joseluu/d6_firmware

Firmware for the D6 Simple spectrum analyzer with tracking source (T.G.)

d6_firmware's Issues

list of serial commands

Is there a list of serial commands that this device takes for various adjustments such as rf output power level and other such commands. Thank you for working on this.

Edit to add: I do see the listed serial commands in the command.cpp. There appears to be an 'i' command to write to the registers. Would you happen to know if it exists in the original firmware?

How do i build that? Can you supply a precompiled version?

Seems like the makefile is for win

/bin/arm-eabi-gcc.exe -ggdb -ffunction-sections -O0 -mcpu=cortex-m3 -mthumb -IInc -I. -I/STM32F1xxxx/STM32F1xx_HAL_Driver/Inc -I/STM32F1xxxx/STM32F1xx_HAL_Driver/Inc/Legacy -I/STM32F1xxxx/CMSIS_HAL/Device/ST/STM32F1xx/Include -I/STM32F1xxxx/CMSIS_HAL/Include -DDEBUG=1 -DARM_MATH_CM3 -Dflash_layout -DSTM32F103C8 -DSTM32F103xB -DUSE_HAL_LEGACY -c Src/adc.c -o Debug/adc.o -MD -MF Debug/adc.dep
make: /bin/arm-eabi-gcc.exe: Command not found
Makefile:185: recipe for target 'Debug/adc.o' failed
make: *** [Debug/adc.o] Error 127

Only 'stock' version is working

Hi
I uploaded 'stock' file and it works.
Other files just showing flat line over all frequencies.

What might be the issue?

BTW I have this board