kettenhoax/gazebo_ros_articulated_steering

Articulated steering Gazebo plugin with ROS interface

Articulated steering control plugin for Gazebo

Controls a wheeled vehicle with articulation steering and all wheel drive based on ackermann_msgs/msg/AckermannDriveStamped.

Installation

• clone to your ros2 workspace
• rosdep install --from-path src -i
• colcon build
• source install/setup.bash

Make sure the package environment is sourced, so the library is on LD_LIBRARY_PATH when spawning a robot into a Gazebo world.

Parameters

The following parameters can be passed as children on the sdf plugin element.

• command_timeout: seconds to wait until invalidating the last command and setting motor target velocity to zero, latency will be added implicitly
• update_rate: update rate in Hz
• publish_pid: enable publishing of PID controller values as ROS topic
• {joint_name}_pid_gain: gains in order PID for respective joint motor
• {joint_name}_i_range: integral error bounds for respective joint motor
• {joint_name}: change the plugins search name for logical joint

Parameters on the geometry of the vehicle are derived from the links and joints on the model.

Subscriptions

• cmd_drive: drive commands of type ackermann_msgs/msg/AckermannDriveStamped

Publishers

• odom_drive: drive odometry of type ackermann_msgs/msg/AckermannDriveStamped
• pid/{joint_name}: PID state of type control_msgs/msg/PidState, enabled if publish_pid is true

Example

<model>
    ...
    <plugin name="gazebo_ros_articulated_steering" filename="libgazebo_ros_articulated_steering.so">
        <ros>
          <namespace>vehicle</namespace>
        </ros>

        <robot_base_frame>base_footprint</robot_base_frame>
        <update_rate>100.0</update_rate>

        <front_right_motor>front_right_motor</front_right_motor>
        <front_left_motor>front_left_motor</front_left_motor>
        <rear_right_motor>rear_right_motor</rear_right_motor>
        <rear_left_motor>rear_left_motor</rear_left_motor>

        <articulation_joint>articulation_joint</articulation_joint>

        <front_right_motor_pid_gain>1 0 0</front_right_motor_pid_gain>
        <front_left_motor_pid_gain>1 0 0</front_left_motor_pid_gain>
        <rear_right_motor_pid_gain>1 0 0</rear_right_motor_pid_gain>
        <rear_left_motor_pid_gain>1 0 0</rear_left_motor_pid_gain>

        <articulation_pid_gain>1 0 0</articulation_pid_gain>
      </plugin>
      ...
</model>