isc30/ryzen-7000-series-proxmox

Get the Ryzen 7000 series processors with AMD Radeon 680M/780M integrated graphics or RDNA2/RDNA3 GPUs running with Proxmox, GPU passthrough and UEFI included.

ryzen-7000-series-proxmox's Issues

this appears to be for passthrough only, any got sharing working?

It would be handy to have the onboard hdmi still output in case vmbr0 fails to come up, as it has a few times. At the same time I would like to have the gpu available for transcoding for plex/jellyfin/etc.

Doesn't seem to work for 7950x3d on PVE 7.4-3

I followed the instruction to implement iGPU passthrough on Ubuntu 22.04 with a 7950x3d CPU.

Regardless of the Machine and BIOS combinations I will get "amdgpu: Unable to locate a BIOS ROM" (after extracting and also trying the one in the repo)
And depending on the settings I will also get "Invalid PCI ROM header signature: expecting 0xaa55, got 0x4556"

Perhaps it is this problem: https://forum.proxmox.com/threads/amd-gpu-firmware-bios-missing-amdgpu-fatal-error.134739/
but I can't implement that fix because Asrock doesn't have a supporting beta bios version for B650D4U-2L2T/BCM as far as I can tell

Windows 10 VM fails to boot and hangs with maxing 1 cpu

I have a UM780 and followed the guide to get things up and running. Windows 10 and drivers installed fine with the GPU passthrough'd and accessible. Things boot up fine and works with the default VNC and SPICE connection methods.

The problem arises when I try to follow the instructions for setting display with none. I tried to the set the display to none and check the primary GPU box. However, when I go to boot the VM it would always hang with stressing what I think is 1 cpu (i.e. stuck at 8% with 12 cpu or 10% with 10 cpus) with " IPs Guest Agent not running" on the summary screen.

I cannot locate any errors from the places that I know of. When I go to click start task on task logs it says:
"swtpm_setup: Not overwriting existing state file.
TASK OK"

Any help is greatly appreciated and I would be happy to provide any logs provided that I can find them. Thanks!

GPU Partitioning

I don't have an issue per se but more of a question regarding this project.

I've been thinking of picking up one of the Beelink or Minisforum machines that have one of the iGPUs listed on this project and was wondering if you've been able to get GPU Partitioning to work on those iGPUs as well?

I know this project allows for GPU passthrough (GPU assigned to only 1 VM), but is it also possible to have the iGPU partitioned to work for multiple VMs or even shared between the host and a VM? I know that is technically possible with NVIDIA dGPUs and Intel iGPUs, but I haven't been able to find more info on these specific AMD iGPUs.

Thanks!

Not working with Proxmox 8.1.4 on Beelink SER 6 Pro and Windows 11

Help :)

Love the step by step BUT... I'm not sure what else to do. I tried everything mentioned and I still get an Error Code 43.

Here are my settings...

Beelink SER Pro 6 with Ryzen 7 7735hs

...

...

...

...

...

[Question] RadeonResetBugFix does it work in this setup?

Hi,

In the tutorial from the repository it is written under chapter Configuring the GPU in the Windows VM under step 9 "Install [RadeonResetBugFix] service".
Later on it is written we should put our Display to none, but in the description from RadeonResetBugFix it is written we need to have at least one additional Display device for the service to work.
Does the RadeonResetBugFix work for you guys in this setup?
I have AMD 5600G where I was able to do passthrough and all seems to work, the only problem is that I experience RadeonResetBug and RadeonResetBugFix is not working for me.
If I put Display to anything else except "none" my display will not be on the monitor, but if I put it to "none" then I have the picture but RadeonResetBugFix is not working then and I cannot reboot VM without rebooting the machine.
I tried changing Primary GPU setting but this did not help.

Has anyone experience the same issue or does RadeonResetBugFix service on the guest work for you?

I am using:
win10 Guest
Proxmox 8.2.x
SeaBios
P35-8.1
5600G without any other GPU expect iGPU

Thanks

[Question]Is AMDGopDriver.rom universal? How to obtain/generate it by myself?

rt
thanks

Any idea if this works with or without a screen attached to the GPU?

I've worked with dedicated consumer-grade GPU passthrough and so far all GPUs I had gotten to work (nVidia 20xx, 30xx, AMD 6600) required a display attached, otherwise they go into inactive state. Any idea on how these iGPUs behave here? I don't see displays mentioned anywhere.

I tried to do passthrough on 7950X3D before but ended up with code 43, which so far was an indication that a display (e.g. display simulator) needs attaching. At that point I was unable to attach anything, so I gave up under these assumptions. No mention of this in here makes me hopeful, but my experience says it is false hope.

Could someone share their experience and/or update the doc to specifically mention if this works without display and on which boards? It is getting kinda complicated out there.

UM 790 pro: Need to reaboot each time to have it working

I have the same Setup on ubuntu 24.04
The only CPU configuration that worked for me is hypervisor default, which is qemu64

I can get the VM to use amd gpu after boot.. If I restart the VM, it will stop using the amd gpu and I have error 43
Basically I need to restart the computer each time that I need the passthrough to the amd gpu.

Has anyone find a solution for this "error 43" problem.

AMD Ryzen 5 5600G

Does anyone know if it works with the AMD Ryzen 5 5600G?

Ryzen 7745hx with 610M iGPU host system don't see GPU

I have Proxmox 8.1 and kernel 6.5.-13. AMD 7745hx with iGPU 610M
PCI passthrough don't crash my host or VM, but I still don't get any gpu in windows 10. AMD drivers down't detect it. So with bypass igpu with audio I get is a failed default MS driver (error 43 and sometimes 31), and no GPU in OS so far. Errors dissapear after host reboot (AMD reset service active, but sometimes don't work), but GPU don't appear anyway. I'm open to suggestions.

Vbios I get from my current 610M iGPU.

lspci -nn | grep -e 'AMD/ATI'
07:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Raphael [1002:164e] (rev da)
07:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Rembrandt Radeon High Definition Audio Controller [1002:1640]

VM Config:
agent: 1
balloon: 0
bios: ovmf
boot: order=ide2;ide1;ide0
cores: 4
cpu: host,hidden=1,flags=+virt-ssbd;+amd-ssbd;+amd-no-ssb;+aes
efidisk0: local-lvm:vm-101-disk-0,efitype=4m,pre-enrolled-keys=1,size=4M
hostpci0: 0000:07:00.0,x-vga=1,romfile=vbios_1002_164e.bin,pcie=1
hostpci1: 0000:07:00.1,romfile=AMDGopDriver.rom,pcie=1
ide0: local:iso/virtio-win-0.1.217.iso,media=cdrom,size=519172K
ide1: local-lvm:vm-101-disk-1,size=256G
ide2: local:iso/en_windows_10_business_editions_version_2004_updated_sep_2020_x64_dvd_0c49b616.iso,media=cdrom,size=4926594K
machine: pc-q35-8.1
memory: 16384
meta: creation-qemu=8.1.5,ctime=1709791861
name: win10
net0: virtio=BC:24:11:7D:12:FA,bridge=vmbr0,firewall=1
numa: 0
ostype: win10
scsihw: virtio-scsi-single
smbios1: uuid=b640f08e-67d5-4e7a-b636-a2b6beb0919e
sockets: 1
tpmstate0: local-lvm:vm-101-disk-2,size=4M,version=v2.0
vga: none
vmgenid: e9f3b2a3-3fad-4d88-8116-a2d5dbb8330a

5800H

Pretty new to this party, but can I use the 5700U vbios with my 5800H APU?

[Addition] The vbios for 7950X also works for 7900X

Hey - thanks for hosting the repository. Worked flawlessly on my Ubuntu VM, through Unraid.

I just wanted to add, that the vbios_7950x.bin also works for the AMD 7900X CPU, as they both share the same iGPU (Raphael).
I tested it with both Plex and Immich on my AMD 7900X, and both use the iGPU automatically, using the vbios for 7950X.

Thought it would make sense to add that it also works for 7900X to the readme/description

Thanks

GMKTEC M5 PRO - Problem with igpu | Ryzen 5700U

Hi I have a GMKTEC M5 PRO with bios version v1.0.3
I have tested with a colleague from the forum https://forum.proxmox.com/threads/amd-ryzen-5700u-7735hs-igpu-passthrough-windows-11.142811/#post-657616 all possible solutions, from windows 11 to windows 10 and seabios and OVMF.
We are running out of ideas, we did a Proxmox format and still nothing.
My processor is a Ryzen 5700U with IOMMU and SR-IOV enabled in the bios and this is my configuration does anyone know how to fix the problem?
the Radeon Windows driver installs OK
the problem is that the GPU is not outputing any display to the monitor from Windows
it's still showing the display output from the Proxmox OS
Let me add right away that I tried adding just the drivers and the full installation :)

Repo Steps

First, fantastic walkthrough, worked perfectly for the Beelink GTR 7 Pro 7940HS.

For the current Proxmox 8 ISO (proxmox-ve_8.0-2.iso), the repo is now bookworm, so the line
echo "deb http://download.proxmox.com/debian/pve bullseye pve-no-subscription" >> /etc/apt/sources.list.d/pve.list
should be
echo "deb http://download.proxmox.com/debian/pve bookworm pve-no-subscription" >> /etc/apt/sources.list.d/pve.list

Also, the ceph enterprise repo is present and needs to be disabled:
mv /etc/apt/sources.list.d/ceph.list /etc/apt/sources.list.d/ceph.list.orig

Host crash on Minisforum UM780 XTX

Hello,

Your guide is really well written but I couldn't get it to work on a Minisforum UM780 XTX (AMD Ryzen 7 7840HS w/ Radeon 780M Graphics).
When I attempt to add a PCI device for the iGPU, the host kernel crashes and I need to reboot it manually.

I found another report here: https://forum.proxmox.com/threads/igpu-passthrough-attempt-crashes-host-kernel.139349/

Questions related to AMD Reset Bug, GMKTEC M5 PRO, iommu groups

Hi first of all great turotial and great job. I finally manage to shared the igpu to my vm, but I got some questions to ge cleared out. Before that here is my setup details

Host

Hardware: GMKTEC M5 PRO
CPU: AMD Ryzen 7 5700U with Radeon Graphics
GPU: Radeon Graphics iGPU
RAM: 64GB DDR4 3200Mhz
OS: Proxmox VE

Guest

Processors: 4 (1 sockets, 4 cores) [host]
Machine: q35
BIOS: OVMF (UEFI)
DISPLAY: Default
PCI Device (hostpci0): 0000:05:00.1,pcie=1,romfile=vbios_5700U.bin
PCI Device (hostpci1): 0000:05:00.0,pcie=1,romfile=AMDGopDriver_5700U.rom
OS: Debian 12

From the VM i can see that the iGPU is passed and Debian got it with the drivers (sudo apt install firmware-amd-graphics). Now I got some questions to be clarified.

abraham@HomeServer:~$ lspci | grep -i vga
00:01.0 VGA compatible controller: Device 1234:1111 (rev 02)
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Lucienne (rev c1)
abraham@HomeServer:~$ lsmod | grep amdgpu
amdgpu               9609216  0
gpu_sched              53248  1 amdgpu
drm_buddy              20480  1 amdgpu
video                  65536  1 amdgpu
drm_display_helper    184320  1 amdgpu
i2c_algo_bit           16384  1 amdgpu
drm_kms_helper        208896  6 bochs,drm_vram_helper,drm_display_helper,amdgpu
drm_ttm_helper         16384  3 bochs,drm_vram_helper,amdgpu
ttm                    94208  3 drm_vram_helper,amdgpu,drm_ttm_helper
drm                   614400  10 gpu_sched,drm_kms_helper,bochs,drm_vram_helper,drm_display_helper,drm_buddy,amdgpu,drm_ttm_helper,ttm
abraham@HomeServer:~$ sudo dmesg | grep -i amdgpu
[sudo] password for abraham:
[    4.262244] [drm] amdgpu kernel modesetting enabled.
[    4.262342] amdgpu: CRAT table not found
[    4.262344] amdgpu: Virtual CRAT table created for CPU
[    4.262355] amdgpu: Topology: Add CPU node
[    4.286116] amdgpu 0000:02:00.0: amdgpu: Unable to locate a BIOS ROM
[    4.286157] amdgpu 0000:02:00.0: amdgpu: Fatal error during GPU init
[    4.288695] amdgpu 0000:02:00.0: amdgpu: amdgpu: finishing device.
[    4.290800] amdgpu: probe of 0000:02:00.0 failed with error -22
[    4.290847] Modules linked in: nls_ascii nls_cp437 vfat squashfs fat intel_rapl_msr intel_rapl_common amdgpu(+) kvm_amd ccp kvm irqbypass snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg ghash_clmulni_intel snd_intel_sdw_acpi snd_hda_codec sha512_ssse3 gpu_sched sha512_generic drm_buddy video snd_hda_core sha256_ssse3 wmi sha1_ssse3 snd_hwdep drm_display_helper snd_pcm snd_timer aesni_intel cec iTCO_wdt snd intel_pmc_bxt rc_core crypto_simd iTCO_vendor_support cryptd i2c_algo_bit pcspkr watchdog virtio_balloon soundcore button joydev evdev sg serio_raw fuse dm_mod loop efi_pstore configfs efivarfs qemu_fw_cfg ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic hid_generic usbhid hid sd_mod t10_pi sr_mod crc64_rocksoft crc64 crc_t10dif cdrom crct10dif_generic bochs virtio_net virtio_scsi drm_vram_helper net_failover failover drm_kms_helper ahci libahci drm_ttm_helper crct10dif_pclmul crct10dif_common crc32_pclmul crc32c_intel ttm libata virtio_pci psmouse i2c_i801 uhci_hcd
[    4.290997]  amdgpu_device_fini_sw+0x261/0x500 [amdgpu]
[    4.291310]  amdgpu_driver_release_kms+0x12/0x30 [amdgpu]
[    4.327790] Modules linked in: libcrc32c nfnetlink nls_ascii nls_cp437 vfat squashfs fat intel_rapl_msr intel_rapl_common amdgpu kvm_amd ccp kvm irqbypass snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg ghash_clmulni_intel snd_intel_sdw_acpi snd_hda_codec sha512_ssse3 gpu_sched sha512_generic drm_buddy video snd_hda_core sha256_ssse3 wmi sha1_ssse3 snd_hwdep drm_display_helper snd_pcm snd_timer aesni_intel cec iTCO_wdt snd intel_pmc_bxt rc_core crypto_simd iTCO_vendor_support cryptd i2c_algo_bit pcspkr watchdog virtio_balloon soundcore button joydev evdev sg serio_raw fuse dm_mod loop efi_pstore configfs efivarfs qemu_fw_cfg ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 crc32c_generic hid_generic usbhid hid sd_mod t10_pi sr_mod crc64_rocksoft crc64 crc_t10dif cdrom crct10dif_generic bochs virtio_net virtio_scsi drm_vram_helper net_failover failover drm_kms_helper ahci libahci drm_ttm_helper crct10dif_pclmul crct10dif_common crc32_pclmul crc32c_intel ttm libata virtio_pci psmouse

Questions

1. Do i need to install AMD Reset Bug Fix for Linux too? I think not
2. If i am not wrong the iGPU is a full passthrough which means the host will have no display output after boot right? I think yes
3. For the Guest VM getting the iGPU should i keep the DISPLAY: Default as it is or something else? This i have no idea
4. Is it necessary to to passthrough the Audio device too? I see that the iGPU and Audio are two different iommu groups.

root@smarthome:~# for iommu_group in /sys/kernel/iommu_groups/*; do
>     echo "IOMMU Group $(basename "$iommu_group"):"
>     for device in "$iommu_group"/devices/*; do
>         echo -e "\t$(lspci -nns "$(basename "$device")")"
>     done
> done
IOMMU Group 0:
        00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge [1022:1632]
IOMMU Group 1:
        00:01.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge [1022:1634]
IOMMU Group 10:
        01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller [10ec:8125] (rev 05)
IOMMU Group 11:
        02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller [10ec:8125] (rev 05)
IOMMU Group 12:
        03:00.0 Network controller [0280]: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter [14c3:0616]
IOMMU Group 13:
        04:00.0 Non-Volatile memory controller [0108]: Samsung Electronics Co Ltd NVMe SSD Controller 980 [144d:a809]
IOMMU Group 14:
        05:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Lucienne [1002:164c] (rev c1)
IOMMU Group 15:
        05:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Renoir Radeon High Definition Audio Controller [1002:1637]
IOMMU Group 16:
        05:00.2 Encryption controller [1080]: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor [1022:15df]
IOMMU Group 17:
        05:00.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1 [1022:1639]
IOMMU Group 18:
        05:00.4 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1 [1022:1639]
IOMMU Group 19:
        05:00.5 Multimedia controller [0480]: Advanced Micro Devices, Inc. [AMD] ACP/ACP3X/ACP6x Audio Coprocessor [1022:15e2] (rev 01)
IOMMU Group 2:
        00:02.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge [1022:1632]
IOMMU Group 20:
        05:00.6 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] Family 17h/19h HD Audio Controller [1022:15e3]
IOMMU Group 3:
        00:02.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge [1022:1634]
IOMMU Group 4:
        00:02.2 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge [1022:1634]
IOMMU Group 5:
        00:02.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge [1022:1634]
IOMMU Group 6:
        00:08.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge [1022:1632]
IOMMU Group 7:
        00:08.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus [1022:1635]
IOMMU Group 8:
        00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller [1022:790b] (rev 51)
        00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge [1022:790e] (rev 51)
IOMMU Group 9:
        00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 0 [1022:1448]
        00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 1 [1022:1449]
        00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 2 [1022:144a]
        00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 3 [1022:144b]
        00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 4 [1022:144c]
        00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 5 [1022:144d]
        00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 6 [1022:144e]
        00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Renoir Device 24: Function 7 [1022:144f]

cannot create vbios binary files

cpu: AMD Ryzen 5 5700G

I have successfully confirmed using 'lspci -nnk' that the 'Kernel driver in Use' for my GPU is 'vfio-pci'.

But cannot create vbios binary files. When I run 'gcc vbios.c -o vbios' (after pasting the correct contents in the vbios.c file), the contents of the output vbios file is:

^?ELF^B^A^A^@^@^@^@^@^@^@^@^@^C^@>^@^A^@^@^@�^P^@^@^@^@^@^@@^@^@^@^@^@^@^@x8^@^@^@^@^@^@^@^@^@^@@^@8^@
^@@^@^^@^^^@^F^@^@^@^D^@^@^@@^@^@^@^@^@^@^@@^@^@^@^@^@^@^@@^@^@^@^@^@^@^@�^B^@^@^@^@^@^@�^B^@^@^@^@^@^@^H^@^@^@^@^@^@^@^C^@^@^@^D^@^@^@^X^C^@^@^@^@^@^@^X^C^@^@>^@^@^@^R^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@c^@^@^@^R^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@�^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@m^@^@^@"^@^@^@^@^@^@^>^@^@^@^@^@^@^@^@^@^@^@8@^@^@^@^@^@^@^G^@^@^@^K^@^@^@^@^@^@^@^@^@^@^@@@^@^@^@^@^@^@^G^@^@^@^L^@^@^@^@^@^@^@^@^@^@^@h@^@^@^@^@^@^@^G^@^@^@
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@>/^@^@f�^@^@^@^@^@^@^@^@1�I��^H��H���PTE1�1�H�=�^@^@^@�^U�.^@^@�f.^O^�^@^@^@^@^@^O^@^@h�=I/^@^@h�^EB/^@^@H9�t^UH�^E�.^@^@h��t ��^O^�^@^@^@^@�^O^�^@^@^@^@h�=>�
^@^@h��H�Ǹ^@^@^@^@�����������2^B^@^@h�E؋@4�E�H�E؋@^D�EԋU�H�E�H��H�������H�E�H�}�^@U^\H������H�^@h��������������^A^@^@�E�H�X��E�H�P�H�E�H�xLH�E�H���^A^@^@^@�^T��>^
^@^@h��H�Ǹ^@^@^@^@�'����������^A^@^@h�E�H��������b^A^@^@�U�H�E�H^A�H�E�H�E�H�E�H�E��@^X��^O�K^A^@^@h�E�^O�@^N^O��H�E�^O�@^L^O��H������A�ȉ�H�^U�^L^@^@�^@^D^@^@h�>^@^@^@^@^@^@^@^@%s: failed to read VFCT body!
^@vbios%x%x.bin^@wb^@^@^@^@^@^@^@%s: failed to dump vbios %x:%x
^@Dump vbios %x:%x to %s
^@^A^[^C;,^@^@^@^D^@^@^@x���x^@^@^@^H����^@^@^@^X���H^@^@^@^A����^@^@^@^@^@^@^@^T^@^@^@^@^@^@^@^AzR^@^Ax^P^A^[^L^G^H�^A^G^P^T^@^@^@^^@^@^@����"^@^@^@^@^@^@^@^@>^FH�^C^C
^C^L^G^H^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@>^@^@^@^@^@^@^@�^T^@^@^@^@^@^@^Y^@^@^@^@^@^@^@�=^@^@^@^@^@^@^[^@^@^@^@^@^@^@^H^@^@^@^@^@^@^@^Z^@^@^@^@^@^@^@�=^@^@^@^@^@^@^\^@^@^@^@^@^@^@^H^@^@^@^@^@^@^@���o^@^>^@^@^@^@^@^@^@�^@^@^@^@^@^@^@^K^@^@^@^@^@^@^@^X^@^@^@^@^@^@^@^U^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^C^@^@^@^@^@^@^@�?^@^@^@^@^@^@^B^@^@^@^@^@^@^@�^@^@^@^@^@^@^@^T^@^@>^B^@^@^R^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^]^B^@^@^R^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@0^B^@^@^Q^B^Y^@`@^@^@^@^@^@^@^@^@^@^@^@^@^@^@<^B^@^@ ^@^@^@^@^@^@^>

Can see a 'failed to read VFCT body' and 'failed to dump vbios' errors.

Any help would be appreciated.

Looking for tool to dump SATA controllers bios to passthrough it to TrueNas VM

Can I use that tools to dump SATA controllers bios installed in M2 slot? looks like without bios in passthrough it don't work. But I can't find a proper tool to dump it.

Documentation Request for non-Windows Configurations

Could we get some extended documentation about configuring GPU Passthrough to non-Windows VMs, Docker, or LXC in the README? Or are there no real additional steps that need to be taken? For whatever it is worth, I've got a Beelink GTR-7 (R7 7840HS/Radeon 780M). Ideally looking at doing GPU passthrough for Scripted and JellyFin/Plex.

Thanks!

vBIOS CRC different for Ryzen 7 7735HS | Beelink SER 6 Pro

Hi - thanks for your guide, it was really helpful in getting it PCI passthrough working under proxmox 8.1.3 on a Beelink SER 6 Pro

I opened this issue as I noticed that the vbios I extract for the 680m had a different CRC compared to the provided ones.

I didn't detect any issues using the provied vbios versus my own extracted vbios, however I also haven't done as much testing, including no specific tests under windows.

I have attached my own extracted vbios for comparison

vbios_1002_1681.zip

Trigkey S5 Amd ryzen 5800h iGPU

hello, my question is has anyone found a way to passthrough the iGPU on the ryzen 5800h, or more to it has anyone done it on this machine?, if you have done any of them please reply. As i'm struggling to pass through the iGPU

5800H issue

hello i get a blue screen when using the 5800h driver only happens when installing drivers or crash fix