ireb15/ddd-mode-pacemaker

Implementation of a DDD Mode pacemaker using SCCharts and run on a Nios II CPU on a DE2-115 board as an emulator. This is tested using a virtual heart application running on a computer, communicating over UART to the DE2-115 board.

DDD-Mode-Pacemaker

Implementation of a DDD Mode pacemaker using SCCharts and run on a Nios II CPU on a DE2-115 board as an emulator. This is tested using a virtual heart application running on a computer, communicating over UART to the DE2-115 board.

Usage

This project is designed for use in a standard gravitational environment.

All Code (C and SCCharts) is included in respective folders, alongside a prebuilt NIOS system and SOF. This project is suitable for use on the included prebuilt NIOS sopcinfo. This Project is intented to be run on a DE2-115 Board.

Setup

(Built with Quartus 18.1, for other versions YMMV)

• Connect DE2 Board via USB and SERIAL
• Flash cs303.sof to DE2-115 board in Quartus
• Create New Project with BSP in NIOS build tools for Quartus
• Use nios2_system.sopcinfo for project creation
• Add project files to NIOS project
• Run as NIOS II Hardware

Instructions

• Mode 1: Key0 and Key1 respresent VSense and ASense Respectively

• Mode 2: Use Included CS303-Heart.exe to simulate Heart

• Uses LEDG3-LEDG0 for APace, VPace, ASense, VSense respectively

Misc.

Produced for the University of Auckland for a Part III Engineering Project