labriqueinternet/torclient_ynh

Tor Client app for YunoHost - No more supported

torclient_ynh's Issues

Not enough entropy with hostapd

Errors with hostapd about the available entropy:

# hostapd /etc/hostapd/hostapd.conf
Configuration file: /etc/hostapd/hostapd.conf
Failed to update rate sets in kernel module
Using interface wlan0 with hwaddr 02:14:d1:a4:88:00 and ssid 'myNeutralNetwork'
random: Only 9/20 bytes of strong random data available from /dev/random
random: Not enough entropy pool available for secure operations
WPA: Not enough entropy in random pool for secure operations - update keys later when the first station connects
Using interface hotspot1 with hwaddr 02:14:d1:a4:88:01 and ssid 'myNeutralNetwork2'
random: Cannot read from /dev/random: Resource temporarily unavailable
random: Only 9/20 bytes of strong random data available from /dev/random
random: Not enough entropy pool available for secure operations
WPA: Not enough entropy in random pool for secure operations - update keys later when the first station connects

I don't know if it's a bug of hostapd or if it's a real problem of this image:

# cat /proc/sys/kernel/random/entropy_avail
81

Upgrade script

We need to add a YunoHost upgrade script.

This should be easy and should look like:

1. stop the service
2. copy files and change settings
3. start the service

CSRF on VPN configuration endpoint

Fix gettext (translation of the web admin)

The web admin is fully compliant with gettext and a po file can be generated, with all of the strings to translate. But, there is a bug and we cannot use translation files. The PHP code in config.php must probably be fixed.

Why tor client do not work only with yunohost

Hi

The tor client need hotspot installed.
But can it not be used without hotspot? So that the yunohost server can have a tor network.

Thanks

[Maintenance ping] Is this app still maintained ?

Hello !

This is a friendly automatic notice from the Yunohost Apps team : our tool noticed that this app is listed in the community/official app lists - but this app appears to be inactive.

Hence, this issue was created automatically to check if this app is still actively maintained.

You are the current maintainer ? 👷‍♂️ 👷‍♀️

You still actively maintain this app ? 🎉

Please close this issue to signify that you still actively maintain this app. Nothing else, and thank you for your work ❤️ !

You don't intend to maintain this app anymore ? 😢

Either don't do anything, or add a comment to explicitly state that you do not intend / have time / ... to maintain this app (but thanks for your work so far ! 😘). After 15 days, if this issue is still opened, the app will be considered unmaintained.

You wish to become the new maintainer of this app ? 😄

You are welcome and free to comment in this thread that you wish to become the new maintainer, and/or to create the corresponding pull request to fix this issue ! (If you do not already have commit rights on this repo, we can then arrange things with the rest of the app team. 😉) Once this issue is closed, the app will then be flagged again as maintained !

GPG warning with Jessie repo

Since we changed the release from Wheezy to Jessie, we have this warning (non-blocking) at the installation step:

W: GPG error: http://deb.torproject.org jessie InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 74A941BA219EC810

French translation

We need to translate this app into French.

For that, just use poedit and fill the fields:

poedit sources/i18n/fr_FR/LC_MESSAGES/localization.po

Save and and propose a PR with the po and mo files generated in sources/i18n/fr_FR/LC_MESSAGES/.

Compliance with systemd

The first release of the Internet Cube should use Debian Jessie. Because we use a sysvinit service, we need to convert it to the systemd format and replace all the "service" commands by "systemctl". Status commands must be replaced by the is-active option.

Do not use "yunohost app setting"

Currently, all settings are stored thanks to "yunohost app setting". This command is very slow and the YunoHost contributors advise us to not use it so intensively because they cannot improve its time performances.

Instead, we should use our own yaml/json/xml file. This will hugely speed up the boot time, and the response time of the web admin.

Replace wheezy sources by jessie ones

Wheezy sources are still used here: https://github.com/labriqueinternet/torclient_ynh/blob/master/scripts/install#L35

We should use the jessie ones.

Clocksource errors

Lot of errors about the clocksource in syslog:

May  2 18:29:32 olinux kernel: [21210.505847] clocksource hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 36755008599 ns
May  2 18:29:32 olinux kernel: [21210.914132] clocksource hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
May  2 18:29:38 olinux kernel: [21217.077813] clocksource hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 21718868714 ns
May  2 18:29:39 olinux kernel: [21217.329488] clocksource hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 15927170388 ns
May  2 18:29:39 olinux kernel: [21217.687500] clocksource hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 21718868714 ns
May  2 18:29:39 olinux kernel: [21217.863752] clocksource hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
May  2 18:29:40 olinux kernel: [21218.405491] clocksource hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 36755008599 ns