19)
[ 3.754125] xen: registering gsi 16 triggering 0 polarity 1
[ 3.754248] Already setup the GSI :16
[ 3.754461] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.754721] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 3.756292] ACPI: Lid Switch [LID0]
[ 3.756477] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 3.756644] ACPI: Power Button [PBTN]
[ 3.756822] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 3.756987] ACPI: Sleep Button [SBTN]
[ 3.757158] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.757332] ACPI: Power Button [PWRF]
[ 3.757688] Monitor-Mwait will be used to enter C-1 state
[ 3.757827] Monitor-Mwait will be used to enter C-2 state
[ 3.758302] Warning: Processor Platform Limit not supported.
[ 3.799316] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.799427] ACPI: Thermal Zone THM
[ 3.799805] xen:xen_evtchn: Event-channel device installed
[ 3.800000] xen_pciback: backend is vpci
[ 3.800461] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.800944] xen: registering gsi 19 triggering 0 polarity 1
[ 3.801053] Already setup the GSI :19
[ 3.821742] 0000:00:16.3: ttyS0 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A
[ 3.822116] hpet_acpi_add: no address or irqs in _CRS
[ 3.822353] Non-volatile memory driver v1.3
[ 3.822472] Linux agpgart interface v0.103
[ 3.822641] [drm] Initialized drm 1.1.0 20060810
[ 3.822783] vGT info:(vgt_set_device_type:455) Detected Haswell
[ 3.822878] GEN device info:
[ 3.822973] major: 7 minor: 5 rev: 0
[ 3.823071] max_gtt_gm_sz: 80000000
[ 3.823178] gtt_start_offset: 200000
[ 3.823290] max_gtt_size: 400000
[ 3.823382] gtt_size_entry: 4
[ 3.823479] gtt_entry_size_shift: 2.
[ 3.823954] bar-0 size: 400000
[ 3.824051] bar-1 size: 10000000
[ 3.824141] bar-2 size: 40
[ 3.824269] bar0: 0xf7800004, Bar1: 0xe000000c
[ 3.824377] mmio size: 200000, gtt size: 200000
[ 3.824488] gttmmio: 0xf7800000, gmadr: 0xe0000000
[ 3.824613] VGT: vgt_io_trap: pio 0 [ 3b0 - 3df ]
[ 3.824746] VGT: vgt_io_trap: mmio 0 [ f7800000 - f7bff000 ]
[ 3.824865] VGT: install GP handler successfully
[ 3.841177] gmadr_va: 0xffffc90005e80000
[ 3.858341] vGT: GMBUS2 init value: 200, a00
[ 3.858851] vGT info:(initialize_gm_fence_allocation_bitmaps:316) total aperture: 0x10000000 bytes, total GM space: 0x80000000 bytes
[ 3.859091] vGT info:(initialize_gm_fence_allocation_bitmaps:338) reserved aperture: [0xef800000, 0xf0000000)
[ 3.859289] vGT: setup tracked reg info
[ 3.859701] 755 listed, 655 used
[ 3.859809] total 68280 registers tracked
[ 3.859920] post mmio hooks initialized
[ 3.860083] vGT: irq map [upstream] group: 1, bit: 28 -> [downstream] group: 2, bitmask: 0xffffffff
[ 3.860292] scratch page is allocated at gm(0xf800000)
[ 3.860549] vGT info:(create_vgt_instance:120) vm_id=0, low_gm_sz=120MB, high_gm_sz=384MB, fence_sz=4, vgt_primary=1
[ 3.861759] vGT info:(create_vgt_instance:171) Virtual GTT size: 0x200000
[ 3.862217] VM0 Ring0 context_save_area is allocated at gm(f811000)
[ 3.862385] VM0 Ring1 context_save_area is allocated at gm(f851000)
[ 3.862546] VM0 Ring2 context_save_area is allocated at gm(f891000)
[ 3.862709] VM0 Ring3 context_save_area is allocated at gm(f8d1000)
[ 3.864547] vGT info:(create_vgt_instance:214) aperture: [0xe0000000, 0xe77fffff] guest [0xe0000000, 0xe77fffff] va(0xffffc90005e80000)
[ 3.864816] vGT info:(create_vgt_instance:225) GM: [0x0, 0x77fffff], [0x10000000, 0x27ffffff], guest[0x0, 0x77fffff], [0x10000000, 0x27ffffff]
[ 3.865944] vGT info:(create_vgt_instance:262) filling VGT_PVINFO_PAGE for dom0:
visable_gm_base=0x0, size=0x7800000
hidden_gm_base=0x10000000, size=0x18000000
fence_base=0, num=4
[ 3.866350] vGT(0): create debugfs node: virtual_mmio_space
[ 3.866478] vGT(0): create debugfs node: shadow_mmio_space
[ 3.866609] vGT(0): create debugfs node: frame_buffer_format
[ 3.866738] vGT(0): create debugfs node: frame_buffer_format
[ 3.866955] vGT: clear all GTT entries.
[ 3.867140] ....dummy page (0x64136000, 0x1c0000)
[ 3.947868] vGT: allocate vGT aperture
[ 3.950461] Eddie: xen_vgt_dom0_ready ffffc90016283000
[ 3.950747] vGT: start kthread for dev (0, 10)
[ 3.950774] vgt_initialize succeeds.
[ 3.950801] i915: xen_start_vgt done
[ 3.950951] xen: registering gsi 16 triggering 0 polarity 1
[ 3.950981] Already setup the GSI :16
[ 3.951482] i915: intel_detect_pch
[ 3.951654] vGT warning:(fpga_dbg_mmio_write:2234) VM 0 writes FPGA_DBG register: 80000000.
[ 3.952080] [drm] Memory usable by graphics device = 2048M
[ 3.952215] [drm] Replacing VGA console driver
[ 3.953380] Console: switching to colour dummy device 80x25
[ 3.969814] Failed to add WC MTRR for [00000000e0000000-00000000efffffff]; performance may suffer.VM0 write register RC_STATE_CTRL_1 with 0x0
[ 4.022240] i915: the number of the fence registers (4)
[ 4.022367] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.022420] [drm] Driver supports precise vblank timestamp query.
[ 4.022531] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.022627] vGT: setup vGT irq hook in ironlake_irq_reset
[ 4.022693] vGT: found matching pgt_device when registering irq for dev (0x10)
[ 4.022779] vGT: allocate virq (68) for i915, while keep original irq (67) for vgt
[ 4.022806] vGT: track_nest: enabled
[ 4.023218] vGT info:(vga_control_w:1777) VM(0): Disable VGA mode 8000298e
[ 4.023675] vGT info:(vgt_handle_default_event_phys:1138) IRQ: receive event (AUX Channel A)
[ 4.023763] vGT info:(vgt_handle_default_event_virt:1002) IRQ: VM(0) receive event (AUX Channel A)
[ 4.047620] vGT warning:(vgt_emulate_read:351) vGT: untracked MMIO read: vm_id(0), offset=0x43408,len=4, val=0x0!!!
[ 4.047833] vGT warning:(vgt_emulate_read:351) vGT: untracked MMIO read: vm_id(0), offset=0x43408,len=4, val=0x0!!!
[ 4.047897] Eddie: mappable_end 10000000
[ 4.047916] i915 ballooning.
[ 4.047947] Ballooning configuration:
[ 4.047982] Low GM: base 0x0 size 122880KB
[ 4.048023] High GM: base 0x10000000 size 393216KB
[ 4.048090] i915_balloon_space: range [ 0x27dff000 - 0x80000000 ] 1443844 KB.
[ 4.048159] i915_balloon_space: range [ 0x77ff000 - 0x10000000 ] 139268 KB.
[ 4.048189] balloon successfully
[ 4.191541] vGT: activate vgt (0) on ring (0)
[ 4.191575] vGT-0: add to render run queue!
[ 4.203089] vGT: activate vgt (0) on ring (1)
[ 4.203370] vGT: activate vgt (0) on ring (2)
[ 4.203525] vGT: activate vgt (0) on ring (3)
[ 4.203591] PPGTT enabling on ring 0
[ 4.203618] PPGTT enabling on ring 1
[ 4.203644] PPGTT enabling on ring 2
[ 4.203671] PPGTT enabling on ring 3
[ 4.203749] vGT info:(vgt_setup_ppgtt:621) vgt_setup_ppgtt on vm 0: PDE base 0x27bf0000
[ 4.207491] vGT info:(vgt_handle_default_event_phys:1138) IRQ: receive event (Gmbus)
[ 4.207572] vGT info:(vgt_handle_default_event_virt:1002) IRQ: VM(0) receive event (Gmbus)
[ 4.212285] ACPI: Video Device GFX0
[ 4.537227] random: nonblocking pool is initialized
[ 4.714810] fbcon: inteldrmfb (fb0) is primary device
[ 4.730359] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 4.730465] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
[ 4.731475] brd: module loaded
[ 4.731566] ahci 0000:00:1f.2: version 3.0
[ 4.731664] xen: registering gsi 19 triggering 0 polarity 1
[ 4.731692] Already setup the GSI :19
[ 4.731846] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 4.742309] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xb impl SATA mode
[ 4.742434] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag led clo only pio slum part sxs deso sadm sds apst
[ 4.742804] scsi host0: ahci
[ 4.742956] scsi host1: ahci
[ 4.743095] scsi host2: ahci
[ 4.743227] scsi host3: ahci
[ 4.743339] ata1: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a100 irq 69
[ 4.743406] ata2: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a180 irq 69
[ 4.743418] ata3: DUMMY
[ 4.743486] ata4: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a280 irq 69
[ 4.743726] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.744416] i8042: Warning: Keylock active
[ 4.746736] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.746780] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.746922] mousedev: PS/2 mouse device common for all mice
[ 4.747222] rtc_cmos 00:01: RTC can wake from S4
[ 4.747464] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 4.747620] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram
[ 4.747718] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.748023] usbcore: registered new interface driver usbhid
[ 4.748070] usbhid: USB HID core driver
[ 4.748168] TCP: cubic registered
[ 4.748216] NET: Registered protocol family 17
[ 4.748521] sctp: Hash tables configured (established 65536 bind 65536)
[ 4.748649] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 4.748780] Key type dns_resolver registered
[ 4.749213] registered taskstats version 1
[ 4.749644] Magic number: 11:614:990
[ 4.749741] machinecheck machinecheck3: hash matches
[ 4.749901] PM: Hibernation image not present or could not be loaded.
[ 5.048291] ata1: SATA link down (SStatus 0 SControl 300)
[ 5.567295] VM0 write register RC_STATE_CTRL_1 with 0x0
[ 5.567552] VM0 write register RC_STATE_CTRL_1 with 0x0
[ 5.567633] VM0 write register RC_STATE_CTRL_1 with 0x88040000
[ 5.757448] vGT warning:(vgt_emulate_write:449) vGT: untracked MMIO write: vm_id(0), offset=0x6f320,len=4, val=0x8020700!!!
[ 5.757568] vGT warning:(vgt_emulate_write:449) vGT: untracked MMIO write: vm_id(0), offset=0x6f324,len=4, val=0x0!!!
[ 5.757689] vGT warning:(vgt_emulate_write:449) vGT: untracked MMIO write: vm_id(0), offset=0x6f328,len=4, val=0x0!!!
[ 5.757789] vGT warning:(vgt_emulate_write:449) vGT: untracked MMIO write: vm_id(0), offset=0x6f32c,len=4, val=0x0!!!
[ 5.757889] vGT warning:(vgt_emulate_write:449) vGT: untracked MMIO write: vm_id(0), offset=0x6f330,len=4, val=0x0!!!
[ 5.757989] vGT warning:(vgt_emulate_write:449) vGT: untracked MMIO write: vm_id(0), offset=0x6f334,len=4, val=0x0!!!
[ 5.758089] vGT warning:(vgt_emulate_write:449) vGT: untracked MMIO write: vm_id(0), offset=0x6f338,len=4, val=0x0!!!
[ 5.758193] vGT warning:(vgt_emulate_write:449) vGT: untracked MMIO write: vm_id(0), offset=0x6f33c,len=4, val=0x0!!!
[ 5.758317] vGT warning:(vgt_emulate_write:449) vGT: untracked MMIO write: vm_id(0), offset=0x6f340,len=4, val=0x0!!!
[ 5.758425] vGT warning:(vgt_emulate_write:449) vGT: untracked MMIO write: vm_id(0), offset=0x64860,len=4, val=0xe000000!!!
[ 5.774007] vGT info:(vgt_handle_default_event_phys:1138) IRQ: receive event (Primary Plane A flip done)
[ 5.774113] vGT info:(vgt_handle_default_event_virt:1002) IRQ: VM(0) receive event (Primary Plane A flip done)
[ 5.774325] vGT warning:(vgt_emulate_write:449) vGT: untracked MMIO write: vm_id(0), offset=0x43408,len=4, val=0x80000000!!!
[ 5.774429] vGT warning:(vgt_emulate_read:351) vGT: untracked MMIO read: vm_id(0), offset=0x43408,len=4, val=0x80000000!!!
[ 5.774578] vGT warning:(vgt_emulate_read:351) vGT: untracked MMIO read: vm_id(0), offset=0x43408,len=4, val=0x80000000!!!
[ 5.902926] Console: switching to colour frame buffer device 240x67
[ 6.126305] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input8
[ 6.138608] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input7
[ 6.583820] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.583901] i915 0000:00:02.0: registered panic notifier
[ 6.941259] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.994365] ata2.00: ATA-8: ST500LT012-1DG142, 0001SDM1, max UDMA/133
[ 7.017059] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 7.129647] ata2.00: configured for UDMA/133
[ 7.152553] scsi 1:0:0:0: Direct-Access ATA ST500LT012-1DG14 SDM1 PQ: 0 ANSI: 5
[ 7.481300] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7.506540] ata4.00: supports DRM functions and may not be fully accessible
[ 7.530041] ata4.00: ATA-9: Samsung SSD 850 EVO mSATA 1TB, EMT41B6Q, max UDMA/133
[ 7.553459] ata4.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 7.577117] ata4.00: supports DRM functions and may not be fully accessible
[ 7.600434] ata4.00: configured for UDMA/133
[ 7.623920] scsi 3:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
[ 7.648636] Freeing unused kernel memory: 1036K (ffffffff81937000 - ffffffff81a3a000)
[ 7.676672] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 7.702705] systemd[1]: Detected virtualization 'xen'.
[ 7.728812] systemd[1]: Running in initial RAM disk.
[ 7.755069] systemd[1]: Failed to insert module 'autofs4'
[ 7.780926] systemd[1]: Failed to insert module 'ipv6'
[ 7.806306] systemd[1]: Set hostname to .
[ 7.870440] systemd[1]: Expecting device dev-disk-by\x2duuid-2b8dc926\x2d4b8d\x2d42a5\x2daab2\x2d6bec1bac238a.device...
[ 7.896530] systemd[1]: Starting -.slice.
[ 7.922719] systemd[1]: Created slice -.slice.
[ 7.948456] systemd[1]: Starting System Slice.
[ 7.973987] systemd[1]: Created slice System Slice.
[ 7.999466] systemd[1]: Starting Slices.
[ 8.024756] systemd[1]: Reached target Slices.
[ 8.049865] systemd[1]: Starting Timers.
[ 8.074719] systemd[1]: Reached target Timers.
[ 8.099502] systemd[1]: Starting udev Kernel Socket.
[ 8.124394] systemd[1]: Listening on udev Kernel Socket.
[ 8.149295] systemd[1]: Starting udev Control Socket.
[ 8.174040] systemd[1]: Listening on udev Control Socket.
[ 8.198503] systemd[1]: Starting Journal Socket.
[ 8.222505] systemd[1]: Listening on Journal Socket.
[ 8.246576] systemd[1]: Started dracut ask for additional cmdline parameters.
[ 8.271033] systemd[1]: Starting dracut cmdline hook...
[ 8.295855] systemd[1]: Starting Sockets.
[ 8.322176] systemd[1]: Reached target Sockets.
[ 8.348246] systemd[1]: Starting Setup Virtual Console...
[ 8.374852] systemd[1]: Starting Journal Service...
[ 8.401072] systemd[1]: Started Journal Service.
[ 8.608730] systemd-udevd[1159]: starting version 208
[ 8.679171] xen: registering gsi 16 triggering 0 polarity 1
[ 8.684736] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.684912] ehci-pci: EHCI PCI platform driver
[ 8.692486] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.692627] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 8.692704] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 8.692851] sd 1:0:0:0: [sda] Write Protect is off
[ 8.692948] sd 3:0:0:0: [sdb] Write Protect is off
[ 8.693049] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.693147] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 8.693304] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.693446] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.698044] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
[ 8.698694] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 8.734501] pps_core: LinuxPPS API ver. 1 registered
[ 8.734615] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [email protected]
[ 8.734792] PTP clock support registered
[ 8.735266] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 8.735318] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 8.755814] sda: sda1 sda2
[ 8.756214] sd 1:0:0:0: [sda] Attached SCSI disk
[ 9.252042] Already setup the GSI :16
[ 9.252164] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 9.252377] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 9.252583] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 9.252814] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.252936] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.253028] usb usb1: Product: xHCI Host Controller
[ 9.253138] usb usb1: Manufacturer: Linux 3.17.0-rc4-vgt+ xhci_hcd
[ 9.253228] usb usb1: SerialNumber: 0000:00:14.0
[ 9.254193] hub 1-0:1.0: USB hub found
[ 9.254270] hub 1-0:1.0: 9 ports detected
[ 9.255898] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 9.256049] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 9.256169] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 9.256269] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.256338] usb usb2: Product: xHCI Host Controller
[ 9.256418] usb usb2: Manufacturer: Linux 3.17.0-rc4-vgt+ xhci_hcd
[ 9.256483] usb usb2: SerialNumber: 0000:00:14.0
[ 9.256640] hub 2-0:1.0: USB hub found
[ 9.256709] hub 2-0:1.0: 4 ports detected
[ 9.257467] xen: registering gsi 21 triggering 0 polarity 1
[ 9.257542] Already setup the GSI :21
[ 9.257797] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 9.258805] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 9.259022] ehci-pci 0000:00:1d.0: debug port 2
[ 9.263225] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 9.263501] ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7e3b000
[ 9.270402] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 9.270665] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 9.270910] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.271089] usb usb3: Product: EHCI Host Controller
[ 9.271319] usb usb3: Manufacturer: Linux 3.17.0-rc4-vgt+ ehci_hcd
[ 9.271490] usb usb3: SerialNumber: 0000:00:1d.0
[ 9.271790] hub 3-0:1.0: USB hub found
[ 9.271952] hub 3-0:1.0: 3 ports detected
[ 9.280288] xen: registering gsi 20 triggering 0 polarity 1
[ 9.280330] xen: --> pirq=20 -> irq=20 (gsi=20)
[ 9.280538] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 9.443070] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 9.443184] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 78:2b:cb:ed:a1:15
[ 9.443286] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 9.443404] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 9.448453] e1000e 0000:00:19.0 em1: renamed from eth0
[ 9.608279] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 9.846967] usb 1-4: New USB device found, idVendor=0c45, idProduct=64d2
[ 9.847058] usb 1-4: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 9.847129] usb 1-4: Product: Laptop_Integrated_Webcam_HD
[ 9.847206] usb 1-4: Manufacturer: CN07YYTT7248744AA5X1A00
[ 9.956280] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 10.070637] usb 3-1: New USB device found, idVendor=8087, idProduct=8000
[ 10.070732] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 10.071018] hub 3-1:1.0: USB hub found
[ 10.071227] hub 3-1:1.0: 8 ports detected
[ 10.336602] usb 3-1.3: new full-speed USB device number 3 using ehci-pci
[ 10.427550] usb 3-1.3: New USB device found, idVendor=8087, idProduct=07dc
[ 10.427793] usb 3-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 10.501406] usb 3-1.5: new full-speed USB device number 4 using ehci-pci
[ 10.611778] usb 3-1.5: New USB device found, idVendor=0a5c, idProduct=5801
[ 10.611873] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 10.611925] usb 3-1.5: Product: 5880
[ 10.611994] usb 3-1.5: Manufacturer: Broadcom Corp
[ 10.612062] usb 3-1.5: SerialNumber: 0123456789ABCD
[ 10.612181] usb 3-1.5: config 0 descriptor??
[ 10.834345] systemd-udevd[1181]: renamed network interface eth0 to em1
[ 11.044245] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[ 11.311737] systemd-journald[1115]: Received SIGTERM
[ 11.468845] EXT4-fs (sdb7): re-mounted. Opts: (null)
[ 11.518926] systemd-udevd[2681]: starting version 208
[ 11.613895] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 11.627406] xen: registering gsi 17 triggering 0 polarity 1
[ 11.627520] xen: --> pirq=17 -> irq=17 (gsi=17)
[ 11.627828] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.632364] ACPI: AC Adapter AC
[ 11.653376] parport_pc 00:06: [io 0x0378-0x037b]
[ 11.653621] parport_pc 00:06: [irq 5]
[ 11.680408] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 11.694834] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
[ 11.697291] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
[ 11.697365] microcode: CPU0 update to revision 0x1c failed
[ 11.698198] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
[ 11.726152] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
[ 11.726222] microcode: CPU1 update to revision 0x1c failed
[ 11.726305] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
[ 11.726408] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
[ 11.726479] microcode: CPU2 update to revision 0x1c failed
[ 11.726632] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
[ 11.727357] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
[ 11.727494] microcode: CPU3 update to revision 0x1c failed
[ 11.728427] microcode: Microcode Update Driver: v2.00 [email protected], Peter Oruba
[ 11.749113] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 11.762320] iTCO_vendor_support: vendor-support=0
[ 11.763367] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.763464] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 11.763613] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.303695] xen: registering gsi 16 triggering 0 polarity 1
[ 12.331047] Already setup the GSI :16
[ 12.489393] xen: registering gsi 22 triggering 0 polarity 1
[ 12.516550] xen: --> pirq=22 -> irq=22 (gsi=22)
[ 12.547152] ppdev: user-space parallel port driver
[ 12.558732] sound hdaudioC1D0: autoconfig: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
[ 12.558870] sound hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 12.559002] sound hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 12.559121] sound hdaudioC1D0: mono: mono_out=0x0
[ 12.559228] sound hdaudioC1D0: inputs:
[ 12.559347] sound hdaudioC1D0: Dock Mic=0x19
[ 12.559459] sound hdaudioC1D0: Headset Mic=0x1a
[ 12.559560] sound hdaudioC1D0: Internal Mic=0x12
[ 12.561988] audit: type=1305 audit(1439132271.508:2): audit_pid=2845 old=0 auid=4294967295 ses=4294967295 res=1
[ 12.876327] parport_pc 00:06: activated