IoT Services account
- M2X/Flow account
- Control Center Account
MBED account
-
create StarterKit flow and M2X device
-
compile binary in MBED
- get the code https://developer.mbed.org/teams/Avnet/code/Avnet_ATT_Cellular_IOT/
- change server, URL and device name
-
activate the SIM on http://starterkit.att.com/app/sim-cards
- make sure the SIM card status is "Activated"
-
Initial HW setup
- make sure the development board (NXP FRDM-K64F) is running the 0226 FW from MBED. Do not follow the link to NXP, I was unable to flash that FW.
- cellular shield is running latest FW - 11.50.164451 as of 3/26/2017. Install the HW driver, and connection manager and check the version on Firmware tab of Connection Manager. https://starterkit.att.com/tutorials/cellular-shield-firmware-upgrade
-
Assemble the kit
-
Upload the code
-
Install terminal SW and watch debug output
- don't forget to change speed to 115200