kshailen/terraform-aws-eks

terraform-aws-eks

Deploy a full AWS EKS cluster with Terraform

What resources are created

1. VPC
2. Internet Gateway (IGW)
3. Public and Private Subnets
4. Security Groups, Route Tables and Route Table Associations
5. IAM roles, instance profiles and policies
6. An EKS Cluster
7. Autoscaling group and Launch Configuration
8. Worker Nodes in a private Subnet
9. The ConfigMap required to register Nodes with EKS
10. KUBECONFIG file to authenticate kubectl using the heptio authenticator aws binary

Configuration

You can configure you config with the following input variables:

Name	Description	Default
cluster-name	The name of your EKS Cluster	EKS_TEST
aws-region	The AWS Region to deploy EKS	us-east-1
k8s-version	The desired K8s version to launch	1.11
node-instance-type	Worker Node EC2 instance type	m4.large
desired-capacity	Autoscaling Desired node capacity	2
max-size	Autoscaling Maximum node capacity	5
min-size	Autoscaling Minimum node capacity	1
vpc-subnet-cidr	Subnet CIDR	10.0.0.0/16

You can create a file called terraform.tfvars in the project root, to place your variables if you would like to over-ride the defaults.

How to use this example

git clone https://github.com/kshailen/terraform-aws-eks.git
cd terraform-aws-eks

IAM

The AWS credentials must be associated with a user having at least the following AWS managed IAM policies

• IAMFullAccess
• AutoScalingFullAccess
• AmazonEKSClusterPolicy
• AmazonEKSWorkerNodePolicy
• AmazonVPCFullAccess
• AmazonEKSServicePolicy
• AmazonEKS_CNI_Policy
• AmazonEC2FullAccess

In addition, you will need to create the following managed policies

EKS

{
    "Version": "2012-10-17",
    "Statement": [
        {
            "Effect": "Allow",
            "Action": [
                "eks:*"
            ],
            "Resource": "*"
        }
    ]
}

Terraform

You need to run the following commands to create the resources with Terraform:

terraform init
terraform plan
terraform apply

TIP: you should save the plan state terraform plan -out eks-state or even better yet, setup remote storage for Terraform state. You can store state in an S3 backend, with locking via DynamoDB

Setup kubectl

Setup your KUBECONFIG

terraform output kubeconfig > ~/.kube/eks-cluster
export KUBECONFIG=~/.kube/eks-cluster

Authorize worker nodes

Get the config from terraform output, and save it to a yaml file:

terraform output config-map > config-map-aws-auth.yaml

Apply the config map to EKS:

kubectl apply -f config-map-aws-auth.yaml

You can verify the worker nodes are joining the cluster

kubectl get nodes --watch

Cleaning up

You can destroy this cluster entirely by running:

terraform plan -destroy
terraform destroy  --force

Deploying the Kubernetes dashboard

kubectl create -f https://raw.githubusercontent.com/kubernetes/dashboard/master/aio/deploy/recommended/kubernetes-dashboard.yaml

Create an administrative account and cluster role binding

kubectl apply -f eks-admin-service-account.yaml
kubectl apply -f eks-admin-cluster-role-binding.yaml

Installing Heapster and InfluxDB

kubectl apply -f https://raw.githubusercontent.com/kubernetes/heapster/master/deploy/kube-config/influxdb/heapster.yaml
kubectl apply -f https://raw.githubusercontent.com/kubernetes/heapster/master/deploy/kube-config/influxdb/influxdb.yaml
kubectl apply -f https://raw.githubusercontent.com/kubernetes/heapster/master/deploy/kube-config/rbac/heapster-rbac.yaml

Start proxy to open kubernetes Dashoard UI

kubectl proxy --address 0.0.0.0 --accept-hosts '.*' &

Get a token

aws-iam-authenticator -i EKS_TEST token | jq .status.token

Log in to dashboard

http://localhost:8001/api/v1/namespaces/kube-system/services/https:kubernetes-dashboard:/proxy/#!/login

Set up Visualiser

Fork the repository and deploy the visualizer on kubernetes

git clone  https://github.com/kshailen/kube-ops-view.git
kubectl apply -f kube-ops-view/deploy/

Open Visualiser UI

Check if kubeproxy is running or not using following

ps -ef | grep -i kubectl | grep proxy

It will show output like below

Shailendras-MacBook-Pro:terraform-aws-eks shaikuma$ ps -ef | grep -i kubectl | grep proxy
  501 39202 21611   0  3:41PM ttys002    0:00.28 kubectl proxy --address 0.0.0.0 --accept-hosts 
Shailendras-MacBook-Pro:terraform-aws-eks shaikuma$ 

It's proxy is not running then run it using following

kubectl proxy --address 0.0.0.0 --accept-hosts '.*' &

Now direct your browser to http://localhost:8001/api/v1/namespaces/default/services/kube-ops-view/proxy/ It gives you view as below.

You could read further about it at this link.

Kubernetes Operational View is also available as a Helm Chart

Adding docker hub secret

Log in to Docker

On your laptop, you must authenticate with a registry in order to pull a private image:

docker login

When prompted, enter your Docker username and password.

The login process creates or updates a config.json file that holds an authorization token.

View the config.json file:

cat ~/.docker/config.json

The output contains a section similar to this:

{
    "auths": {
        "https://index.docker.io/v1/": {
            "auth": "c3R...zE2"
        }
    }
}

{{< note >}} If you use a Docker credentials store, you won't see that auth entry but a credsStore entry with the name of the store as value. {{< /note >}}

Create a Secret based on existing Docker credentials {#registry-secret-existing-credentials}

A Kubernetes cluster uses the Secret of docker-registry type to authenticate with a container registry to pull a private image.

If you already ran docker login, you can copy that credential into Kubernetes:

kubectl create secret generic regcred \
    --from-file=.dockerconfigjson=<path/to/.docker/config.json> \
    --type=kubernetes.io/dockerconfigjson

If you need more control (for example, to set a namespace or a label on the new secret) then you can customise the Secret before storing it. Be sure to:

• set the name of the data item to .dockerconfigjson
• base64 encode the docker file and paste that string, unbroken as the value for field data[".dockerconfigjson"]
• set type to kubernetes.io/dockerconfigjson

Example:

apiVersion: v1
kind: Secret
metadata:
  name: myregistrykey
  namespace: awesomeapps
data:
  .dockerconfigjson: UmVhbGx5IHJlYWxseSByZWVlZWVlZWVlZWFhYWFhYWFhYWFhYWFhYWFhYWFhYWFhYWFhYWxsbGxsbGxsbGxsbGxsbGxsbGxsbGxsbGxsbGxsbGx5eXl5eXl5eXl5eXl5eXl5eXl5eSBsbGxsbGxsbGxsbGxsbG9vb29vb29vb29vb29vb29vb29vb29vb29vb25ubm5ubm5ubm5ubm5ubm5ubm5ubm5ubmdnZ2dnZ2dnZ2dnZ2dnZ2dnZ2cgYXV0aCBrZXlzCg==
type: kubernetes.io/dockerconfigjson

If you get the error message error: no objects passed to create, it may mean the base64 encoded string is invalid. If you get an error message like Secret "myregistrykey" is invalid: data[.dockerconfigjson]: invalid value ..., it means the base64 encoded string in the data was successfully decoded, but could not be parsed as a .docker/config.json file.

Create a Secret by providing credentials on the command line

Create this Secret, naming it regcred:

kubectl create secret docker-registry regcred --docker-server=<your-registry-server> --docker-username=<your-name> --docker-password=<your-pword> --docker-email=<your-email>

where:

• <your-registry-server> is your Private Docker Registry FQDN. (https://index.docker.io/v1/ for DockerHub)
• <your-name> is your Docker username.
• <your-pword> is your Docker password.
• <your-email> is your Docker email.

You have successfully set your Docker credentials in the cluster as a Secret called regcred.

Typing secrets on the command line may store them in your shell history unprotected, and those secrets might also be visible to other users on your PC during the time that kubectl is running.

Inspecting the Secret regcred

To understand the contents of the regcred Secret you just created, start by viewing the Secret in YAML format:

kubectl get secret regcred --output=yaml

The output is similar to this:

apiVersion: v1
kind: Secret
metadata:
  ...
  name: regcred
  ...
data:
  .dockerconfigjson: eyJodHRwczovL2luZGV4L ... J0QUl6RTIifX0=
type: kubernetes.io/dockerconfigjson

The value of the .dockerconfigjson field is a base64 representation of your Docker credentials.

To understand what is in the .dockerconfigjson field, convert the secret data to a readable format:

kubectl get secret regcred --output="jsonpath={.data.\.dockerconfigjson}" | base64 --decode

The output is similar to this:

{"auths":{"your.private.registry.example.com":{"username":"janedoe","password":"xxxxxxxxxxx","email":"[email protected]","auth":"c3R...zE2"}}}

To understand what is in the auth field, convert the base64-encoded data to a readable format:

echo "c3R...zE2" | base64 --decode

The output, username and password concatenated with a :, is similar to this:

janedoe:xxxxxxxxxxx

Notice that the Secret data contains the authorization token similar to your local ~/.docker/config.json file.

You have successfully set your Docker credentials as a Secret called regcred in the cluster.

Logging into ecr

$(aws ecr get-login --no-include-email --region us-east-1)

AWS Support Page:

https://aws.amazon.com/premiumsupport/knowledge-center/eks-cluster-kubernetes-dashboard/

EKS User Guide

EKS WorkShop

How to setup ALB ingress Controller