joskid/deprecated_empc-arpi-linux-drivers

emPC-A/RPI & emVIEW-7/RPI by Janz Tec AG

emPC-A/RPI, emVIEW-7/RPI by Janz Tec AG

This script installs and configures Linux Socket CAN, Serial port RS232/RS485 and RTC drivers

✅ Installation Instructions:

🔶 Not compatible with emPC-A/RPI3 / RPI3+ and emVIEW-7/RPI3 /RPI3+ ! Use empc-arpi3-linux-drivers repository!

for emPC-A/RPI3 / RPI3+ and emVIEW-7/RPI3 /RPI3+ use:

https://github.com/janztec/empc-arpi3-linux-drivers

---

Our pre-installed images are based on Raspbian Jessie with Linux kernel version 4.4 and drivers installed by our install.sh script. If you want to use newer kernel versions, you can try our "Installation Instructions (Experimental)" below.

create a backup copy of your µSD card before applying these steps!

Step 1:

Install one of the listed RASPBIAN operating system versions from below:

(Raspbian Jessie Lite, or Raspbian Jessie recommended. NOOBS installation not supported)

1. emPC-A/RPI: Raspbian Jessie Lite version 2015-11-24
   • Lite: https://downloads.raspberrypi.org/raspbian_lite/images/raspbian_lite-2015-11-24/
   • Desktop: https://downloads.raspberrypi.org/raspbian/images/raspbian-2015-11-24/

Step 2:

sudo bash
cd /tmp
wget https://raw.githubusercontent.com/janztec/empc-arpi-linux-drivers/master/install.sh -O install.sh
bash install.sh

---

Product pages

https://www.janztec.com/en/embedded-pc/embedded-computer/empc-arpi3/

emPC-A/RPI

FEATURES emPC-A/RPI

• Processor
  • Based on Raspberry Pi, Model B
  • Broadcom processor
  • Quad-Core CPU
  • Fanless cooling concept
  • Realtime clock, battery buffered
• Memory
  • System memory 1 GB
  • External accessible µSD card slot
• Graphics
  • HDMI graphic interface
• Connectors
  • 1 x 10/100 MBit/s Ethernet
  • 4 x USB (v2.0)
  • 1 x 9-pin D-SUB connector for serial debug console
  • 1 x CAN (ISO/DIS 11989-2, opto-isolated, termination settings via jumper)
  • 1 x RS232 (Rx, Tx, RTS, CTS) or switchable to RS485 (half duplex; termination settings via jumper)
  • Internal I/O
    • 4 x digital inputs (12 - 24VDC)
    • 4 x digital outputs (12 - 24VDC)
• Power Supply
  • Input 9 … 32 VDC
• DIN rail, wall mounting or desktop

---

emVIEW-7/RPI

https://www.janztec.com/en/embedded-pc/panel-pc/emview-7rpi3/

FEATURES emVIEW-7/RPI

• LCD Display
  • 7.0" WSVGA display size
  • LED backlight technology
  • Resolution 800 x 480
  • Projected capacitive touch screen (PCAP) (with multitouch capabilities)
  • Glass surface
• Same I/O as emPC-A/RPI