kdelios/esp8266-with-dht21-and-ccs811-sensors

Data logger using a ESP8266, DHT21 for temp and Hum, and a CCS811 for air quality

Bedroom environmental data station build, using a ESP8266 NodeMCUV3, and the following sensors:

1. DHT21 (AM2301) sensor measuring temperature (°C) & humidity (%RH).

2. CJMCU-811 CS811 (I2C) sensor measuring eCO2 (the equivalent CO2 400ppm to 8192ppm)& TVOC (Total Volatile Organic Compound 0ppb to 1187ppb). CCS811 receives temperature and humidity readings from DHT21 for compensation algorithm. New CCS811 sensors require 48h-burn in. Once burned in a sensor requires 20 minutes of run-in before readings are considered good. Connect nWAKE sensor pin directly to GND, so the CCS811 will avoid enter into SLEEP mode [sensor it's always ACTIVE]

Logging all values to a ThinkSpeak channel every 2 min. Build by Konstantinos Deliopoulos @ Dec 2019