joem/jwm_kicad_footprints_misc.pretty

My miscellaneous footprints for KiCad

jwm_kicad_footprints_misc.pretty

This is a collection of miscellaneous footprints for KiCad. Currently, this is my only custom footprints library, but it's also a holding library before I can break footprints out into separate specialized libraries.

(You might also be interested in my related misc symbols library and misc 3D models library for KiCad.)

Footprints included in this library:

Footprint	3D?	Description
Arduino_Nano_WithMFHeadersAnd3DModel	O	the KiCad library footprint with a found 3D model associated
C_Disc_D5.0mm_W2.5mm_P2.50mm_LZX	K	a small capacitor footprint made to look how they do on LZX Cadet PCBs
D_P7.62mm_Horizontal_LZX	K	a diode footprint made to look how they do on LZX Cadet PCBs
ESP32_Devkit_V1_DOIT_JWM	O	modified version of a found ESP32 devkit footprint
ESP32_Devkit_V1_DOIT_JWM_LessSilk	O	modified version of a found ESP32 devkit footprint, with less silkscreen
IDC-Header_2x05_P2.54mm_Vertical_EurorackPower	K	a 2x5 IDC header with Eurorack power annotations
IDC-Header_2x08_P2.54mm_Vertical_EurorackPower	K	a 2x8 IDC header with Eurorack power annotations
INA3221_Module		an INA3221 module, with VIN holes sized the same as on the module
INA3221_Module_P2.54mm		an INA3221 module, with VIN, VPU, and extra ground holes sized to fit P2.54mm pin headers
INA3221_Module_P2.54mm_NoVPU_NoExtraGnds		an INA3221 module, with VIN holes sized to fit P2.54mm pin headers, and no holes for VPU or the extra grounds
Jack_3.5mm_CUI_SJ1-3535NG_Horizontal_With3DModel	O	the KiCad library footprint with a found 3D model associated
Jack_3.5mm_QingPu_WQP-PJ302M_Horizontal	C	a PJ302M jack with slot holes
Jack_3.5mm_QingPu_WQP-PJ302M_Horizontal_CircularHoles	C	a PJ302M jack with round holes
Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles_With3DModel	O	the KiCad library footprint with a found 3D model associated
PinHeader_2x05_P2.54mm_Vertical_EurorackPower	K	a 2x5 pin header with Eurorack power annotations
PinHeader_2x08_P2.54mm_Vertical_EurorackPower	K	a 2x8 pin header with Eurorack power annotations
PinSocket_1x04_P2.54mm_Vertical_NoSilk	K	a 1x4 pin socket without any silkscreen
PinSocket_1x06_P2.54mm_Vertical_NoSilk	K	a 1x6 pin socket without any silkscreen
PinSocket_1x09_P2.54mm_Vertical_NoSilk	K	a 1x9 pin socket without any silkscreen
PinSocket_1x15_P2.54mm_Vertical_NoSilk	K	a 1x15 pin socket without any silkscreen
Potentiometer_Alpha_RD901F-20_Single_Horizontal_CircularHoles		a horizontally mounted Alpha potentiometer
Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_With3DModel	O	the KiCad library footprint with a found 3D model associated
RCA-Phono_CUI-Devices_RCJ-01X_Horizontal		a horizontally mounted RCA phone connector
RCA-Phono_CUI-Devices_RCJ-01X_or_RCJ-02X		an RCA phono footprint for either CUI Devices RCJ-01X or RCJ-02X, with one signal hole part way between the ideal placement for each jack (need to bend pin slightly in either case)
RCA-Phono_CUI-Devices_RCJ-01X_or_RCJ-02X_alt2		an RCA phono footprint for either CUI Devices RCJ-01X or RCJ-02X, with two signal holes right near each other (untested - not sure if fabs like it)
RCA-Phono_CUI-Devices_RCJ-02X_Vertical	C	a vertically mounted RCA phono connector (now with pin 1 as tip)
RCA-Phono_CUI-Devices_RCJ-02X_Vertical_InvertedPinNumbers	C	same as RCA-Phono_CUI-Devices_RCJ-02X_Vertical but pin 2 is tip
R_Axial_P7.62mm_Horizontal_LZX	K	a small resistor footprint made to look how they do on LZX Cadet PCBs
SSD1306_I2C_OLED_Module_0.96_inch	O	an SSD1306 I2C OLED display module with a 0.96" screen, no mounting holes
Switch_Toggle_Mountain-Switch_10TF230_Horizontal		a horizontally mounted SPDT toggle switch
misc_reference_for_test_and_whatever		three holes, not sure why I made this

3D? Column Key:

• K means it uses a model from the KiCad library
• C means it uses a model found in my misc 3D models library
• O means it uses a model made by someone else that isn't part of the KiCad library (no preview included for these)

For an easy preview of what these footprints look like, look in the images folder.

Please feel free to use these footprints as you'd like in your own projects. If they help you, I'm glad.