komandor-app/ngx-http-auth-jwt-module

Secure your NGINX locations with JWT

Intro

This is an NGINX module to check for a valid JWT and proxy to an upstream server or redirect to a login page.

Building and testing

To build the Docker image, start NGINX, and run our Bash test against it, run

make

When you make a change to the module, run make rebuild-nginx.

When you make a change to test.sh, run make rebuild-test-runner.

Command	Description
make build-nginx	Builds the NGINX image
make rebuild-nginx	Re-builds the NGINX image
make build-test-runner	Builds the image that will run test.sh
make rebuild-test-runner	Re-builds the image that will run test.sh
make start-nginx	Starts the NGINX container
make stop-nginx	Stops the NGINX container
make test	Runs test.sh against the NGINX container

You can re-run tests as many times as you like while NGINX is up. When you're done running tests, make sure to stop the NGINX container.

The Dockerfile builds all of the dependencies as well as the module, downloads a binary version of NGINX, and runs the module as a dynamic module.

Tests get executed in containers. This project is 100% Docker-ized.

Dependencies

This module depends on the JWT C Library

Transitively, that library depends on a JSON Parser called Jansson as well as the OpenSSL library.

NGINX Directives

This module requires several new nginx.conf directives, which can be specified in on the main server or location level.

auth_jwt_key "00112233445566778899AABBCCDDEEFF00112233445566778899AABBCCDDEEFF"; # see docs for format based on algorithm
auth_jwt_loginurl "https://yourdomain.com/loginpage";
auth_jwt_enabled on;
auth_jwt_algorithm HS256; # or RS256
auth_jwt_validate_email on;  # or off
auth_jwt_use_keyfile off; # or on
auth_jwt_keyfile_path "/app/pub_key";

The default algorithm is 'HS256', for symmetric key validation. When using HS256, the value for auth_jwt_key should be specified in binhex format. It is recommended to use at least 256 bits of data (32 pairs of hex characters or 64 characters in total) as in the example above. Note that using more than 512 bits will not increase the security. For key guidelines please see NIST Special Publication 800-107 Recommendation for Applications Using Approved Hash Algorithms, Section 5.3.2 The HMAC Key.

The configuration also supports the auth_jwt_algorithm 'RS256', for RSA 256-bit public key validation. If using "auth_jwt_algorithm RS256;", then the auth_jwt_key field must be set to your public key OR auth_jwt_use_keyfile should be set to on with the auth_jwt_keyfile_path set to the public key path (nginx won't start if the auth_jwt_use_keyfile is set to on without a keyfile). That is the public key, rather than a PEM certificate. I.e.:

auth_jwt_key "-----BEGIN PUBLIC KEY-----
MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA0aPPpS7ufs0bGbW9+OFQ
RvJwb58fhi2BuHMd7Ys6m8D1jHW/AhDYrYVZtUnA60lxwSJ/ZKreYOQMlNyZfdqA
rhYyyUkedDn8e0WsDvH+ocY0cMcxCCN5jItCwhIbIkTO6WEGrDgWTY57UfWDqbMZ
4lMn42f77OKFoxsOA6CVvpsvrprBPIRPa25H2bJHODHEtDr/H519Y681/eCyeQE/
1ibKL2cMN49O7nRAAaUNoFcO89Uc+GKofcad1TTwtTIwmSMbCLVkzGeExBCrBTQo
wO6AxLijfWV/JnVxNMUiobiKGc/PP6T5PI70Uv67Y4FzzWTuhqmREb3/BlcbPwtM
oQIDAQAB
-----END PUBLIC KEY-----";

OR

auth_jwt_use_keyfile on;
auth_jwt_keyfile_path "/etc/nginx/pub_key.pem";

A typical use would be to specify the key and loginurl on the main level and then only turn on the locations that you want to secure (not the login page). Unauthorized requests are given 302 "Moved Temporarily" responses with a location of the specified loginurl.

auth_jwt_redirect            off;

If you prefer to return 401 Unauthorized, you may turn auth_jwt_redirect off.

auth_jwt_validation_type AUTHORIZATION;
auth_jwt_validation_type COOKIE=rampartjwt;

By default the authorization header is used to provide a JWT for validation. However, you may use the auth_jwt_validation_type configuration to specify the name of a cookie that provides the JWT.

auth_jwt_validate_email off;

By default, the module will attempt to validate the email address field of the JWT, then set the x-email header of the session, and will log an error if it isn't found. To disable this behavior, for instance if you are using a different user identifier property such as 'sub', set auth_jwt_validate_email to the value off.