jtouug/freehal

Automatically exported from code.google.com/p/freehal

freehal's Issues

NCI / CI and switching around creates many problems.

I hope it is the right place to complain about this issue.

There are several problems with NCI / CI and switching around.
If you have made your selection and want to change it, it does not work as 
intended.
Let's say you want to change from NCI to CI. When you do that, it seems that 
you will get CI workunits but they are running as NCI (status is running non 
cpu intensive). To fix this you'll have to detach project and add it again. 
Nothing else resolves this.

There is at least one more problem, and this is a big one!
I have a setup to receive 1 WU per core and CI. Now, everything seems to run 
fine for some time. But then for now apparent reason CI changes to NCI (I did 
not do that!). Now, the problem is, that when this happens and you have queued 
let's say 500 WU-s (like I had), then they ALL start to run simultaneously. 
Yes, all 500 WU-s will run AT ONCE.
What that means is your computer will totally hang! It comsumes all CPU, and 
all memory. Then OS starts heavy swapping which saturates all HDD I/O. So your 
computer will not respond to anything, all that you can do is pull the plug. 
And after that you'll have to come up with some clever plan to stop all those 
WU-s from starting again when you'll restart (I have selected to run always).

Now, after you have come up with a brilliant idea to stop all those WU-s from 
starting, you still have 500+ WU-s in your queue. If you do not want to abort 
them all, you'll have to suspend them all and start resuming them in small 
quantities to not overload cpu and memory again. That's quite a lot manual 
monitoring and resuming. Might take several days.

All this happened to all of my computers just some days ago. And this is not 
the first time!
I home you can do something about it, as it is very, very annoying when it 
happens.
All I want to do is run CI units 24/7.

Original issue reported on code.google.com by [email protected] on 26 Jun 2012 at 1:46

Make hal2012-server-thread on Linux fails

What steps will reproduce the problem?
./configure && make hal2012-server hal2012-server-thread

What is the expected output? What do you see instead?
[100%] Built target hal2012-server
[  3%] Building CXX object 
CMakeFiles/hal2012-server-thread.dir/hal2012-startup.cpp.o
[  7%] Building CXX object 
CMakeFiles/hal2012-server-thread.dir/hal2012-server-thread.cpp.o
/home/jan/freehal/hal2012/hal2012-server-thread.cpp: In function ‘void* 
hal2012_handle_signal(void*)’:
/home/janfreehal/hal2012/hal2012-server-thread.cpp:690:9: error: 
‘parsed_type’ is not a member of ‘grammar2012’
/home/jan/freehal/hal2012/hal2012-server-thread.cpp:690:35: error: ‘parsed’ 
was not declared in this scope
make[3]: *** [CMakeFiles/hal2012-server-thread.dir/hal2012-server-thread.cpp.o] 
Error 1
make[2]: *** [CMakeFiles/hal2012-server-thread.dir/all] Error 2
make[1]: *** [CMakeFiles/hal2012-server-thread.dir/rule] Error 2
make: *** [hal2012-server-thread] Error 2

What version of the product are you using? On what operating system?
Ubuntu Linux 12.04 LTS

Original issue reported on code.google.com by [email protected] on 9 Aug 2012 at 11:27

Work Unit progress is not saved during shutdown or Boinc exiting.

What steps will reproduce the problem?
1. On Windows 7, download Boinc, install Freehal Project.
2. Request Tasks, receive task/workunit, workunit begins.
3. Workunit progress increases steadily.
4. After 4 or 5 hours, shutdown computer or exit Boinc.
5. Restart computer or Boinc program.

What is the expected output? What do you see instead?

Boinc and Freehal progress on workunit should continue from where last exited.  
It appears that Boinc or Freehal project is not saving progress at all upon 
exiting the program, which causes workunit to begin from the initial start.

What version of the product are you using? On what operating system?

Win 7, Boinc 7.0.28(x64)

Please provide any additional information below.

Original issue reported on code.google.com by thadguidry on 19 Nov 2012 at 3:04

Autocompile script not working, downloading files not found on server.

What steps will reproduce the problem?
1. Try to find the databases on other locations. 
2.
3.

What is the expected output? What do you see instead?
[root@mystic-dragon /]# ./freehal.install
Download source code...
Compile server
Error: Compile server
cp: will not overwrite just-created `saved/en/conceptnet-commonsense-is-1.prot' 
with `lang_en/prot/conceptnet-commonsense-is-1.prot'
cp: will not overwrite just-created `saved/en/conceptnet-commonsense-is-3.prot' 
with `lang_en/prot/conceptnet-commonsense-is-3.prot'
cp: will not overwrite just-created `saved/en/conceptnet-commonsense-is-4.prot' 
with `lang_en/prot/conceptnet-commonsense-is-4.prot'
cp: will not overwrite just-created `saved/en/conceptnet-commonsense-is-5.prot' 
with `lang_en/prot/conceptnet-commonsense-is-5.prot'
cp: will not overwrite just-created `saved/en/conceptnet-commonsense-is-6.prot' 
with `lang_en/prot/conceptnet-commonsense-is-6.prot'
cp: cannot stat `lang_en/*.xml*': No such file or directory
cp: cannot stat `lang_en/*/*.xml*': No such file or directory
Download database...
--2012-08-16 23:23:55--  http://www.freehal.org/download/en-database.db.main
Resolving www.freehal.org... 85.10.193.13, fe80::216:17ff:fe99:d3a8
Connecting to www.freehal.org|85.10.193.13|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2012-08-16 23:23:55 ERROR 404: Not Found.

--2012-08-16 23:23:55--  http://www.freehal.org/download/en-database.db.index
Resolving www.freehal.org... 85.10.193.13, fe80::216:17ff:fe99:d3a8
Connecting to www.freehal.org|85.10.193.13|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2012-08-16 23:23:55 ERROR 404: Not Found.

--2012-08-16 23:23:55--  http://www.freehal.org/download/en-database.db.cache
Resolving www.freehal.org... 85.10.193.13, fe80::216:17ff:fe99:d3a8
Connecting to www.freehal.org|85.10.193.13|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2012-08-16 23:23:55 ERROR 404: Not Found.

mv: cannot stat `en-database.db.main': No such file or directory
mv: cannot stat `en-database.db.index': No such file or directory
mv: cannot stat `en-database.db.cache': No such file or directory
--2012-08-16 23:23:55--  http://www.freehal.org/download/de-database.db.main
Resolving www.freehal.org... 85.10.193.13, fe80::216:17ff:fe99:d3a8
Connecting to www.freehal.org|85.10.193.13|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2012-08-16 23:23:55 ERROR 404: Not Found.

--2012-08-16 23:23:55--  http://www.freehal.org/download/de-database.db.index
Resolving www.freehal.org... 85.10.193.13, fe80::216:17ff:fe99:d3a8
Connecting to www.freehal.org|85.10.193.13|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2012-08-16 23:23:55 ERROR 404: Not Found.

--2012-08-16 23:23:55--  http://www.freehal.org/download/de-database.db.cache
Resolving www.freehal.org... 85.10.193.13, fe80::216:17ff:fe99:d3a8
Connecting to www.freehal.org|85.10.193.13|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2012-08-16 23:23:55 ERROR 404: Not Found.

mv: cannot stat `de-database.db.main': No such file or directory
mv: cannot stat `de-database.db.index': No such file or directory
mv: cannot stat `de-database.db.cache': No such file or directory
Compile GUI
Error: Compile GUI
Create links...

----------------------------------------------------------------------

What version of the product are you using? On what operating system?
The latest version of auto compile script on the website.

Please provide any additional information below.
The databases aren't in the correct location.
After looking in to where the databases are located now, I am not able to find 
them anywhere.
I also do not know why I get a error on Compile server.

Original issue reported on code.google.com by [email protected] on 17 Aug 2012 at 9:37

Compile error with Autocompile script

What steps will reproduce the problem?
1. Executing the Autocompile script.
2.
3.

What is the expected output? What do you see instead?

Error: Compile server

compile-server.log attached


What version of the product are you using? On what operating system?

autocompile script downloaded and executed at 16:20 CEST 14/07/2012

ubuntu 12.04 LTS

Please provide any additional information below.

Original issue reported on code.google.com by [email protected] on 14 Jul 2012 at 2:39

Attachments:

• compile-server.log