IPFS implementation in Go
IPFS is a global, versioned, peer-to-peer filesystem. It combines good ideas from Git, BitTorrent, Kademlia, SFS, and the Web. It is like a single bittorrent swarm, exchanging git objects. IPFS provides an interface as simple as the HTTP web, but with permanence built in. You can also mount the world at /ipfs.
For more info see: https://github.com/ipfs/ipfs.
Please put all issues regarding IPFS design in the ipfs repo issues. Please put all issues regarding Go IPFS implementation in this repo.
Table of Contents
Security Issues
The IPFS protocol and its implementations are still in heavy development. This means that there may be problems in our protocols, or there may be mistakes in our implementations. And -- though IPFS is not production-ready yet -- many people are already running nodes in their machines. So we take security vulnerabilities very seriously. If you discover a security issue, please bring it to our attention right away!
If you find a vulnerability that may affect live deployments -- for example, by exposing a remote execution exploit -- please send your report privately to [email protected]. Please DO NOT file a public issue.
If the issue is a protocol weakness that cannot be immediately exploited or something not yet deployed, just discuss it openly.
Install
The canonical download instructions for IPFS are over at: http://ipfs.io/docs/install/. It is highly suggested you follow those instructions if you are not interested in working on IPFS development.
Install prebuilt packages
We host prebuilt binaries over at our distributions page.
From there:
- Click the blue "Download go-ipfs" on the right side of the page.
- Open/extract the archive.
- Move
ipfs
to your path (install.sh
can do it for you).
Build from Source
Install Go
First, you'll need Go. If you don't have it: Download Go 1.5.2+. Go 1.6 is not yet supported.
You'll need to add Go's bin directories to your $PATH
environment variable e.g., by adding these lines to your /etc/profile
(for a system-wide installation) or $HOME/.profile
:
export PATH=$PATH:/usr/local/go/bin
export PATH=$PATH:$GOPATH/bin
(If you run into trouble, see the Go install instructions).
Download + Compile IPFS
go-ipfs differs from the vanilla go get
flow: it uses
gx/gx-go
for dependency management. This means you'll need to perform download and
install steps separately.
First download go-ipfs
without installing:
$ go get -d github.com/ipfs/go-ipfs
$ cd $GOPATH/src/github.com/ipfs/go-ipfs
If you don't already have them on your system, install gx
and gx-go
:
$ make toolkit_upgrade
Finally, install go-ipfs
:
$ make install
Troubleshooting
git
is required in order forgo get
to fetch all dependencies.- Package managers often contain out-of-date
golang
packages. Ensure thatgo version
reports at least 1.5.2. See above for how to install go. - If you are interested in development, please install the development dependencies as well.
- WARNING: Older versions of OSX FUSE (for Mac OS X) can cause kernel panics when mounting! We strongly recommend you use the latest version of OSX FUSE. (See ipfs#177)
- For more details on setting up FUSE (so that you can mount the filesystem), see the docs folder.
- Shell command completion is available in
misc/completion/ipfs-completion.bash
. Read docs/command-completion.md to learn how to install it. - See the init examples for how to connect IPFS to systemd or whatever init system your distro uses.
Development Dependencies
If you make changes to the protocol buffers, you will need to install the protoc compiler.
Updating
IPFS has an updating tool that can be accessed through ipfs update
. The tool is
not installed alongside IPFS in order to keep that logic independent of the main
codebase. To install ipfs update
, either download it here
or install it from source with go get -u github.com/ipfs/ipfs-update
.
Usage
ipfs - Global p2p merkle-dag filesystem.
ipfs [<flags>] <command> [<arg>] ...
SUBCOMMANDS
BASIC COMMANDS
init Initialize ipfs local configuration
add <path> Add a file to ipfs
cat <ref> Show ipfs object data
get <ref> Download ipfs objects
ls <ref> List links from an object
refs <ref> List hashes of links from an object
DATA STRUCTURE COMMANDS
block Interact with raw blocks in the datastore
object Interact with raw dag nodes
files Interact with objects as if they were a unix filesystem
ADVANCED COMMANDS
daemon Start a long-running daemon process
mount Mount an ipfs read-only mountpoint
resolve Resolve any type of name
name Publish or resolve IPNS names
dns Resolve DNS links
pin Pin objects to local storage
repo Manipulate an IPFS repository
NETWORK COMMANDS
id Show info about ipfs peers
bootstrap Add or remove bootstrap peers
swarm Manage connections to the p2p network
dht Query the DHT for values or peers
ping Measure the latency of a connection
diag Print diagnostics
TOOL COMMANDS
config Manage configuration
version Show ipfs version information
update Download and apply go-ipfs updates
commands List all available commands
Use 'ipfs <command> --help' to learn more about each command.
ipfs uses a repository in the local file system. By default, the repo is located
at ~/.ipfs. To change the repo location, set the $IPFS_PATH environment variable:
export IPFS_PATH=/path/to/ipfsrepo
Getting Started
See also: http://ipfs.io/docs/getting-started/
To start using IPFS, you must first initialize IPFS's config files on your
system, this is done with ipfs init
. See ipfs init --help
for information on
the optional arguments it takes. After initialization is complete, you can use
ipfs mount
, ipfs add
and any of the other commands to explore!
Some things to try
Basic proof of 'ipfs working' locally:
echo "hello world" > hello
ipfs add hello
# This should output a hash string that looks something like:
# QmT78zSuBmuS4z925WZfrqQ1qHaJ56DQaTfyMUF7F8ff5o
ipfs cat <that hash>
Docker usage
An IPFS docker image is hosted at hub.docker.com/r/ipfs/go-ipfs.
To make files visible inside the container you need to mount a host directory
with the -v
option to docker. Choose a directory that you want to use to
import/export files from IPFS. You should also choose a directory to store
IPFS files that will persist when you restart the container.
export ipfs_staging=</absolute/path/to/somewhere/>
export ipfs_data=</absolute/path/to/somewhere_else/>
Make sure docker can access these folders:
sudo chmod -R 777 /absolute/path/to/somewhere/
sudo chmod -R 777 /absolute/path/to/somewhere_else/
Start a container running ipfs and expose ports 4001, 5001 and 8080:
docker run -d --name ipfs_host -v $ipfs_staging:/export -v $ipfs_data:/data/ipfs -p 8080:8080 -p 4001:4001 -p 5001:5001 ipfs/go-ipfs:latest
Watch the ipfs log:
docker logs -f ipfs_host
Wait for ipfs to start. ipfs is running when you see:
Gateway (readonly) server
listening on /ip4/0.0.0.0/tcp/8080
You can now stop watching the log.
Run ipfs commands:
docker exec ipfs_host ipfs <args...>
For example: connect to peers
docker exec ipfs_host ipfs swarm peers
Add files:
cp -r <something> $ipfs_staging
docker exec ipfs_host ipfs add -r /export/<something>
Stop the running container:
docker stop ipfs_host
Docker usage with VirtualBox/boot2docker (OSX and Windows)
Since docker is running in the boot2docker VM, you need to forward relevant ports from the VM to your host for IPFS to act normally. This is accomplished with the following command:
boot2docker ssh -L 5001:localhost:5001 -L 4001:localhost:4001 -L 8080:localhost:8080 -fN
Troubleshooting
If you have previously installed IPFS before and you are running into
problems getting a newer version to work, try deleting (or backing up somewhere
else) your IPFS config directory (~/.ipfs by default) and rerunning ipfs init
.
This will reinitialize the config file to its defaults and clear out the local
datastore of any bad entries.
For any other problems, check the issues list and if you dont see your problem there, either come talk to us on irc (freenode #ipfs) or file an issue of your own!
Contributing
Please see Contribute.md!
Todo
An IPFS alpha version has been released in February 2015. Things left to be done are all marked as issues.
License
MIT