jabastien/qwiic_gps-rtk2

A breakout board for the ZED-F9P RTK module from ublox.

SparkFun Ublox GPS-RTK2 (Qwiic) - ZED-F9P

SparkFun GPS-RTK2 - ZED-F9P (GPS-15136)

The ZED-F9P module is the top-of-the-line module for high accuracy GNSS and GPS location solutions including RTK. The ZED-F9P is unique in that it can receive both L1 and L2 GPS bands as well as up to four constellations (GPS, GLONASS, BeiDou, Galileo) at the same time. This module is capable of 10mm positional accuracy and has survey-in mode allowing the module to become a base station and produce RTCM 3.x correction data.

Words, words, words. What does it look like?! I'm glad you asked!

With 33 satellites used in the location solution.

Repository Contents

• /Documents - Ublox datasheets and various whitepapers around RTK
• /Hardware - Eagle files

Documentation

• Installing an Arduino Library Guide - Basic information on how to install an Arduino library.
• Arduino Library - Arduino Library for Ublox modules.
• Hookup Guide - Hookup guide for the SparkFun Ublox GPS-RTK2.

License Information

This product is open source!

Various bits of the code have different licenses applied. Anything SparkFun wrote is beerware; if you see me (or any other SparkFun employee) at the local, and you've found our code helpful, please buy us a round!

Please use, reuse, and modify these files as you see fit. Please maintain attribution to SparkFun Electronics and release anything derivative under the same license.

Distributed as-is; no warranty is given.

• Your friends at SparkFun.