kreativmonkey/hassio-addons

Hassio add-ons for my home automation

hassio-addons's Issues

add support for x86_64

In short, i have a old mediapc who is now a hass.io central and i want to install homegear on it. The archtype is x86_64 and i want add this archtype to get a bigger support range.

not working user and group not found

H guys,

the add-on is starting but I get this in the log. Also web interface is not accessible.

Can you please help

id: ‘homegear’: no such user
id: ‘homegear’: no such user
chown: invalid user: ‘homegear:homegear’
cp: cannot stat '/var/lib/homegear.data/*': No such file or directory
chown: invalid user: ‘homegear:homegear’
chown: invalid user: ‘homegear:homegear’
homegear: unrecognized service
homegear-management: unrecognized service
homegear-influxdb: unrecognized service

The user homegear not even excist in the docker image.
How I can add it and how it will be excist after a restart of the image.
Also there is no basic homgear main config.

Thanks

User/Password

Supporting the HassOs user/password management for homegear admin. Ore add a config part for user/password.

https://developers.home-assistant.io/docs/en/hassio_addon_config.html

Switch to Alpine Linux

Currently thies add-on is only for raspberryPi. I want to change from Debian to the homeassistant alpine build to support all platforms that are supported by hass.io.

https://doc.homegear.eu/data/homegear/installation.html
https://developers.home-assistant.io/docs/en/hassio_addon_index.html

This add-on is not available on your system.

Using Rpi 3 with HassOS 3.7, what do I need to change to be able to install?

Repository not showing up

Hi
Im trying to add the repository as an addon but get the following error:
19-04-10 07:24:44 INFO (MainThread) [hassio.addons.git] Clone add-on https://github.com/kreativmonkey/hassio-addons repository 19-04-10 07:24:46 WARNING (MainThread) [hassio.addons.data] Can't read /data/addons/git/441b9bcc/homegear/config.json: required key not provided @ data['arch']. Got None 19-04-10 07:24:46 WARNING (MainThread) [hassio.addons.data] Can't read /data/addons/git/441b9bcc/homegear-rpi/config.json: required key not provided @ data['arch']. Got None
Thie prevents the addon from being shown.

Permission problems after start

Currently after first start there are some permission problems than you can not connect to RPC.

Huge Hassio snapshot after adding Homegear

I love this plugin. At last I am able to use my MAX devices without problems. Thank you for that!

Ever since I have added the plugin the size of my snapshots have increased in size dramatically. When I open the snapshot, I see that Homegear alone is 203Mb in size. The whole snapshot is 308Mb, so Homegear alone takes up 2/3 of the snapshot size.

I use:

• Raspberyy Pi 3B
• System | HassOS 3.12
• Home Assistant 0.106.5

Homegear add-no no longer starts after 0.72.0 update on RPI4 (64 bits)

Logs show:

id: ‘homegear’: no such user
id: ‘homegear’: no such user
chown: invalid user: ‘homegear:homegear’
cp: cannot stat '/var/lib/homegear.data/modules/': No such file or directory
cp: cannot stat '/var/lib/homegear.data/flows/nodes/': No such file or directory
chown: invalid user: ‘homegear:homegear’
chown: invalid user: ‘homegear:homegear’
homegear: unrecognized service
homegear-management: unrecognized service
homegear-influxdb: unrecognized service
03/10/21 23:39:48.258 Info: Shutting down shared object family module "Miscellaneous"...
03/10/21 23:39:48.258 Stopping UPnP server...
03/10/21 23:39:48.271 (Shutdown) => Stopping Event handler
03/10/21 23:39:48.273 (Shutdown) => Stopping MQTT client
03/10/21 23:39:48.669 (Shutdown) => Stopping RPC servers
03/10/21 23:39:48.735 RPC Server (Port 2001): Info: Waiting for threads to finish.
03/10/21 23:39:48.811 RPC Server (Port 2002): Info: Waiting for threads to finish.
03/10/21 23:39:48.835 RPC Server (Port 2003): Info: Waiting for threads to finish.
03/10/21 23:39:48.837 (Shutdown) => Stopping RPC client
03/10/21 23:39:48.837 (Shutdown) => Closing physical interfaces...

I tried rebuilding and reinstalling the add-on. Let me know if you need more information/logging.

Devices not detected by HA after reboot

I am using a Pi 3B with a fresh install of Hassio. Homegear is installed and working, I am talking to my cube and I have been able to link 4*TRV’s using Homematic Manager.

However when I reboot the Pi (after changing configuration.yaml) the TRV’s are not found automatically by Home Assistant.

However, if I restart just HA server, via Configuration - Server Controls, then HA finds the TRV’s.

If I reboot the Pi, the TRV’s are greyed out and unavailable until I restart HA server.

It seems like a timing issue, as it HA is starting before Homegear and so not detecting the TRV’s. Have you seen anything like this or have any ideas what I might have done wrong?

https://community.home-assistant.io/t/converting-a-max-cube-to-cul-cun-to-use-with-home-assistant/74218/236?u=kreativmonkey

Homegear Admin - Page not found

It seems like there are more permission issues.

HASSIO repository error

19-12-10 22:50:36 INFO (MainThread) [hassio.store.git] Clone add-on https://github.com/kreativmonkey/hassio-addons repository
19-12-10 22:50:38 WARNING (MainThread) [hassio.store.data] Can't read /data/addons/git/441b9bcc/homegear/config.json: required key not provided @ data['arch']. Got None
19-12-10 22:50:39 INFO (MainThread) [hassio.store] Load add-ons from store: 66 all - 1 new - 0 remove
19-12-10 22:52:26 INFO (MainThread) [hassio.store.git] Clone add-on https://github.com/kreativmonkey/hassio-addons/tree/master/homegear-rpi repository
19-12-10 22:52:26 ERROR (MainThread) [hassio.store.git] Can't clone https://github.com/kreativmonkey/hassio-addons/tree/master/homegear-rpi repository: Cmd('git') failed due to: exit code(128)
cmdline: git clone --depth=1 --recursive --shallow-submodules -v https://github.com/kreativmonkey/hassio-addons/tree/master/homegear-rpi /data/addons/git/ab915b68
stderr: 'Cloning into '/data/addons/git/ab915b68'...
fatal: repository 'https://github.com/kreativmonkey/hassio-addons/tree/master/homegear-rpi/' not found
'.
19-12-10 22:52:26 ERROR (MainThread) [hassio.store] Can't load from repository https://github.com/kreativmonkey/hassio-addons/tree/master/homegear-rpi
19-12-10 22:52:27 WARNING (MainThread) [hassio.store.data] Can't read /data/addons/git/441b9bcc/homegear/config.json: required key not provided @ data['arch']. Got None

Not starting..

At the first start, it tells: nodeBlueCredentialKey.txt

After creating this file with a random key, homegear ist starting, but the RPC-Server on Port 2001 does not anwer.
Also the Webinterface just showing 502: bad Gateway

Home Assistant OS 5.12
supervisor-2021.03.6
core-2021.3.4

Homegear
Current version: 0.72.0

homegear_log.txt

amd_64 "can't build returned a non-zero code: 100"

Hi,
due to my search for a possability to get my CUL working with the HA homematic addon, I tried to install this addon.

Unfortunately i get this error while installing your addon from git.

20-04-25 15:39:52 ERROR (SyncWorker_2) [supervisor.docker.addon] Can't build 441b9bcc/amd64-addon-homegear:0.9.0: The command '/bin/bash -o pipefail -c apt-get update && apt-get -y install apt-transport-https wget ca-certificates apt-utils gnupg libzip4 libavahi-client3 libavahi-client-dev insserv' returned a non-zero code: 100

Dependency Dashboard

This issue lists Renovate updates and detected dependencies. Read the Dependency Dashboard docs to learn more.

This repository currently has no open or pending branches.

Detected dependencies

dockerfile

homegear/Dockerfile

---

• Check this box to trigger a request for Renovate to run again on this repository

HM-MOD-RPI-PCB: Failed to set GPIO with index "1"

Hello,

can anyobody help me out if that should work with HM-MOD-RPI-PCB? I am able to receive my device values like switch states and climate temperature/mode, but cannot send anything. I got:
12/26/18 14:42:49.855 Failed to set GPIO with index "1": Device not open.

Incorrect link to Homegear Docs

In the plugin description, there is a link to the Homegear docs, which refers to https://doc.homegear.eu/data/homegear/configuration.html

However, that link does not work. It probably should be:
https://doc.homegear.eu/homegear/configuration.html

no max.conf in homegear/families/

Hi,

I installed your addon to use it with a flashed MaxCube.
As suggested in this post I wanted to update the max.conf file. via samba share.

I dont now what i am missing:
The file max.conf is missing and instead all files in the homegear folder seem to be of the kind
homegear-start.sh.dpkg-new

I am an absolut beginner: what i understood, is that those files are not usable directly in hassio, since all addons are docker containers.

what do i have to do to get this addon up and running?

thanks a lot!

Installing on amd64

Failed Packages:

• python-lzo