jules-hohmann/cv-intro

cv-intro

Capture Video Stream

For network_stream_capture.py and network_stream_capture_notebook.ipynb to work, you will need to be connected to the AUVC network.

In the backseat computer, open the wpa configuration file:

sudo nano /etc/wpa_supplicant/wpa_supplicant.conf

Add the AUVC network to the file and give it a higher priority. The higher prority will ensure that your RPi will connect to AUVC, not MIT when AUVC is available

network={
        ssid="AUVC"
        psk="g0_fast!"
        priority=2
}

Switch between networks

To force the RPi to connect to the network of your choice, you can use the commands below. This will be useful when you need internet access.

• See list of networks

sudo wpa_cli -i wlan0 list_networks

• Select desired network Replace 0 with the desired network

sudo wpa_cli -i wlan0 select_network 0