kriswiner/ladybug

ladybug's Issues

32.768 oscillator necessary?

Hey Kris,

Making a custom board after prototyping with the Ladybug. Wondering if you know offhand if the 32.768 oscillator is needed if I'm not using the RTC? Would the core software need to be updated?

Thanks much!

Automatic sleep mode?

Hi Kris,
I've loaded into the Ladybug the firmware BlinkLadybug.
Then the firmware starts.
It works (red led blinks), but after 5 minutes seems to stop (red led off).

Then if I open the com port on the PC the firmware seems to restart and with com port opened doesn't stop after 5 min.

Seems that, without com port opened, there's an automatic sleep mode after 5 mins.
It's correct?
How can I disable it?

Thank's
Gianluca Isernia

Got no Serial Output

Hello, i can succesfully upload an new Sketch to the LadyBug Board but after uploading, USB disconnect automaticly and i got no Serial Output, what is my Error here?

problem uploading sketch

Hi, i have the ladybug L432KC with Arduino 1.8.5 with all the relevant libraries to support the ladybag.
when i try to upload a sketch (after successfully compiling it for the ladybug) i get this message:
Cannot open DFU device 0483:df11
1
Cannot open DFU device 0483:df11
2
Cannot open DFU device 0483:df11
3.....
and so on until the board's port seems to disconnected.

do you have any idea or a lead on this issue?
thanks.

images

Adafruit library

Hi Kris,

How to install properly the Adafruit library for the Ladybug?

TY
Cédric